Jump to content
IGNORED

Driver Fitting


Note: This thread is 4855 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

What exactly goes down at a driver fitting and are they really necessary? Is the purpose really just to figure out what kind of shaft you should be using and seeing which driver you hit better/further?
Link to comment
Share on other sites


What exactly goes down at a driver fitting and are they really necessary? Is the purpose really just to figure out what kind of shaft you should be using and seeing which driver you hit better/further?

When I went for Driver fitting, we went through a variety of different club-head types and shafts. Switching out the old driver for the new one added distance right off the bat for me.

-- Michael | My swing! 

"You think you're Jim Furyk. That's why your phone is never charged." - message from my mother

Driver:  Titleist 915D2.  4-wood:  Titleist 917F2.  Titleist TS2 19 degree hybrid.  Another hybrid in here too.  Irons 5-U, Ping G400.  Wedges negotiable (currently 54 degree Cleveland, 58 degree Titleist) Edel putter. 

Link to comment
Share on other sites

Awards, Achievements, and Accolades

I went in today for fitting and was surprised how much better a shaft suited for my swing helps. I took 2 of my drivers in
TP 8.5 burner matrix shaft
909d2 with a graphite design stiff

For me the burner was the wrong launch angle. I dont remember spin and angle numbers but I was getting 250-260 with another 20 yards roll.

The Titleist was more spin and high launch angle. I was getting 260-270 with another 15-20 yards of roll.

My swing speeds was around 103-105 on his monitor.
He determined to change the shaft in my titleist because of the torque in the factory shaft and the shaft was not stiff enough.
I gained another 20+ yards from the change. But what I really liked better than that was my shots were not all over the place. My shot pattern tightened up.
I hope this helps. Because he sure helped me today.
Link to comment
Share on other sites


If you get a fitting at a location where they have either a lot of clubs or, even better, have the fitting systems that allow the same clubhead to be switched out with different shafts you'll get a lot out of a fitting. I recently went through it at a Golf Galaxy that had the Callaway, Titleist and Nike fitting carts, as well as an entire store of inventory for me to test different heads and shafts. I'm glad I did this because the perfect fit for me ended up being a head and shaft that is not common pairing (at least on shelves in retail stores). Have an idea what you want to try. Shafts are the biggest difference, so try what you like in different shafts. Try not to have any prejudices against a particular brand/model, though, as it might surprise you with the correct shaft and head combination.

One thing to watch out for it the tee height during fitting. They set me up with a tee that was way to high and it caused all of my shots to be too high and fade/slice. Once I got a good tee height for me things went much smoother.
Driver: SQ DYMO STR8-Fit
4 Wood: SQ DYMO
2H (17*), 4H (23*) & 5H (26*): Fli-Hi CLK
Irons (5-6): MX-900; (7-PW): MP-60
Wedges (51/6*): MP-T Chrome; (56/13): MP-R ChromePutter: White Hot XG 2-Ball CSPreferred Ball: e5+/e7+/B330-RXGPS Unit: NEOPush Cart: 2.0
Link to comment
Share on other sites


Does anyone know how much this (driver fittings with multiple heads/shafts with launch monitor) costs at a place like Golfsmith? Or a local pro shop? (Sorry to go offtopic).

In my Ogio Ozone Bag:
TM Superquad 9.5* UST Proforce 77g Stiff
15* Sonartec SS-2.5 (Pershing stiff)
19* TM Burner (stock stiff)
4-U - PING i10 White dot, +1.25 inches, ZZ65 stiff shafts55*/11* Snake Eyes Form Forged (DGS300)60*/12* Snake Eyes Form Forged (DGS300)Ping i10 1/2 MoonTitleist ProV1

Link to comment
Share on other sites


Does anyone know how much this (driver fittings with multiple heads/shafts with launch monitor) costs at a place like Golfsmith? Or a local pro shop? (Sorry to go offtopic).

A lot of the shops do a refund or partial refund if you buy the club from them. I know the place I go to charges $75 but refunds you $40 if you buy a club/shaft, so the cost is $35 which is well worth it.

Nike SQ 9.5 w/ ProLaunch Red
Titliest 906F2 15
Miura 202 3-5 Irons
Miura Blade 6-PW Irons
Mizuno MP 51 & 56Yes! Tracy IINike One Black

Link to comment
Share on other sites


Were you guys hitting inside with a monitor or outside? I just went to PGA Superstore to get fitted but I think everyone else had the same idea, it was packed... I will have to wait since they are closed tomorrow for Easter

apex53
In my bag:
Titleist 913D3 9.5
Titleist 913F 15

Titleist 913H 19, 913H21

Titleist 712CB 5-P Titleist Vokey 54, 58 Scotty Cameron Fastback Titleist ProV1x

Link to comment
Share on other sites


Does anyone know how much this (driver fittings with multiple heads/shafts with launch monitor) costs at a place like Golfsmith? Or a local pro shop? (Sorry to go offtopic).

