Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6084 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Well recently, I tried a new technique that I came up with which is where you have the club angled back for a flop, but when you take it back, you don't break your wrists and I seem to get more consistent contact. It's a weird feeling, but it works. It only works if you really use your core on chips (thanks to stan utley). Anyways, I'm wondering if anyone else has tried this or if this is actually a real kind of shot. Thanks

Posted
club is angled backwards, not forwards?

In My Hunter Bag:

SQ Sumo2 5900 Driver 10.5
SQ Sumo2 3w 15
A3OS 4 Hybrid 4-PW x20 Uniflex Steel Tom Watson Chrome 52, 56, 60 Sudio Stainless Laguna 2.5 Raw Distance TitaniumGo Bears


Posted
I never cock my wrists for chip shots. For pitches I do a little bit. For flop shots I do alot.

 - Joel

TM M3 10.5 | TM M3 17 | Adams A12 3-4 hybrid | Mizuno JPX 919 Tour 5-PW

Vokey 50/54/60 | Odyssey Stroke Lab 7s | Bridgestone Tour B XS

Home Courses - Willow Run & Bakker Crossing

 

Awards, Achievements, and Accolades

Posted
Interesting.....I may give this a try next time on the practice range.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
pm doesn't i don't cock my wrist on flop's but on some chip's and pitch's i do

driver. taylormade tour burner tp ust avixcore tour green 75 x
3 wood 909 f3 13* voodo xnv8
3 hybrid adams idea pro vs proto 95x
irons 3 no 4 5-pw nike cci forged blades
gap wedge nike sv tour blacksand wedge cg14 56* 14flopadopolous vokey spin milled 64 7putter scotty cameron classics newport...


Posted
Try putting the ball way back in your stance, then hit the flop. It may not go as high, but it will spin like a SOB.

My swing thoughts:

- Negative thinking hurts more than negative swinging.
- I let my swing balance me.
- Full extension back and through to the target. - I swing under not around my body. - My club must not twist in my swing. - Keep a soft left knee


Posted
I have practice the full shot flop shot with my 60 degree wedge and have same par three times at different occasions, however, I do hinge my wrist with a wide open club face.

Titleist 910 D2 9.5 Driver
Titleist 910 F15 & 21 degree fairway wood
Titleist 910 hybrid 24 degree
Mizuno Mp33 5 - PW
52/1056/1160/5

"Yonex ADX Blade putter, odyssey two ball blade putter, both  33"

ProV-1


Posted
I do both - but i have to say that without wrist it makes the shot easier imo and i get better consistancy with it.

Burner 9°
FW Burner 15°
Burner Rescue 19°
MP67 4-PW
CG10 50° CG12 DSG 54° & 60°


Posted
I have looked at slow motion video of multiple tour players and here is what I see.

They get set at the top, right wrist bent back, left wrist flat, club inline with the target. This relationship of the right arm to the left arm to the body at the top is key.

Now just pivot around spine to the target maintaining the same relationship as at the top until the club is parallel to the ground . This very difficult move is the key reason why tour players are so different from the rest of us. They can maintain that configuration of arms and body while keeping their head and posture steady.

If you perform this move correctly you will be surpised to find that your hips are 30% open to the target line at impact, just like tour players.

Posted
i can do it both ways but i find i hit a lot less miss hits with flat wrist i will give you guys something in saying you do get a bit more spin when you cock your wrist's

driver. taylormade tour burner tp ust avixcore tour green 75 x
3 wood 909 f3 13* voodo xnv8
3 hybrid adams idea pro vs proto 95x
irons 3 no 4 5-pw nike cci forged blades
gap wedge nike sv tour blacksand wedge cg14 56* 14flopadopolous vokey spin milled 64 7putter scotty cameron classics newport...


Posted
Also, what you can do is don't hinge your wrists but when you go to impact, you can flip them through.
This works really well.

Note: This thread is 6084 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 34 (14 Dec 25) - Got outside for a few moments to work on bump and runs with the 4h (again using the exaggerated weight shift reminder of the left (lead) heel). Finding that it helps keep the downswing arc extended.  
    • Wordle 1,639 4/6 🟩⬜⬜⬜⬜ 🟩⬜🟨🟨⬜ 🟩⬜🟩🟩⬜ 🟩🟩🟩🟩🟩
    • You can try it with some lead tape first to see if it works for you.
    • Wordle 1,639 5/6 🟨⬜⬜⬜⬜ 🟨⬜🟩🟨⬜ 🟩🟨🟩⬜⬜ 🟩⬜🟩🟩🟩 🟩🟩🟩🟩🟩
    • I am currently playing a Cobra Ltdx LS 9 degree driver and Cobra Ltdx LS FW3. Both with Tensei White stock stiff shafts and original weights of 12g (heel) and 3g (toe). My miss is usually a pull fade or sometimes a slice, swing is out to in. Driver swing speed about 112 mph. Grips are stock regular. Intended change: Driver: Switching to Tensei White x-flex one inch shorter which I suppose would be 44,5? Changing heel weight to 18g. Changing grip to Golf Pride Z-grip cord midsize. Change hosel setting to standard draw. FW3: Changing heel weight to 16g (apparently not available in FW weights, but supposed to be something called "internal weight" a club builder can add which fits between the weight and the screw?). Change grip to Golf Pride Z-grip cord midsize. Changing hosel setting to standard +1. The goal is to 1) get better grip since I tend so lose grip in warm and moist conditions with the current grips and 2) mitigate the misses to start more straight with less side spin. Also considering adding the Cobra Ltdx LS FW5 instead of my old Taylormade R9 and getting 14g heel and 6g toe weights with the same grip as the others and hosel setting standard +1.   All of the above is based on conversations with ChatGPT and, as everyone knows, it can come up with pretty much whatever but I spent a few hours asking about different perspectives etc and this was the recommendation. So, my question is basically, does it make any sense?   Thanks.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.