Jump to content
Note: This thread is 2757 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

So I was able to get my hands on 8 Precision rifle shafts from before the True Temper acquisition.

IMO these shafts feel much better than post TT rifle shafts or Project X rifle shafts.  I always used the same guy to install my clubs but he retired about 4 years ago and I have since moved to Maine and don't know a soul.  I found a local PGA pro around here who says he is willing to install the shafts for me.  They are pre-cut with the longest shaft being 41", not sure what the shortest is.

These are 5.0 shafts and I am wondering if any special "trimming" is required as is required with PX shafts or other Rifle shafts or can you just cut them to the length you want?

I have done some searching and cannot find a definitive answer, any in-site would be much appreciated!!!

Also does anyone else have any experience with using the older model Royal Precision shafts as compared to the newer Rifle shafts?  I've heard the PX shafts play much stiffer and each shaft weighs exactly the same whether it's a 3 iron or a PW.  As compared to older rifle shafts where each shaft has a different weight and different kick point.

Thanks gentleman!


You will have to determine whether the shafts have a tapered or parallel tip section.  Tapered tips terminate at .355, whereas a parallel tip is a constant .370 for several inches.  A tapered tip will fit, albeit somewhat loosely, in a parallel bore; but a parallel tip will not seat, properly, in a tapered bore.  There are some club heads with a "universal bore" that will accept either.  

In der bag:
Cleveland Hi-Bore driver, Maltby 5 wood, Maltby hybrid, Maltby irons and wedges (23 to 50) Vokey 59/07, Cleveland Niblick (LH-42), and a Maltby mallet putter.                                                                                                                                                 "When the going gets tough...it's tough to get going."

Awards, Achievements, and Accolades

53 minutes ago, rdubya59 said:

I'm pretty sure rifles are butt trim only

Could well be; but my oldest component catalog (2011) offers the rifle iron shaft in both tapered and parallel.  If parallel, there is an additional option vis-a-vis flex.  Either way, the tip has to match the bore.

In der bag:
Cleveland Hi-Bore driver, Maltby 5 wood, Maltby hybrid, Maltby irons and wedges (23 to 50) Vokey 59/07, Cleveland Niblick (LH-42), and a Maltby mallet putter.                                                                                                                                                 "When the going gets tough...it's tough to get going."

Awards, Achievements, and Accolades

They are parallel .370 shafts going into .370 irons. 

Just now, msmalls22 said:

They are parallel .370 shafts going into .370 irons. 

Oh and they're 5.0 FCM which is what I had previously. 


I'd re-shaft one club, something in the middle like a 7 or 8, and see how it feels relative to the others.  That will also give you a hard number regarding the playing length; although you can get a general idea by lining up the new shafts with the current clubs and allowing for a bore depth of 1 and 1/8th.  Plus 3/16ths for the grip cap.

In der bag:
Cleveland Hi-Bore driver, Maltby 5 wood, Maltby hybrid, Maltby irons and wedges (23 to 50) Vokey 59/07, Cleveland Niblick (LH-42), and a Maltby mallet putter.                                                                                                                                                 "When the going gets tough...it's tough to get going."

Awards, Achievements, and Accolades

(edited)

These are the shafts I purchased, as you can see they are 3-PW with the 3i shaft being 41" long (plenty long for me)

I am putting these irons in a 4-AW set.

 

Rifle.jpg

3 minutes ago, msmalls22 said:

These are the shafts I purchased, as you can see they are 3-PW with the 3i shaft being 41" long (plenty long for me)

I am putting these irons in a 4-AW set.

 

Rifle.jpg

I guess my question would be can I just have my guy cut these to the length I prefer (rather than the "default" length from Callaway) and then have them installed.

Edited by msmalls22

Sorry to keep bumping this, basically what I am saying is cut the 3i to whatever length I want for my 4 iron shaft and then have it installed.  4i shaft would be going in the 5 iron, 5i shaft would be going in the 6, ect, ect.  Eventually ending with the 9i shaft going into my PW and the PW shaft going into my AW.  As long as the length is correct I should be good to go.  

