Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 3162 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted (edited)

My swing path is in to out, which is odd for a beginner but I've been watching too many Crossfield videos. I think that's the reason for the trouble: half the time I get a ball that starts up the right and draws to left of target further than I want. The other half of the time the ball starts right and stays right. This I expect must be due to mild variation in the clubface - if it squares up to target I get the over-draw, and if it only squares up to the swing path the ball stays right. Slices don't really happen with me.

My conclusion is that I am not yet able to control the clubface well enough to handle this much in to outness.

I might have a solution but this is one of those situations where I have to concede that asking for insight from more experienced players would be a great idea.

What I will do unless advised otherwise is rotate my hips more which should cause me to swing more left and calm down the in to out path to be more neutral. Would it be better to learn how to swing more "over the top" with my hands and arms instead? Rotating the hips more can add power, so I think that's the better way to go? (Easier for me to execute too.) Or should I learn how to more accurately control how much the clubface squares up? It's such a small difference in degrees I find that quite tricky.

I also noticed that my lead arm is kind of low across the chest at the end of my backswing, pretty pictures would have it a little more up toward the shoulder. Don't know what difference that makes. (Maybe one factor in causing the in to out path. I tried raising it, and still swung in to out...)

Any advice very much appreciated. Thanks.
Even if you think I'm spot on here about adding more hip rotation, that's good to know too. :)
 

Edited by Roenie

Posted (edited)

Please let me know if there are any other reasons why someone would struggle with blocking it to the right (no curvature) half the time and drawing (almost hooking) it back the other half of the time. The only reason I can think of is having a swing path that is too much in to out.

During a lesson (which focused on other things) I was told I swing in to out, so I'm just putting one and two together here.

Edited by Roenie

Posted
51 minutes ago, Roenie said:

Would it be better to learn how to swing more "over the top"

Read more  

no.  you've saved yourself years of practice by skipping the part of the game where you have to get rid of the over-the-top swing.  don't introduce that death blow to your swing and potentially set your self back.  

of course, as is always mentioned, get yourself on video and post to the member swing thread.  

at first thought, you may want to look at grip and setup.  make sure they are consistent swing-to-swing, club-to-club.   I have a similar issue to you and working to make my setup more consistent has created some improvements in that department.    

 

 

:tmade:  - SIM2 - Kuro Kage silver 60 shaft
:cobra:  - F9 3W, 15 degree - Fukijara Atmos white tour spec stiff flex shaft

:tmade: - M2 hybrid, 19 degree
:tmade: - GAPR 3 iron - 18degree
:mizuno: MP-H5 4-5 iron, MP-25 6-8 iron, MP-5 9-PW

Miura - 1957 series k-grind - 56 degree
:bettinardi: - 52 degree
:titleist: - Scotty Cameron Newport 2 - Putter

check out my swing here

Awards, Achievements, and Accolades

Posted (edited)

Oops. I just noticed it says "strong fade" in the title, that was supposed to be "strong draw". I can't edit the title anymore, so I hope it's clear from the explanation in the first post...sorry.

@Lastings: I did not mean trying to actually swing over the top - I wouldn't be doing that, even if it would feel like it to me, I probably wouldn't come close. That said, it makes sense to stay away from that swing thought. Thanks. I'll consider making a swing video. Think I have a camera somewhere.

Getting the setup and grip exactly the same each time isn't easy. I'll keep an eye on it. I do currently struggle with the grip because I need midsize grips instead of standard. I pay a lot of special attention to the grip before I swing, to make sure neither hand is strong or weak, and the clubface is square to target at address. Seems more likely that I just dynamically don't get it squared the same amount at impact. (With my swing path, I need it to be very slightly open to target yet closed to the swing path, at impact, every time...)

Edited by Roenie

  • Moderator
Posted

@Roenie you should start a member thread. Sounds to me like you swing too far out. The academic answer is you need to neutralize that path, but the practical answer as it pertains to your swing requires actually seeing your swing. There are a number of ways to swing too far out d you need to address specifically what you are doing.

Bill

“By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest.” - Confucius

My Swing Thread

Awards, Achievements, and Accolades

Posted

Roenie, I would rather have your problem than what I had when I started. I had a slice that would start right and cross 2 fairways! I could hit the ball a country mile, but the wrong way.

I'd say stick with what you're doing but try to "refine" it. I can't get any more technical than this. When you hit the big hook, you're too "handsy". When you hit the push, you aren't "handsy" enough. I don't know if it's the grip, but that is kind of vital. I'm thinking it may be the timing of your release. I don't know how long you've been playing, but stick with it.

Awards, Achievements, and Accolades

Note: This thread is 3162 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.