Jump to content
IGNORED

Club path just beyond impact


Note: This thread is 5636 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I had feedback from a fellow player that my club's swing path (on the driver) hits the ball at is apex and then proceeds to curve back towards me. He recommends, instead, to extend the club head path beyond the ball along the target line. I use a one plane swing, if that makes any difference.

STR8 Dymo 10.5
Dymo 3W
Mid Rescue 3
MP-33 4-PW
Eidolon 52* GW LW, SW Titleist Bullseye Putter

Link to comment
Share on other sites


Either way I try to extend out and through the ball.

If you can imagine looking straight down on a ball and seeing 4 quadrants I try to hit the quadrant that is closest to my right foot (as a right handed golfer) and push it out and away from me.

That is where my club head travels through at impact though of course when the arms can't extend any further the club head snap around.

So basically the club head is traveling down and out at impact.

Certified G.O.L.F. Machine Addict

Link to comment
Share on other sites


Everything should be moving toward the target with full extension. I try to swing on one plane as well (I taught myself). My swing thought during my learning process was always extend toward the target. I am always target oriented.

My swing thoughts:

- Negative thinking hurts more than negative swinging.
- I let my swing balance me.
- Full extension back and through to the target. - I swing under not around my body. - My club must not twist in my swing. - Keep a soft left knee

Link to comment
Share on other sites


There is a HUGE debate on the correct path following impact. I believe both are viable, but which is more efficient or effective remains for consideration.

You can:

A) Release down the line.

or...

B) Release low left.

Both options are completely ruined by slinging or flipping the clubhead. Cupping the left wrist destroys the impact alignments. Finally, the path of the club after impact should be a result of the pivot and arm-body motion, not a contrived result. Lateral, or halted body rotation, encourages dtl. Full rotational encourages low left.

Interestingly enough... the two greatest ball strikers used both methods. Ben Hogan released low left. Moe Norman released down the line.

Both however had flat left wrists at impact.

If you want to know more about how to release low left, check out slicefixer on golfwrx.

MiniMoe, it's neat to see someone doing well practicing the Moe Norman swing. I often wondered if Graves and his academy was full of it or not. Question answered.
Favorite Practice Course:
Z Boaz Municipal, Fort Worth <<< Ben Hogan grew up playing here!
--------------------------------------------------

In the bag: 983E 9.5*, Fuji Speeder S RPM LP, 4W, Neutral Bias STAFF Ci6 irons, S (going up for sale soon) Tom Watson PVD 08 Wedges (G.S,L)... and a 4...
Link to comment
Share on other sites


kc8kir - Those guys did not teach me... I taught myself by watching Moe in person and asking questions and on Video. I have been to one of their golf schools. They are great teachers, but very technical.. too much so for me. I learned through feel and imagination. I am not exactly like Moe, but pretty close.... And loving every minute.

My swing thoughts:

- Negative thinking hurts more than negative swinging.
- I let my swing balance me.
- Full extension back and through to the target. - I swing under not around my body. - My club must not twist in my swing. - Keep a soft left knee

Link to comment
Share on other sites


I thought you don't have to worry about club head path because the face will natually be closing without you doing anything, or whatever you try to do. Except of course you grip it tight and try to manipulate the club.
I believe that is the reason they make head offset from the shaft center. This is a dynamic behavior I learnt from other design experience.
Link to comment
Share on other sites


I thought you don't have to worry about club head path because the face will natually be closing without you doing anything, or whatever you try to do.

Path matters a whole lot dude.

Imagine if you yank your club head way inside of your target line with a close club face......... dead pull left.

Certified G.O.L.F. Machine Addict

Link to comment
Share on other sites


Path matters a whole lot dude.

Yes. I meant once you selected a path, no need to worry about how it closed. It will always be in a circular path. It is just a matter of long or short radius. However, if you snap the face closed or hold tight to leave it open relative to the path, you will have hook or slide.

