-
Posts
183 -
Joined
-
Last visited
Everything posted by nickel_aTm
-
I've got a Ping G20 (neutral, non-adjustable) 10.5* with factory TFC stiff shaft. Real good condition. $50 shipped. Message me if interested and I'll send some pics.
-
Why Replace My 20 year old forged cavity back irons?
nickel_aTm replied to Midpack's topic in Clubs, Grips, Shafts, Fitting
This isn't rocket science. Nevemind the loft changes. You'll adjust as you get used to distances today's irons at today's lofts go. But why wouldn't you want irons that are far more forgiving? I have some late-90's forged Titleist 735CM irons that I'll pull out every once in a while and I'm reminded the massive difference in forgiveness despite loving their look and feel. -
PGA Superstore FAIL
nickel_aTm replied to CR McDivot's topic in Balls, Carts/Bags, Apparel, Gear, Etc.
I don't work in the golf industry and don't have a pga Superstore nearby. Not saying they were right or wrong. But if you found a nice deal online, why didn't you just pull the trigger and order as opposed to driving 60 miles?- 17 replies
-
- brick & mortar
- ads
-
(and 1 more)
Tagged with:
-
It's all about the preferred trade off, as I've played both. AP1 will be slightly more forgiving and consistent. With the AP2 you lose a little bit of consistency and distance but get that great feel of forged equipment, ability to work the balll more, etc. i don't try to work the ball a ton and don't hit it very far, so AP1 was my choice .... Until I got fitted for Callaway XR irons a while back -- which I hit better than both AP models for whatever reason.
-
SGI irons for a 9.9 HI...
nickel_aTm replied to onthehunt526's topic in Clubs, Grips, Shafts, Fitting
My current index is 10.3 and just got fitted. Was playing Titleist AP1 for the last three years, which I was fitted for back then. Just went in last week with no expectations, just wanted to see what I hit best. For me, the Callaway XRs were by far the best -- a club longer than the rest (a couple TMAG options, a Mizuno cavity back, Ping G30, and newer AP1). With regard to your budget, maybe you could find some used on eBay. Obviously would recommend hitting some at a golf retailer first. -
Rather than buy new wedges, I'd just stay down on the ball.
-
Change my old Pings Zing 2 for G25??
nickel_aTm replied to Alejandro Nieto's topic in Clubs, Grips, Shafts, Fitting
At minimum, I'd go to a retailer and hit some in the bay or simulator to compare against the classic Zings. I trust you'll like the newer technology. -
Winter gloves yes or no?
nickel_aTm replied to aviva's topic in Balls, Carts/Bags, Apparel, Gear, Etc.
@aviva Another Texas guy here. I have a pair of black FJ winter gloves and love 'em. Best 20 bucks I've spent, though only needed them once thus far in Houston. -
Like any other driver, we should test it well and/or be fitted before pulling the trigger. I've got an SLDR (12*). I messed with it a bit but reverted back to the neutral settings and am pleased. I picked up some distance (would guess 8-10 yards on average) over my Ping G20. Like the look. Like the trajectory. What I like most is the lower spin. Balls don't seem to get as crooked as before if I hook or cut unintentionally and I KNOW it doesn't balloon into the wind like previous drivers I've owned. All that said, there are others obviously who have hit SLDR drivers and can't stand them. Reverting back to my initial statement. Try it out and see if the shoe fits. I'm glad I did.
-
A couple guys I play with (both in the 5-7 handicap range) were fitted closer to your setup -- i.e. stiff with driver, 3-wood, hybrid but regular shafts in their irons. And I know they both have more club head speed than me. I've never had a lesson in my life. It's a compact swing, which I think is a little quick with the transition and load. Maybe that's the reason I felt better with the S300's.
