Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5542 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I carry 5i - pw .

Then 3H and 4H .

I don't hit my 5i though...

Today I decided to try out my 4i and 5i

and compare it with my 4H .

It feels as if I really have to smack the bejeezus out of my 4i and 5i  for it to "spank" my ball and make it take off well.

My 4H however is much easier to hit.

What is it about long irons that make them hard to hit? Are they the hardest to hit out of all clubs?

Is it because you require a lot tighter timing and swing power?

WHat is the actual proper way to hit them?


Posted

How do you not hit your 5 iron?

:tmade: SLDR X-Stiff 12.5°
:nike:VRS Covert 3 Wood Stiff
:nike:VRS Covert 3 Hybrid Stiff
:nike:VR Pro Combo CB 4 - PW Stiff 2° Flat
:cleveland:588RTX CB 50.10 GW
:cleveland:588RTX CB 54.10 SW
:nike:VR V-Rev 60.8 LW
:nike:Method 002 Putter


Posted

I'm too inconsistent with my 5i, 4i .

If I need a distance of a 5i, I grab my 4H and do a 3/4 swing or choke down.


Posted

they are harder to hit because they are longer. it takes practice. I like hitting my 4i compared to the hybrid because of the ball flight. I like to keep it low and run the ball with the 4i. the hybrid I use for getting out of the rough.

golf is a lot like life. the more you enjoy it, the better off you are. a3_biggrin.gif
 
 


Posted

Funny I am loving the long irons lately.  My last time out I was driving poorly so the 4 iron saw more use then normal.  I was also hitting it well so I went to it for long layups instead of the 5 iron.

The key to the long irons for me is to slow down the swing.  It is a long club that takes longer to come around.  You may look down at a hybrid and get a three wood or driver thought that slows you down.

Awards, Achievements, and Accolades

Posted

Long irons are harder to hit because the sweet spot is much smaller due to lower loft. The key is to keep your head very still and swing smoothly (per above advice). You can also get 3, 4, and 5 irons that are more forgiving (larger club heads) if you really can't hit your current ones.


Posted

There are a lot of reasons why people struggle with them. The shaft is longer so the head is moving faster (or at least it should be) and it's farther away.  Being less lofted, swing flaws that sap power or end up with a misaligned clubhead are magnified. The same misguided impact with a wedge still end up on the green, With a long iron, the ball simply has more time to go off line, whether that's due to aim or spin or both.

You really have to swing long irons with conviction to get them to work properly. Trust your setup and your swing and make a full powerful turn (in both directions). If you try to steer them bad things tend to happen. If you find yourself more worried about where your long iron (btw - a 5 iron is a mid-iron) is going to end up, rather than just thinking about your target, then you might want to stick to the hybrids.



Originally Posted by Sai-Jin

WHat is the actual proper way to hit them?



Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


  • Moderator
Posted

Sai-Jin,

I find with long irons and fairway woods that a relaxed smooth swing will give me the best results.  I don't try and force a hard swing and just let the club loft do the work.

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Awards, Achievements, and Accolades

Posted


Originally Posted by boogielicious

Sai-Jin,

I find with long irons and fairway woods that a relaxed smooth swing will give me the best results.  I don't try and force a hard swing and just let the club loft do the work.


I agree, when I get the two hybrid in my hands sometimes the distance I am going for makes me swing for the fences.  Which results in a 100 yard topped dribbler.

Awards, Achievements, and Accolades

Posted

Slow down and shorten your backswing

In my Ogio bag:
Ping B60 Isoforce,

2 Rusty Callaway wedges w/riffle 6.0,

Ping ISI BeCu w/riffle 6.0,
Callaway Heavenwood 3,

Callaway Big Bertha 4 wood,

and a Ping G10 driver!


Posted

Oh, 5i is a mid iron? LOL

Oh dear, then I'm in trouble. Well, I finally started using my 5i today, it wasn't bad.

Hmm... went to the range yesterday with my 4i and I just tried a new ball positioning... seems to work where

I put my sternum 1inch behind the ball for all clubs aside from Driver then just widen my stance depending which club I'm using (Anyone can confirm this is a good and solid way for ball position?)

I think I'll stick with my 4H raylor and 3H.


Posted

Quote:

... The key to the long irons for me is to slow down the swing.  It is a long club that takes longer to come around. ...


You need decent clubhead speed to hit longer irons properly. Also, you have to use good form and not try to muscle them.

Players who get dynamic club fittings get "cutoff point" information on irons. Dynamic fitting involves several hours of overall swing analysis using computers, launch monitors, etc.

The cutoff point is the place in your iron set where you "hit the wall."  The wall is the point at which can't seem to pick up any more distance by going to the next longer club. People on Sand Trap sometimes say they can't hit their 5i any farther than their 6i. This would be their cutoff point. Clubfitters suggest that you bridge the gap between your "wall" iron and fairway woods with hybrids.