Link to comment
Share on other sites


Yes. I meant once you selected a path, no need to worry about how it closed. It will always be in a circular path. It is just a matter of long or short radius. However, if you snap the face closed or hold tight to leave it open relative to the path, you will have hook or slide.

Are you talking about how flat or how upright a circular swing is?

That makes a big difference as well. Its near impossible to lag enough and compress the ball enough with a severely flat swing.

Certified G.O.L.F. Machine Addict

Link to comment
Share on other sites


Yes. I meant once you selected a path, no need to worry about how it closed. It will always be in a circular path. It is just a matter of long or short radius. However, if you snap the face closed or hold tight to leave it open relative to the path, you will have hook or slide.

That's what I thought you meant, and I agree. It's a mistake to try and manipulate the club in a certain way in or after contact, the clubhead path is a natural consequence of previous actions.

I'm working on lengthening my radius by asking Tiger's question, "how far can I get my right hand from my right shoulder at the top?". A wide arc on the right plane with proper wrist action goes a long way to ensuring a good follow-through.

Driver: Cobra 460SZ 9.0, med.
3 Wood: Taylor stiff
3-hybrid: Nike 18 deg stiff
4-hybrid:
Taylor RBZ 22 deg regular
Irons:5-9, Mizuno MP30, steel
Wedges: PW, 52, 56, 60 Mizuno MP30
Putter: Odyssey 2-ball

Link to comment
Share on other sites


The hosel is at the heel instead of other places so that the head will follow a natually closing path relative to the CG without you doing anything. A club has it real CG hanging in the air much like a boomerang so that you can predict it's natural flight path once you set it in motion. That's why the more you try to manipulate with your hands, the less accurate you will get.

BTW, I am working on connecting my right elbow with right hip as a mean of steadying the turn center and allow me to grip lighter in the left hand (i am righty). I seems to have a more stable swing form and gained yardage. Will see how that goes.
Link to comment
Share on other sites


He recommends, instead, to extend the club head path beyond the ball along the target line. I use a one plane swing, if that makes any difference.

I to have a one plane swing and i try

to go dead along my target line right after i make contact.

In My Hank Haney IJGA Bag
Driver: FT Tour 9.5 w/ Aldila Voodoo Stiff
3 Wood: i15 15.5 w/ avixcore red stiff
Hybrids: Rescue 09 19, 22 w/ fujikara fit on stiff
Irons: 4 & 5 MP-52, 6-PW MP-58 w/ KBS Tour Stiff Wedges: MP T-10 52*, 58* w/ KBS Tour StiifPutter: Fastback 1 34 inBall: : Pro...

Link to comment
Share on other sites


I have a small book called "Golf Swing Master Key Explained". In it the author, Noel Thomas, is of the opinion that a proper on plane golf swing will always result in a slight draw. He explains the path thusly:

For a draw, the correct path for the center of the clubface is from inside
the target line to impact to outside the target line to back inside the target
line. This is commonly referred to simply as an inside-out swing. To get the
correct picture of this clubhead path in your mind, you must understand that
the center of the clubface does not come back inside quickly. Even if you
swing inside-out only a little, the center of your clubface must continue on
that path, taking the entire clubhead outside the target line, and extending
toward a point to the right of your target. How much that point is to the
right of your target, of course, depends on how much inside-out you swing.
Your clubhead should come back inside the target line only when you are
well into your follow through.


It makes sense. The plane is at an angle to the target line so to actually follow straight down the line is not possible unless you do some contortions with your body and arms. But I don't think this explanation really contradicts the idea of keeping the clubhead following down the line. "Following down the line" is just a thought to keep one from making some kind of sharp turn to the inside.

My Clubs
Nicklaus Progressive XC Irons: 3H,4H, 5-GW
Ray Cook SW & Gyro 1 Putter
Taylor Made Burner Driver 10.5
Taylor Made V-Steel 3 & 5 MetalsMy Home Course: Indian RiverMy Blog: Rant-o-Rama-Ding-Dong

Link to comment
Share on other sites


Note: This thread is 5636 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...