When I had them installed last time I had a custom set made, the guy who did it was not a "rifle expert" as others have suggested in different forums.  He just found the length that worked for me, butt trimmed them since they are parallel .370 shafts going into .370 irons and installed them.  They felt beautiful and were the best irons I ever hit!!!!

I am obviously hoping to replicate that as close as I can!


(edited)
2 hours ago, parman said:

This might help. I use Rifle shafts in my wedges and irons. 

597b828476e27_RifleTrimmingchart1.thumb.jpg.fc97cf7f0c87cc84e92ff73003564d82.jpg

 

See attached images below, it would appear they are already tipped.  I know I have put this info in another topic but assuming they are already tipped properly (meaning the 3i labeled shaft has already had 1" removed) then wouldn't it be best to put all of the shafts in the proper iron (4i shaft in my 4 iron, 5i shaft in my 5 iron, ect, ect) and then take the 3i label shaft and tip trim it to go in my AW? According to this sheet a blank is tip trimmed by 7" for an AW, since the 3i should have already been tip trimmed by 1" if I tip trimmed it another 6" then it should be the proper tip for my AW?  If I only trim the 3i shaft I don't have to tip trim any of the others, just put them in the proper iron.  Hopefully this makes sense.  Just don't want to screw this up and waste a lot of money!

Rifle.png

trimmed.jpg

Edited by msmalls22

 That trim chart is no help-- 42" Rifle blank chart for Taylormade rifles. Your Rifles are pretipped and frequencied for Butt cut to .total length.


2 minutes ago, pgone said:

 That trim chart is no help-- 42" Rifle blank chart for Taylormade rifles. Your Rifles are pretipped and frequencied for Butt cut to .total length.

So what would be the best way to make these shafts fit into my irons? If I match each iron with the correct shaft according to the label then I would be left with my 3 Iron shaft and would need to trim that to fit my AW


(edited)
3 minutes ago, pgone said:

Your starting with a 4 iron in your set ?

Yes. 4-AW but the shafts I have are 3-PW. Trying to figure the easiest way to do this. I figure put 4-PW in the proper irons and trim the 3i shaft to fit my AW. 

Edited by msmalls22

4 minutes ago, pgone said:

Tip trim- 3 iron shaft 3 inches - abrade tip - cut to length at butt end..

Trim the tip of the 3i shaft 3 inches? That's it? What is abrade. Sorry I'm not actually doing the work. A friend who does this professionally is. But he isn't a rifle expert. If I tell him to trim 3 inches from the tip of the 3i shaft and then put it in my AW and cut the butt to length he will do that. What is abrade tip? Sorry if it's a dumb question....


Abrade tip = Light sanding on belt sander or easy on a grind wheel. Preps tip for solid install--no flying heads


53 minutes ago, pgone said:

Tip trim- 3 iron shaft 3 inches - abrade tip - cut to length at butt end..

And you're sure 3 inches is the proper amount to trim? Wouldn't it be best to match the 3i shaft almost like the PW shaft except 3/8-5/8" shorter? You're absolutely positive taking 3" off the tip and butt trimming to proper length is correct?