Now, there's a couple of things you can do to increase your longer iron distance:

  • Develop a smoother downswing, and increase amount of lag in your swing. This would help you benefit from the longer club length.
  • Shaft1.  Have a clubfitter softstep the shaft - you put a 2i specification shaft into a 3i, and butt trim it to 3i length; 3i shaft into 4i, etc. This softens the tip of the shaft, and helps you get more whip from the shaft. (According to other posters, you are decreasing the stiffness of the softstepped shafts by about one-third to one-half a flex.)
  • Shaft 2. Get flighted shafts in longer irons (gives extra lift in lower irons).

Naturally, developing a smoother swing costs less than shaft adjustments.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha B16 OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:  image.png.0d90925b4c768ce7c125b16f98313e0d.png Inertial NM SL-583F, 34"  
Ball:  :srixon: QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted

You know what, I was wondering about that myself.

It feels like I have to kill the ball with 5i and up all the way to my driver to

get the ball distance and trajectory I want.

THe easier I swing, the more fat / thin I hit the ball.

But when I bomb it and not worry if I'll push / fade the ball... it goes well.


Posted


Originally Posted by WUTiger

Quote:

You need decent clubhead speed to hit longer irons properly. Also, you have to use good form and not try to muscle them.

Players who get dynamic club fittings get "cutoff point" information on irons. Dynamic fitting involves several hours of overall swing analysis using computers, launch monitors, etc.

The cutoff point is the place in your iron set where you "hit the wall."  The wall is the point at which can't seem to pick up any more distance by going to the next longer club. People on Sand Trap sometimes say they can't hit their 5i any farther than their 6i. This would be their cutoff point. Clubfitters suggest that you bridge the gap between your "wall" iron and fairway woods with hybrids.

Now, there's a couple of things you can do to increase your longer iron distance:

Develop a smoother downswing, and increase amount of lag in your swing. This would help you benefit from the longer club length.

Shaft1.  Have a clubfitter softstep the shaft - you put a 2i specification shaft into a 3i, and butt trim it to 3i length; 3i shaft into 4i, etc. This softens the tip of the shaft, and helps you get more whip from the shaft. (According to other posters, you are decreasing the stiffness of the softstepped shafts by about one-third to one-half a flex.)

Shaft 2. Get flighted shafts in longer irons (gives extra lift in lower irons).

Naturally, developing a smoother swing costs less than shaft adjustments.


Interesting post. I finally got myself a 4H for this reason. I just wasn't hitting my 4-iron any further than my 5, and with mixed results. I kept the 4 in the bag for a long time simply because I'm stubborn, and I've got a pretty decent punch shot with it. I'm much happier with the hybrid, though, and better out of the rough with it, too.


Posted

Sai-Jin, the easy answer (and I know we don't always want the easy answer) is to go get a 5 hybrid. In club fitting there is an established axiom called the 24/38 rule -- which states that very, very few ordinary golfers can consistently hit any iron with a loft of 24 degrees or less and length of 38 inches or more. In the 60s and 70s, that used to be a 3 iron but with the modern marketing trend to stronger lofts it is now the 5 iron in many sets. The Burner 2.0 5 iron, for example, is 24 degrees and 38.25". Good luck with that "mid iron"!

Stretch.

"In the process of trial and error, our failed attempts are meant to destroy arrogance and provoke humility." -- Master Jin Kwon

Awards, Achievements, and Accolades

Posted

good info, thanks.

I think I'll keep my 5i and just do the 4-raylor and 3H R11.

But now that it seems I"m getting better at hitting 4i and 5i , I'm thinking of buying the

real 2i, 3i and 4i for my MP68 set. Just to have fun with them.

btw, those long irons you still hit down on them right? It's not a sweeping motion like the 3W ?