It depends on how much equipment they have for you to test. My guy charged $75 but he had a boatload of different shafts ranging from Aldila to Matrix. As for the original question, a driver fitting is like any club fitting. The more dialed in it is, the better opportunity it gives you to play better. FWIW, a good fitting will measure the exact CPM of the shaft you should be playing with, along with length, grip size and driver head and loft. Some heads are made to spin more, some less just like shafts. You can also get your shaft pured so that the flex point is always the same. Believe me, it may not sound like much but an eight to ten yard gain is huge.

Titleist 905T Accra SC75 M4 Shaft

Nike SQ 4W Accra T70 M4 Shaft
HB001 17* Hybrid with Mitsubishi Diamana Thump X Stiff Flex
Baffler Pro 20* Accra Axiv 105 Tour Hybrid Shaft

Taylor Made 24* Burner Accra Axiv 105 Tour Hybrid Shaft

Mizuno MP-32 5-PW Black Oxide Finish Project X 6.0 Shafts

Vokey 52* Oil Can Finish TTDG S400 Shaft

Cleveland 588 60* TTDG S400 Shaft

Rife Bimini Blade Putter

 

Ball-White and Round

 

Link to comment
Share on other sites


I'm convinced that fitting is a must... I've been fitted for irons but not a driver... $75 doesn't seem like a lot of money to invest to ensure that you get the proper specs... Especially if you can go to the course knowing you're playing the correct equipment...

apex53
In my bag:
Titleist 913D3 9.5
Titleist 913F 15

Titleist 913H 19, 913H21

Titleist 712CB 5-P Titleist Vokey 54, 58 Scotty Cameron Fastback Titleist ProV1x

Link to comment
Share on other sites


At the Golf Galaxy where I got my driver fitting, it was on a launch monitor and they had the full club carts for Callaway, Nike and Titleist. I probably hit about 15-18 different clubs between the different combinations. The cost was only $29.99. They do a full fitting for $75 I believe (that's all clubs). I ended up buying one of the clubs I tested and they did not refund my $30, but I know some places do that.
Driver: SQ DYMO STR8-Fit
4 Wood: SQ DYMO
2H (17*), 4H (23*) & 5H (26*): Fli-Hi CLK
Irons (5-6): MX-900; (7-PW): MP-60
Wedges (51/6*): MP-T Chrome; (56/13): MP-R ChromePutter: White Hot XG 2-Ball CSPreferred Ball: e5+/e7+/B330-RXGPS Unit: NEOPush Cart: 2.0
Link to comment
Share on other sites


I was just fitted at my local course for a new driver, had the irons and hybrids done this winter. The irons are amazing, so much easier to use. Im almost 6'5", so i was reaching a lot with my shoulders to hit the ball with my irons. This cured that, and gave me much better yardage.

In the Ogio Kingpin bag:

Titleist 913 D2 9.5* w/ UST Mamiya ATTAS 3 80 w/ Harrison Shotmaker & Billy Bobs afternarket Hosel Adaptor (get this if you don't have it for your 913)
Wilson Staff Ci-11 4-GW (4I is out of the bag for a hybrid, PW and up were replaced by Edel Wedges)
TaylorMade RBZ 5 & 3 Fairway Woods

Cobra Baffler T-Rail 3 & 4 Hybrids

Edel Forged 48, 52, 56, 60, and 64* wedges (different wedges for different courses)

Seemore Si-4 Black Nickel Putter

Link to comment
Share on other sites


  • 1 year later...

Since my question relates to driver fitting I dug up this old thread.

Do you know when you have a driver fitting if there is a way they can tell what length driver you need?

When I got fit for my new irons this week, they placed a sticker over the face of the club and we worked in 1/4" increments to figure out that my irons needed to be 3/4" shorter.  Was curious if they fit a driver in the same manner.  I tend to always play a driver that is 1" shorter and wonder if this is the correct length for me.

Driver: Ping G25

3w - Ping K15

3h - TEE Trilogy

4h - TEE Trilogy

5h - TEE Trilogy

Irons: Ping G25 6-LW

Putter: Odyssey White Ice D.A.R.T
Bag: Nike SQ Tour

Optics: Bushnell Tour V2 Slope

Shoes: True Linkswear

Link to comment
Share on other sites


to answer my question above, I stopped in GG yesterday and they said they fit drivers for length the same way as irons.  So I'll probably look at getting something off the used rack and have it fitted to my specs.