Note: This thread is 2757 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 11: 2/16/2025 Rince and Repeat: Just like yesterday I spent several 5-10 minute sessions working on what I learned on Friday.   
    • Quick update. So, I got the PXG Secret Weapon and I have to say I like it... mostly. (see below) I spent some time with it on the range and I even gathered some data in doors. I'm not going to post data yet, as my swing is still a bit of a work in progress and I'd like to gather some more data after I settle down a little bit more. But here's my review.  First as a driver replacement. ... IMO it is not a replacement, it's clearly more of a supplement... for me anyway. Not long enough to really replace the driver. For me it's about 20 yards short of my driver. It is longer than my 30-wood off the tee. (15 yards-ish) I will say it is easier to hit off the tee than my 3-wood. I get some of my best shots teeing it low, but I also get some of my worst. If I tee it about a full inch off the ground I get very consistent shots. Super repeatable. Amazingly repeatable even with my messy swing. Off the tee, I find it draw biased just a bit. You can tinker with the set up if that isn't your personal cup of tea.  As a 3-wood replacement. For me it's about perfect. It's longer than my 3-wood off the deck (my data showed 10 yards longer) and it has a gentle fade to it, which I love. You do need a clean lie, but I never hit my 3-wood off anything but a clean lie anyway. I found it interesting that I hit a gentle fade off the deck and a slight draw off a tee. I'm sure that's not uncommon. Again, you can tinker with the set up to optimize that if you wanted to... I don't want to.  It's clearly a lot longer than my 3-wood off the tee. Easier to hit off the tee than my 3 wood, and off the deck it's also longer. So, it's a no-brainer 3-wood replacement for me. I will say that over the years I've learned to use my 3-wood for this low-flying-100-yard-punch-out-from-under-a-tree shot.  I'll have to see if the Secret Weapon can handle that duty. But it's going in the bag to replace the 3-wood.  I also turned my 5-wood down from 19 degrees to 17 degrees. ... Incidentally my 3-wood had been 16 degrees. I used to always hit my 5 wood and my hybrid about the same distance. This adjustment helps my gapping a bit at the top of the bag. I can clearly hit my 5-wood farther than my hybrid now.  Overall on the PXG Secret Weapon. The good: It's clearly longer and easier to hit off the tee than my 3-wood. It's a bit longer off the deck than my 3-wood.  It's super forgiving... surprisingly so.  It's uber adjustable. ... Although I do suggest getting fit for it. That will save you having to (or wanting to) buy a weight kit just to try out the infinite number of set ups. The headcover is super cool.  The maybe not so good: Shots out of the middle sound great. Shots off the heal sound great. Shots off the toe sound ... what's the work... clangy? It's very forgiving off the toe and the heal. The flight and the distance are incredibly consistent. But the sound off the toe isn't great.  For me I tend to draw it off the tee and fade it off the deck. You can set it up to be biased either way, but in my hands I think if I set up a draw off the deck, that might induce a duck hook off the tee. ... In fairness that could also be where my swing is at right now.  It's pretty spendy. ... If I really stop and think about it, I paid $450 for a new 3-wood. Granted it's a better performing 3-wood. But for me it's really a 3-wood replacement.
    • I've got my pain mostly under control and the meds are working.   I'd like to join. 
    • I would definitely attend if my calendar allows.
    • Finland: I've played Mid-Night Golf in Finland. Really cool. I looked at the schedule for my week out there and I saw that we were teeing off at 9PM... Feels weird, 9 PM tee time. But it was really great. We finished well after 1AM and sat around and drank on the golf course terrace. It was cool. It's really easy to loose track of time when the sun doesn't set.  Here's a picture of me in Finland hitting my approach on the final hole. It's roughly 1:30AM in this photo.  Egypt: Another cool experience was playing golf in Egypt. The entire course is sand. The greens are called browns, cuz they are just sand with oil poured on them and pounded down a bit. Your ball gets kind of oily when you putt, but the caddy cleans it for you after each hole. You carry around a little piece of fake grass (maybe 2 foot square) and place your ball on it each time before you hit. That is except when you go into a sandtrap. The sandtraps are just areas marked off where you don't get to use your little piece of astro-turf. Sometimes they are dug down a bit to make a bunker, sometimes not.  Spain: No special events or anything, but I played a bunch of golf in Spain in the mid-1990's. At that time Spain's economy wasn't doing the best and Europe hadn't quite switched to the Euro. So Spain was using the Peseta. The country of Spain has some incredibly breathtaking courses. (incredible scenery in general) But because of the conversion from the dollar to the Peseta (If memory serves it was 150 to 1), I got to play them for what I remember as being incredibly inexpensive prices. Gorgeous country and really nice people.  Holland or The Netherlands: I lived for a couple of years in what's called The Flevoland in Holland. It's one of the Dutch provinces and it's all land that was recovered from the sea. So, it's all under sea-level. One of the courses I played a few times out there had flags on every hole to show just how deep the water would be if it wasn't for the dams. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...