Note: This thread is 5542 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 41, June 14.  I spent 10 minutes, half hitting W half hitting 6-iron, practice shots (indoors, off a mat, into a net)
    • Day 620 - 2026-06-14 Got some work in before and after lessons. Definitely didn't adduct my arms 130° in doing so.
    • Day 79: played 18. Shot a +5 76. Iron play was much better - 11 GIR. Hit a drive 380. Normal day. 
    • Day 14 (14 Jun 26) - Continued work with irons (8i-Pw), hard foam balls and getting consistent impact - same as previous drills - using gates for 1/2 and “simulated” course conditions on the second half.  
    • I like discussing the golf swing. Whether you call it "swing theory" or what, I like to talk about things that can expand the potential for what I know and understand. As a scientist, I like being shown that I'm wrong, too, because as I've said a bunch of times… "you're wrong and here's why" is an instant opportunity to upgrade my knowledge. I also like to help golfers, and one of the things I'm most glad to have moved away from from 15 years ago was the "Hands In" idea from S&T. Jim Waldron is often credited (probably rightly so) with explaining why so many Tour players and good players talk about "keeping their hands in front of themselves" while it appears that they're moving their arms around their bodies. From over 30 years ago: I've also got videos like… this (Instagram link here😞 I'm happy to say that I've become friends with Shaun and Mike at Athletic Motion Golf (AMG), too. I tend to get along with other smart folks who measure things, who look critically at information, who don't assume that what they thought 20 years ago holds true today. I get along with folks who look for chances to instantly upgrade their knowledge. Andy Plummer remains one of the people who does not look for these opportunities. He didn't care in early 2013 when we had evidence that the information in their S&T 2.0 DVDs was bogus, and they seemingly don't care now. They've been attacking (it's their favorite pastime) AMG in particular for the better part of a year now. There have been a few shots back at them from AMG (like… this), no doubt. But as is typical of the AMG fellas, it's with measured data. Well, recently, Andy took yet another shot at AMG: https://www.instagram.com/p/DZfHe0DuPXC/. Andy demonstrates that true power in the golf swing comes from doing stuff like this: Andy claims that the idea that the arms mostly lift and lower, while the body turns, is bogus. What golfers should be doing is using "angular velocity" to abduct and adduct their shoulders to move the club fast like this (above). Then he makes a ridiculous example of what AMG supposedly teaches, but misses by a mile. Now, it doesn't take a biomechanist to know that you can't possibly swing as Andy demonstrates. His right arm is so far around and behind him that his left arm would have to grow several feet to reach the grip of the club (or alignment stick), and a follow-through with the right arm position like that would be absolutely silly. But, it's a demonstration, so let's not read too much into it. However, I find ideas like this dangerous. Again, I like to help golfers, and in my opinion, the idea that you should abduct and adduct your arms a lot is a dangerous one. There's some adduction and abduction going on, but… it's not much. Anyway, this statement was posted: 130 degrees of dynamic range of horizontal abduction and adduction is quite the claim! I posted some comments to Andy and others, and was issued a challenge: Well, okay then. Here's Bryson's lead shoulder adduction: This measures the angle between the "virtual spine," the left shoulder, and the elbow. Bryson has a 97.34° "adduction angle" at P1, a 62.53° angle at P4, and returns to an 89.21° angle at impact. Rounding, that's a change of 34° from address to the top, and then a change (back toward the angle at address) of about 26° from the top to impact. If we want to worry about only horizontal abduction and adduction (where D = adduction and B = abduction): Left shoulder: 8.33° D, 38.74° D, 14.67° D Right shoulder: 1.03° D, 55.75° B, 14.04° B If we call moving the arms farther around you as negative, those are changes of -30.41° from P1 to P4 for the left shoulder and +24.07° from P4 to P7 for the left shoulder and -56.78° and +41.71° for the right shoulder. I have no idea on earth where he gets 130°. From the last frame of Bryson's swing where he's at 126.98°? But the lowest that number gets is 62.53°, for a range of 64.45, or less than half of the 130° claimed (plus it includes part of the swing, post-impact, that has no bearing on what the ball does). For good measure, another pretty good player: Left: 22.55° D ➡️ 33.35° D (∆ 10.8°) ➡️ 17.36° D (∆ 15.99° from P4, 5.19° from P1) Right: 15.03° D ➡️ 24.29° B (∆ 39.32°) ➡️ 1.93° D (∆ 26.22° from P4, 13.1° from P1) Of the biomechanists and experienced 3D users (on any platform), none of them have seen anything like 130° of dynamic adduction/abduction from a good player P1 to P7. And, like my little joke above, even if you go to the end of the swing, you rarely get much more than a little over halfway there. Maybe Andy is adding them? He does say in the video "and then add it to that with the lead arm." (I think that's what he says, but this isn't an additive type system.) I regularly coach golfers out of positions with a lot of adduction and abduction. I regularly work golfers away from moving their arms around their bodies. Even my juniors (the ones who have paid attention anyway! 🤣) can recite "arms = up/down, body = around." Like this: So, I don't know where this leaves us. Andy claims to have seen something on GEARS that shows 130° of dynamic adduction/abduction. I'm open to being wrong, but… I don't think I am here on this one. And, until that comes to be, I will continue to stand up for what I think is the best information, and do my best to work with golfers toward simpler, easier moves that don't get them stuck. Simpler, easier moves like the moves Tour players and great players tend to make, not complicated, difficult moves. Shaun and Mike said it in a video once where they demonstrated that the average Tour player adducts their lead arm 20° across their chest from the top to impact (P4 to P7), while the amateur often tries to go 40°. They said something like "the amateur is trying to move their arm TWICE the distance in the same amount of time as the professional athlete." Yep. The swings of great players are often easier and simpler. They are not abducting and adducting their arms much in comparison to average golfers. As a smart man once said: "Why would you teach something (abduction in this case) that bad golfers already do?" On a related note… the S&T crowd continues to be… well, who they've been as long as I've known them. Take this comment for example: I mean… I would think that this is pretty self-explanatory, but then again… I didn't think it needed explaining to begin with. P.S. As I was finishing up this article, another biomechanist replied with something so simple I hadn't even thought of it as I had immediately jumped into looking at the actual measurements: "90 doesn’t even seem physically possible.“ No, sir. It doesn't.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.