Driver: Ping G25

3w - Ping K15

3h - TEE Trilogy

4h - TEE Trilogy

5h - TEE Trilogy

Irons: Ping G25 6-LW

Putter: Odyssey White Ice D.A.R.T
Bag: Nike SQ Tour

Optics: Bushnell Tour V2 Slope

Shoes: True Linkswear

Link to comment
Share on other sites


Note: This thread is 4855 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • I was pondering a repeatable golf swing beings I am a beginner, and a lot of things have presented themselves in bad ways.  I am mainly speaking irons here.  The thing about golf is the ball is still, but the golfer is also standing over the ball.  Are we saying that each time I hit the ball, my spine angle, lead arm, trail arm, wrists, etc. have to be just about exact to have a repeatable golf swing?  This is already a "funky" position to be in, and a "funky" move to make.  The golf swing is more of a body swing (in my mind).  The ball is small and the sweet spot is small.  I just feel defeated in the fact that I need to bend over the ball the same way every time, same knee bend, same swing arc, and hit a small ball with a small sweet spot.  When I watch club fittings on YouTube, these guys are swinging about the same speed within 1 mph or so. Their Trackman numbers are pretty identical even in 10-20 swings.  I am just trying to make sure that this is the main summary of what needs to be done.  As a beginner, how did you all think through the process to make the swing repeatable?  Much appreciated.
    • I kind of figured that might be part of the problem. I’m still guilty of it myself at times and you’re a better ballstriker than I am. I imagine the temptation to go for the flag grows as you get more control over your wedges. Might want to think about shot selection, too. I don’t know how you typically play short game shots but I see a lot of people default to hitting high pitch shots from basically everywhere, to every hole location, without regard for how the green is contoured and how the ball might release depending on where it lands. I know my short game has been steadily improving from expanding my shot selection, overall. Though to be honest, part of that is from necessity because I was really struggling with pitch shots so I started hitting more chips from everywhere, but it taught me a lot more about how to play short game shots in general. NP man. We’re all learning and improving together. It is a really good tool.
    • 2 rounds this weekend, one at my home course and another course that I know well.   Played well for 3 of the 4 nines.    Ended up with an 80 and an 88.  Breaking it down by 9, it was 38, 42, 41, and a tough 47 where I somehow ended up with chipping/pitching shanks where I dropped at least 6 strokes on the last 6 holes.
    • Yikes, how time flies. Here we are, almost ten years later. After prioritizing family life and other things for a long time, I'm finally ready to play more golf. Grip: I came across some topics on grip and think my grip has been a bit too palmy, especially the left hand. I'm trying to get it more in the fingers and less diagonal. Setup: After a few weeks of playing, this realization came today after watching one of Erik's Covid videos. I've been standing too far from the ball, and that messes up so much. Moved closer on a short practice session and six holes today, and it felt great. It also felt familiar, so I've been there before. I went from chunking the bejesus out the wedges to much better contact. I love changes that involves no moving parts. Just a small correction on the setup and I'm hitting it better and is better suited for working on changes. I'm a few years late, but the Covid series has been very useful to get small details sorted. I've also had to revise ball position. The goal now is back of ball in the middle of the stance as the farthest back with wedges, and progressively moving forward the longer the clubs get. Haven't hit the driver yet, but inside left foot or at the toe I suppose. Full swing: It's not terrible. I noticed my hands were too low, so got that to work on. Weight forward. More of the same stuff from earlier days. Swing path is now out-in and I want the push-draw back. When I get some videos it'll be easier to tell. I've also had this idea that my tempo or flow/rhythm could improve. It's always felt rushed around the end of the backswing into the transition, where things don't line up as they should. A short pause as things settle before starting the downswing. Some lessons might be in order. Chipping and pitching: A 12-hole round this week demonstrated a severe need to practice, but also to figure out what the heck I’m trying to do. I stood over the ball with no idea of what I wanted to achieve. On a four meter chip! I was trying the locked wrists technique, which did not work at all. As usual when I need information, I look for something Erik has posted. I’ve seen the Quickie Pitching Video before, but if I got it back then, I’ve forgotten. After reviewing that topic, some other topic about chipping and most importantly, the videos on chip/pitch from his Covid series, I felt like I understood the concept. I love the idea of separating those two by what you are trying to achieve, not by distance or ball flight. With one method you use the leading edge to hit the ball first. With the other, you use the sole to slide it under the ball. I was surprised he said that he went for the pitch 90% of the time while playing. I’ve always been scared of that shot and been thinking I have to hit the ball first. Trying to slide the club under usually ended with a chunked or skulled shot. After