Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4167 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Anybody use Brush-T tees? They are made of plastic with long plastic bristles forming a circle that you set the ball on top of. They are supposed to make for a driving off of grass feeling with less resistance.

I bought some because they came with a free 6-month subscription to Golf Digest, and the idea seems solid; But I'm the only person I've ever seen using one at the course, and I've certainly never seen any pros using them on TV.

Are these bogus? Would I be better off just using cheap wooden tees? I figure at $4 for 3 Brush-T's, they should last through enough drives to be worth the price. So far the one I've been using shows zero wear.

Posted
I was given one once, a 3-Wood version, and I used it for a while when hitting 3-Wood off a tee. It felt OK, but I couldn't modify the tee height. Also, the bristles seemed to fan out a bit after a while.

If you like it, stick with 'em. A benefit they certainly have over most other tees is that you get a consistent tee height. If that tee height is right for you, then it's a good tee.

The tee you use is largely a matter of preference. If you're thinking of trying something else, I suggest the Zero-Friction tees. Many guys here are still on the pack of 50 they bought years ago.
  • Upvote 1

-- Michael | My swing! 

"You think you're Jim Furyk. That's why your phone is never charged." - message from my mother

Driver:  Titleist 915D2.  4-wood:  Titleist 917F2.  Titleist TS2 19 degree hybrid.  Another hybrid in here too.  Irons 5-U, Ping G400.  Wedges negotiable (currently 54 degree Cleveland, 58 degree Titleist) Edel putter. 

Awards, Achievements, and Accolades

Posted
I think you hit one disadvantage on the head, the fixed length. However as you say this can be an advantage because you get to practice with the ball always at the same height from the ground. They come in quite a few different lengths.

Thanks for the suggestion on Zero-Friction. I'll look at my options when and if these brush-t's wear out.

Posted
I cant stand those things, after you use them for a certain period of time, the bristles get worn out and its impossible to put the ball on.

Your standing for 5 mins on the teebox trying to put the ball onto them.
In My Bag

Driver: Sasquatch 460 9.5°
3 Wood: Laser 3 Wood 15°
5 Wood: r7 19° (Stiff)Irons: S58 Irons 4-PW Orange DotWedge: Harmonized 60°Wedge: Z TP 54°Putter: Tiffany 34"Balls: Pro V1 Shoes: Adidas Tour 360 IIThe Meadows Golf Coursewww.themeadowsgc.comAge: 16

Posted
I never want to use these again. They are terrible. Stay away.
WITB

Driver - Taylormade r7 Quad 10.5˚ Fujijura E360 Stiff
Woods - Sonartec SS 2.5 13˚ HST Penley Tour Stiff
Hybrid - Sonartec HB-001 19˚ HST Penley Tour StiffIrons - Mizuno MP-67 Forged 4-PW, DGS300Wedges - Callaway Forged 50˚ and 54˚, Walter Hagen 60˚Putter - Nike T130 O/S Mallet Ctr Shaft 33"B...

Posted
They're OK. If you want consistent tee height they're great. The "technology" of the non-resistance is insignificant. I had 'em. Probably won't buy them again.


 


Posted
The tee you use is largely a matter of preference. If you're thinking of trying something else, I suggest the Zero-Friction tees. Many guys here are still on the pack of 50 they bought years ago.

I have the zero friction tees and they just shatter into pieces every time i use one. Have more of them but a lot of people have said that plastic tees mark your clubs so have stuck with wooden ones. Large packs are very cheap on ebay.

Driver: Callaway Hyper X Tour
5 Wood: Ping G5
Irons: Cobra fp 4-SW
Bag: Powakaddy
Ball: Srixon soft feel


Posted
The zero-friction tees are a big seller where I am, more so than the brush tees. I also, as suggested earlier, have had my zero-friction tees shatter on occasion, but not enough to sway me away from them.

Driver: Cobra S2 9.5 Fubuki 73 Stiff | Wood: Titleist 909H 17 Aldila Voodoo Stiff | Irons: Titleist ZB 3-5, ZM 6-PW DG S300 | Wedges: Titleist Vokey SMTC 50.08, 54.11, 60.04 DG S200 | Putter: Scotty Cameron Fastback 1.5 33" | Ball: Titleist Pro V1x


Posted
I never try and advocate the use of brush t's, but I have been using them for years now. Yes, I agree they do soften up or wear and eventually you have to pitch 'em, but I've been using the SAME ONE, for over 2 years so. . .

My new golfing buddy also uses them. Chance in a million to have 2 guys hitting drivers off of 3wood brush t's, but its happened! If they do "scrunch" up, I've found soking them in warm water for a few and then putting them back in their package gives them a bit more life.

I use reg. wood t's for my 3wood and long iron T shots.

Posted
The zero friction last longer but they do mark the bottom of my superquad.....a little elbow grease and soap and water and the marks do come off though......

Posted
i was using them but switched over to zero friction. my pops uses the orange ones with his nike sumo and bombs it though...

Posted
Yes, I have been using the orange ones ("Oversized"). They are the 2nd tallest ones. The yellow ones are the tallest but they are too tall for my liking and much more expensive.

