Jump to content
IGNORED

WSU Cougar Driver...

TheGeekGolfer
 Share
Note: This thread is 5111 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

TheGeekGolfer Dedicated Member

TheGeekGolfer

So, I did a trade with a fellow 'Sand Trap' member my Ogio Schling bag (used) for a Ping Craz-e putter and an R7 Quad driver (both used). The trade was good, I think it worked out well for both of us. John was great to work with and got the stuff shipped out very fast. The driver was a little dinged up, so I gave it my own custom paint job. I'm a WSU grad, so I went with a Crimson / Gray color scheme - what do you guys think?



In my :nike:  bag on my :clicgear: cart ...

Driver: :ping: G10 9*    3-Wood: :cleveland: Launcher
Hybrid: :adams: 20* Hybrid      Irons: :ping: i5 4-GW - silver dot, +1/2"
Wedges: :cleveland: 56* (bent to 54*) and 60* CG10     Putter: :ping: Craz-e (original blue)

Link to comment
Share on other sites

calvie7 Established Member

calvie7

Where did you have this done?

909D2 - 10.5º
909 F2 3 wood15º
AP 2 3-PW PX 5.5
52º Black Nickle and 60º oil can Both Spin Milled
reg 588 56º White Ice Rossie Z Star Tour YELLOWSG3

Link to comment
Share on other sites

TheGeekGolfer Dedicated Member

TheGeekGolfer

  • Author
Where did you have this done?

Did it myself.

In my :nike:  bag on my :clicgear: cart ...

Driver: :ping: G10 9*    3-Wood: :cleveland: Launcher
Hybrid: :adams: 20* Hybrid      Irons: :ping: i5 4-GW - silver dot, +1/2"
Wedges: :cleveland: 56* (bent to 54*) and 60* CG10     Putter: :ping: Craz-e (original blue)

Link to comment
Share on other sites

PS90 Member

PS90

DUDE! That's awesome! I have a Team Effort Cougar bag, and a bunch of other WAZZu stuff in my bag, but that driver is totally original and cool. How did you do that? - You couldn't have just freehand-painted it on? Could you?

GO COUGS!

The stuff in my bag (i.e. The clubs that I haven't tossed in the pond. Yet.):

Driver: G15
Fariway Woods: Fybrid 5
Irons: Big Bertha Fusion 3-PWWedges: Tom Watson 56 and 60Putter: IN Wack-e

Link to comment
Share on other sites

golfro Great Member

golfro

Very cool. I'm a Husky alumni myself but very cool driver :)

DST Tour 9.5 Diamana Whiteboard
909F3 15* 3 FW stock Aldila Voodoo
909F3 18* 5 FW stock Aldila Voodoo
'09 X-Forged 3-PW Project-X 6.0 Flighted
CG15 56* X-Tour 60* Abaco

Link to comment
Share on other sites

Dad-2-3 Dedicated Member

Dad-2-3

Very nice work.

Go cougs!!

On a separate note I've been looking for a nice looking WSU driver headcover? Were did you get yours?
Link to comment
Share on other sites

sjsconcepts Member

sjsconcepts

That's Awesome! Love to see some local "flair" on golf equipment!

IN THE Nova BAG:
Cleveland Launcher, 10.5, ALDILA VS Prototype 60g S flex
Adams Fast10 3w
Cleveland Mashie M3 hybrid 20.5 S flex 
Ping G5 4-PWSGS 52, 58, 62Ping iwi anser 34"Bridgestone B330-RXS

Link to comment
Share on other sites

golfro Great Member

golfro

Very nice work.

The local shops here in Washington have WSU and UW driver headcovers.

http://www.puetzgolf.com/puetzgolf/text_3.asp#Seattle give these guys a call, i'm sure they'll be willing to ship it over to you.

DST Tour 9.5 Diamana Whiteboard
909F3 15* 3 FW stock Aldila Voodoo
909F3 18* 5 FW stock Aldila Voodoo
'09 X-Forged 3-PW Project-X 6.0 Flighted
CG15 56* X-Tour 60* Abaco

Link to comment
Share on other sites

danieldrieberg Dedicated Member

danieldrieberg

no one has asked so I will. How did you do it. painted stripping process. Such clean lines. Paint used etc. Decals? Very kool

9* Geek No Brainer with red Stiff Gallofory shaft
15* R5 3 wood with Burner shaft
21* 24* Nike CPR hybrid Aldila by you shaft
5-pw Titleist 680 cb irons-SK Fiber graphite shafts
52*, 56*,60* Reid Lockhart Dual Bounce spinner shaftScotty Cameron Newport MidSlant with Tiger Shark GripTM LDP Red balls---used because I'm...

Link to comment
Share on other sites

IcemanYVR Dedicated Member

IcemanYVR

The driver was a little dinged up, so I gave it my own custom paint job. I'm a WSU grad, so I went with a Crimson / Gray color scheme - what do you guys think?

That's really cool... you did an amazing job. Did you use clearcoat?

...maybe I should paint mine Huskies purple

Cheers, Allan

In my Ping Hoofer II bag: Titleist 975J | Callaway Big Bertha 3 Wood S2H2 | Mizuno Fli-Hi 18˚ Hybrid | Mizuno MP-33 3-PW | Cleveland Tour Action 900 54/60 | Ping Anser II BeCu | Titleist ProV1

My Playground: Northview G&CC

Link to comment
Share on other sites

bong_crosby Well Established Member

bong_crosby

Nice.

I played with a guy who had a custom paint job of a naked lady mural on the top of his driver. It was amazingly well done...distracting, but well done.

Whoever came up with the saying, "A bad day of golf is better than a good day at work", is a moron.

Link to comment
Share on other sites

TheGeekGolfer Dedicated Member

TheGeekGolfer

  • Author
That's really cool... you did an amazing job. Did you use clearcoat?

I sanded it using various grades of sand-paper and masked off then primed it with an automotive spray paint primer. I masked off the top of the driver and sprayed about 3-4 (light) coats of automotive spray paint that I found at my local auto parts store. The sharp line for the divider between the gray / crimson was done by masking with a hobby masking tape, it's thinner and designed to go around curves better.

The logos were done with some water-slide 'print your own decals' paper also from the hobby store. The paper I got was for laser printers, but I think you can find paper for ink-jet printers online, too. I hunted around on the internet and found vector art for the 'cougar head' and the 'Washington State' banner logo. I added the script 'cougars' part by auto-tracing a bitmap logo using my favorite drawing program (CorelDraw X4). I put a few coats of clear gloss (once again, automotive spray paint) over all the painted parts. It was a fun little project (my wife thinks I'm a bit crazy sometimes, maybe a little loopy from paint fumes ). I would do a few things differently next time, but overall, I'm pretty happy with it. I'm glad you guys like it. ... if anyone wants a custom paint job, PM me and let's talk.

In my :nike:  bag on my :clicgear: cart ...

Driver: :ping: G10 9*    3-Wood: :cleveland: Launcher
Hybrid: :adams: 20* Hybrid      Irons: :ping: i5 4-GW - silver dot, +1/2"
Wedges: :cleveland: 56* (bent to 54*) and 60* CG10     Putter: :ping: Craz-e (original blue)

Link to comment
Share on other sites

Clambake Great Member

Clambake

Since I'm a Vandal from across the border I'd like to diss all your work here, but my dad was a professor at Wazzu so I'll give you some respect.....nice job!
Link to comment
Share on other sites

Note: This thread is 5111 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept
The popup will be closed in 10 seconds...