practicing in the yard the last days I get it, and see why the pitching motion is more forgiving. It’s astounding how easy the concept and motion is. Kudos to Erik, David and anyone else involved for being an excellent students of the game and teachers. With those two videos, my short game improved leaps and bounds, without even practicing. Just getting the setup right and knowing what motions you are trying to do is a big part of improving. Soft hands and floaty swings feels so much better than a rigid “hinge and hold”, trying to fight gravity and momentum by squeezing the life out of the grip. At least how I took to understand the “hold” part. I also think the chipping motion will help in the full swing. Keeping pressure on the trigger finger to ensure the hands are leading the clubhead and not throwing it at the ball. I've also tried looking in front of the ball at times when chipping, which helps. That's something I've been doing on full swings for a long time, and can make a big difference on the ball flight. Question @iacas: You say in the videos that you want the ball somewhere near the middle of your stance, and that for pitching it's the same. On the videos you got a fairly narrow stance, where inside of the left foot is almost middle of the stance, but the ball looks more inside the left foot than middle of the stance. Is that caused by the filming angle or is the ball more towards the inside of the foot? I often hit chips and pitches from uphill and downhill lies, where a narrow stance would have me fall over. What is your thought process and setup for those shots? The lowpoint follows the upper body, around left armpit IIRC, so a ball position relative to the feet may not be in the same spot relative to the upper body with a wider stance. Practice: I've set up my nets at an indoors location where I can practice at home. I did a quick search on launch monitors (LM), but haven't decided on anything yet. We're probably buying a house in this area in the near future, so I may hold off a purchase until I see what I can get going there. At some point I'd love to get a proper setup with a LM that can be used as a simulator. Outdoors golf is not an option 4-6 months a year here, so having an indoors option would be great. That would also be a place to use the longer clubs. My nearest course is a shorter six hole course where I don't use anything longer than a 21º utility iron. To play longer 18 hole courses I have to drive 1-1.5 hours each way, which I will do now and then, but not regularly. The LM market has changed a lot since Trackman arrived, and more people are buying them for personal use, but it's still need to spend a lot of money for a decent one that can fi. track club path. The Mevo at £305 could perhaps be something to consider. Maybe they have lowered the price to get out units before a new model is launched? It is almost six years old, though perhaps modified since then. It's got limited data and obviously isn't an option as a simulator, but could provide some data when hitting into a net. I'd have to read more about it first. It has to be good enough to be useful for indoors practice. As long as I frequently hit balls on the range or course, I'll get feedback on any changes there.
    • I'm pretty good at picking targets with mid/long irons in hand, but yes lately I have been getting more aggressive than I should be, especially from 100-150. The 50-100 deficiency is mainly distance control, working on that mechanically with Evolvr, but the 100-150 is definitely a result of poor targets.  6,7,8 iron in my hand I have no problem aiming away from trouble/the flag, hitting a very committed shot to my target, but give me PW, GW, and some reason I think I need to go right at it (even though I know I shouldn't). Like here from my last round. 175 left on a short par 5 to a back right flag. Water short right and bunker long. Perfectly fine lie in sparse rough, between the jumper and downwind playing for about 10yds of help. I knew to not aim at the flag here, aimed 40 feet left of it, hit my 165 shot exactly where I was looking, easy 2 putt birdie.   But then there's this one. I had 120 left from the fairway to a semi-tucked front left flag. Not a ton of trouble around the green but the left and back rough does fall off steeper than short/right rough. For some reason I aimed right at this flag with my 120yd shot, hit it the exact proper distance but pulled it 5yds left and had a tough short sided chip. Did all I could to chip it to 8 feet and missed the putt for a bad bogey. Had I aimed directly at the middle of the green maybe 5yds right of the flag, a perfectly straight shot leaves me 20 feet tops for birdie and that same pulled shot that I hit would have left me very close to the hole.    So yeah I think the 50-100 is distance control and the 100-150 is absolutely picking better targets. I have good feels and am strong with distance control on those I just need to allow for a bigger dispersion.    This view is helpful. For the Under 25yds my proximity is almost double from the rough vs the fairway which reinforces that biggest weakness right now being inside 25yds from the rough. But then interestingly enough in the 25-50yds I'm almost equal proximity from fairway and rough, so it looks like I need to work on under 25yds from the rough and then 25-50 from the fairway. The bunker categories are only 1 attempt each so not worried about those.   Thanks as always for the insight, it's been helpful. I'm really liking ShotScope so far.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...