-
@Playah No, I didn't take demo sets on the course. We relied on the Trackman, which obviously was hit outdoors. Yes, I hit the R300 a bit further (sometimes), but nothing significant. I'm no great player and my swing obviously isn't grooved like a tour player or anything. But compared to the S300, my swings with the R300 were less consistent in terms of both distance and accuracy. Hitting the 6-iron, R300's would go anywhere from mid-150's to mid-160's and the S300 seemed to consistently hang right in the middle. At the end, we switched back and forth -- hitting a few with one, and then the other. For whatever reason, same thing kept happening. If it matters, I don't recall what my swing speeds were with the irons but when I was hitting drivers (didn't buy one, by the way) all but one or two of my swing speeds were in the 98-103 range. And for the record, I'm not an ego guy. My driver, for example, is a regular flex and has 12* stamped on it. I'll hit a damn senior flex if it feels like I get the most out of my swing.
-
@RaCs I was fitted for the first time a couple years ago. Though I certainly thought highly of Titleist equipment, I didn't go into the fitting with any preference as to OEM or model -- I just wanted the best "fit" for me in terms of look, feel, and of course performance. The training center I went to isn't "married" to just one or two OEMs, so they literally tried several options with me -- Taylormade, Titleist, Nike, Adams, Callaway, etc. I ended up with the Titleist AP1 (712) and have zero regrets. Regarding the shaft, my situation was very similar to yours both in terms of higher ball flight and a swing speed/load characteristics which fell in between some shaft flex (R vs S) depending on the brand. Ultimately, we settled on Dynamic Gold S300 shafts over the KBS equivalent. While I lost just a little distance with the S300 compared to the R300 (per trackman), I felt more comfortable with that shaft. In theory, the S300 is slightly too heavy/stiff but the ball flight was lower (which I wanted) and the consistency (lack of dispersion) was better. Good luck!
-
Golf pride multi-compound grip question
nickel_aTm replied to techrx's topic in Clubs, Grips, Shafts, Fitting
I really like the multi-compounds with cords because I prefer not to wear a glove. And in hot humid Houston summers, they may a big difference compared to some others. I like how those feel -- a LOT. Used to have them on my driver/3 wood/hybrid. But I found them to wear much quicker than multi-compounds. My grip pressure might be a little firm, but it's not like I'm squeezing the shite out of the club or anything. -
Exactly why we should hit 'em before buying. Like you said, I'd be about 99% sure the shaft was the difference. Guess I'm lucky the SLDR S's Fukijura "fits" me.
-
Golf pride multi-compound grip question
nickel_aTm replied to techrx's topic in Clubs, Grips, Shafts, Fitting
I've messed with some others but always liked the Golf Pride multi-compounds the most overall. I had this version on my irons and driver for probably two years before they started looking dirty (probably 75-80 rounds), but they were definitely in need of replacement. Recently put these on. A little color without being gaudy. -
@vangator To opine on one of the suggested options, I picked up an SLDR S a few months back, which replaced my Ping G20. I picked up some distance (probably 10-15 yards on average). I don't hit it very far and normally don't get too crooked. I knew the SLDR was designed to launch higher with less spin. Less spin also means less side spin. I've noticed a little less hook or cut on bad swings. Better distance + more fairways = happy camper. Obviously, would go hit a couple options at a local retailer before pulling the trigger.
-
I can't stand the combos that Matt Kuchar rolls out. To me, he was equally bad as Jim Furyk but those brutal 5 Hour Energy hats give the "edge" to Jimmy Furyk.
-
how do you choose your 14?
nickel_aTm replied to tiger187126's topic in Clubs, Grips, Shafts, Fitting
See signature... Occasionally replace hybrid with a 3-iron. -
Blade the tap in or pick it up. We don't mess around. Like to play in under three hours. The exception are the money games where there are no gimmies unless the ball is literally sitting on the lip.
-
I like that concept. Think I will try it. Similarly in terms of incentive, if I see I've got a straight forward pitch from just off the green I don't even take my putter. If I can't hit a simple pitch inside the leather, I have to putt with a bladed wedge as my punishment. Usually works out fine.