When I get a good drive, I really bomb the ball too, but that's only when I get a good drive... i'd probably get the same results with a normal tee.

  • Administrator
Posted
The zero-friction tees are a big seller where I am, more so than the brush tees. I also, as suggested earlier, have had my zero-friction tees shatter on occasion, but not enough to sway me away from them.

Never cared for Brush-Ts. Did a review on them, too.

Zero Frictions occasionally break, but by "occasionally" I mean once every 50 tee shots (or more).
The zero friction last longer but they do mark the bottom of my superquad.....a little elbow grease and soap and water and the marks do come off though......

Well, even a painted tee leaves a mark, yeah... I'd rather have a teeny ZF mark (plastic, not painted) than a big red streak across the bottom from a red painted wood tee.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
I never want to use these again. They are terrible. Stay away.

i agree. its a scam lol

-WITB- USGA Index - 1.5
------------------------
Driver --Titleist 907D2 10.5* - Mitsubishi Rayon Diamana Blueboard
F.W. --Titleist 906F4 15.5* - Mitsubishi Rayon Diamana Blueboard
Irons --Mizuno MP-57 - Project X 6.0Wedges --Titleist Vokey Spin Milled 54* 58* - Dynamic Gold X100Putter --Cameron...

Posted
I tried the Brush-T's, found that they were impossible to put the ball on after a few rounds.

Now I stick with Stinger Tees .

In my Grom:

HiBore XLS 10.5 / ProLaunch Blue
Ti Great Big Bertha Warbird 3 Wood
Killer Whale 5 WoodPinemeadow Command 3 Hy Eye 2 + 4-9 Irons 588 RTG 49 "Special", Gunmetal 56, RTG 60 White Hot #5 Tour B330-RXEpoch Tees Royal Oaks Golf Club


  • 2 months later...
Posted

I searched for topics about this but couldn't find any, so sorry if it's been done.

What do you guys think of the brush tee's?

particularly this type:


Posted
I've used brush tees and didn't see any improvements in distance or anything. But then I know people that say they added distance on their drives. I personally think they are kind of overrated, but i don't know, dependes on the player I guess.

Driver: taylormade.gif R11 9*
3 Wood: cleveland.gif Launcher 13* 5 Wood: cleveland.gif Launcher 19*
Irons: cleveland.gif CG1 Black Pearl 3-PW
Wedges: cleveland.gif CG12 Black Pearl 52 & 58 Degree     Putter: cameron.gif California Coronado
http://twitter.com/BFlynn23


Note: This thread is 4167 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 35 (6 Jan 26) - Got opportunity to play today, opted to mix it up - pulled Driver, 3w and 4h, keeping 7w, 5-Pw, 50 and 55 wedges and putter.  Played a set of tees up as well - goal: focus on the irons, especially the scoring clubs.  Had one of the sessions in a while (3 over 39 front, 6 over 42 back (a couple late round poor shot choices)).  Had a blast working a 10 club setup…
    • Day 17 - 2026-01-06 Mix of mat and net work, same focus on trail side and hands. Mirror work again later in the day.
    • Hi all. I have sought permission from admin to post this here. First, here's a quick link to my products on TST, which a few of the mods have been road-testing...  Most of you would be aware of the import tariffs imposed on importers to the US circa September last year. Prior to their introduction, I was selling a decent number each week into the 'States. Since the tariffs came in - which added ~AU$60 to the total cost of getting them over there - sales have dropped to virtually nil. I think fear of the tariffs is the biggest part rather than the actual cost increase, despite me declaring everywhere on my site that we pay the tariffs and have successfully got every order into the US without any problems since. What is still unknown to most US consumers is that these tariffs will DOUBLE in February as Australia Post will no longer be allowed to offer "private" rates, they all change to "commercial". I do indeed think that this will make the products uncompetitive to ship there. So what's the backstory?  I'm a small Aussie business, not some corporate juggernaut. I invented these products - not a reseller for someone else. The import tariffs double in February, so add another ~15% to the total cost. If you want StanceMate alone I can do a super deal on a run-out model PREVIEW HERE (note you cannot purchase this yet. I think the shipped price will be about AU$110 inc Shipping (tariffs included). If you want to reduce the cost of the whole Stryper Plus Bundle I can swap the runout StanceMate to reduce the overall price by AU$60. These work EXACTLY as the newer version, just not as premium quality in the way the finish is achievbed in production) IMPORTANT: All import tariffs are PRE-PAID at my end, and clears customs no problem. I've sent a half dozen since October with every one delivered. NB: I'm not here to get into the politics of the decisions on tariffs, so let's not go down that road. It is what it is! So StanceMate to your door in US - tariffs prepaid - about US$70 Bundle to your door in US - tariffs prepaid - US$240 Bundle (with version 1 StanceMate) to your door in US - tariffs prepaid - US$200 Cheers Corbs
    • Wordle 1,662 4/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,662 4/6 ⬜⬜⬜⬜⬜ 🟨🟩⬜⬜⬜ 🟨🟩⬜🟩⬜ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.