Ping G Driver Wrench

[Frankq]

Evening.... lost my ping driver torque wrench, can I use a callaway or cobra wrench? Or?

 

thank you.

[billchao]

7 minutes ago, Frankq said:

Evening.... lost my ping driver torque wrench, can I use a callaway or cobra wrench? Or?

 

thank you.

I've used my Callaway wrench on my Ping and vice versa.

I've also used a screwdriver with a torx bit. It's T20 or T25. Can't remember off the top of my head.

[Frankq]

Thanks for the tip...👍

[iacas]

So long as the torque level is high enough (without being too high), you should be okay to go. Most of them are around 17 foot pounds, IIRC?

[mywong23]

agree you can loosen and tighten with a torx bit screwdriver, nut driver, rachet....

HOWever, the golf tool has a torque limiter which won't over-tighten the screw.

I guess some of the screws or seating threads are not made of thick steel, perhaps even

aluminum, in which applying too much torque can strip the threads 😞  

[ChetlovesMer]

On 4/29/2019 at 4:43 PM, Frankq said:

Evening.... lost my ping driver torque wrench, can I use a callaway or cobra wrench? Or?

 

thank you.

Short answer: YES