Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 3040 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Background: A while back I got my driver shortened and to keep the swingweight the same, the shop added weight to the head with what I think was lead powder.  Last week most of it fell out and now there's something rattling around in there.  I hit it into my net, and even though it looked like it was launching a little low on video, I still seemed to swing it fine and contact felt good.

Problem: So I went to the range and after I had hit my wedges and 6/7 irons fairly well, I jumped to the driver and made what felt like good contact only to see that the ball got ZERO height.  Absolutely none.  Maybe 15 feet only because the range takes a dip right after the hitting area.  After this happened several times, I got curious and hit my 5 wood.  It's not the best I ever hit that club, but when I felt like I made good contact, the ball flight and distance were exactly like I expected.  Normally I'd assume it's the indian, not the arrow, but I can't help but wonder if the weight falling out of the head has anything to do with this since it didn't happen with any other club.  I plan on getting the driver weight fixed, but the shop that did it closed down and the other one around here is further and only open while I'm at work.  Any input on this would be appreciated!

Diego’s Gear
Driver: Callaway Great Big Bertha at 11.5*
5W: Taylormade Jetspeed 19*
Hybrid: Ping G5 22*
Irons: Mizuno MX-23 4-PW
Wedges: Cleveland RTX 2.0 50*, 54*, 58*
Putter: Ping Ketsch 33”
My Swing: https://thesandtrap.com/forums/topic/93417-my-swing-foot-wedge/

Awards, Achievements, and Accolades

  • Administrator
Posted

Kinda impossible to say without video or something.

If you twist the head it's firmly attached, yes?

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted

OK, to get back to your OP, how do you know "most of it fell out"? I can understand feeling weird with something "rattling" in the club, but my original question stands. I've had that situation myself.

Your clubfitter did you exactly right in increasing the swingweight for the shortening of the club. I did the same thing, only home grown without adding weight, I didn't find out about that until later. I swatted the ball all over the lot, Had absolutely no feel for the club head!

I'd take the club back to whoever did the work and tell them what's going on!

Awards, Achievements, and Accolades

Posted (edited)

I'm positive that your driver was shortened by being tip trimmed instead of butt trimmed, that makes the shaft play a lot stiffer and lowers ball flight quite a bit if it was more than an inch trimmed. If that is the case and the shop also added powder in the shaft or clubhead then I'd go to a different shop if I were you. Tip trimming to shorten it instead of butt trimming and adding powder in clubhead/shaft instead of adding lead tape on the head is just bad club repair.

Edited by golfdu

Frankie


Posted

you simply do not have enough upward trajectory on your clubhead as it makes contact with the ball,the plane or trajectory of your clubhead + loft of club + deg's for open face at impact -  deg's for closed face at impact = ball trajectory, you have to be hitting the ball with a slight downward clubhead swing plane , which is caused by playing the ball back too far toward your right foot, causing you to hit on the down stroke , instead of the upstroke, spray some shaving cream on the club path around the ball and you will see, the clubhead will cut through the cream showing your path, if you think it's the club being too light causing it put some lead tape on the back of the clubhead it's cheap


Note: This thread is 3040 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
    • Day 6 - 2025-12-25 10 minutes of swing work on the mat and net. Focus on turn and weight shift.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.