Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5963 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
First off, some bad news for me. Playing a round the other day, my driver head broke off during a normal swing. I don't really know what happened, and needless to say, I was very disappointed. But I have had the driver about 2 years so, I got a lot out of it.

But for my question, since the driver is broke, I was wondering how much I stand to gain by upgrading to new technology. I figure I can reshaft my current driver for about 70-100 dollars, depending on the shaft I choose. I noticed that I can get a Callaway Hyper X tour with NV65 Shaft for $200 right now on tgw.com. My swing speed is ~105, and I get about 280-290 in distance including roll. I guess, putting it differently, am I pretty much maxed out distance wise with my current swing speed?

In my bag:

DRIVER: 905T w/ Fujikura E360 Shaft
3 Wood 906 F4 w/ Aldila Proto "By You"
Irons: MP 30 w/ Rifle 5.5 Wedges Oil Can 50*, Vokey SM 54* and 58*Putter: C-06


Posted
If you are happy with that driver, than get another shaft. Costs less than a new club. And yes, I'd say 280-290 is max for that speed, you must be making solid contact almost every time to get that kind of distance at that swing speed.

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


Posted
go to the golf store with a launch monitor and check out the new driver and see what give you the best results, if they have your current driver in the use club bin that you can test compare the new club with, all the better.

Titleist 910 D2 9.5 Driver
Titleist 910 F15 & 21 degree fairway wood
Titleist 910 hybrid 24 degree
Mizuno Mp33 5 - PW
52/1056/1160/5

"Yonex ADX Blade putter, odyssey two ball blade putter, both  33"

ProV-1


Posted

There's absolutely nothing wrong with your golf game that can't be cured by your checkbook!

In David's bag....

Driver: Titleist 910 D-3;  9.5* Diamana Kai'li
3-Wood: Titleist 910F;  15* Diamana Kai'li
Hybrids: Titleist 910H 19* and 21* Diamana Kai'li
Irons: Titleist 695cb 5-Pw

Wedges: Scratch 51-11 TNC grind, Vokey SM-5's;  56-14 F grind and 60-11 K grind
Putter: Scotty Cameron Kombi S
Ball: ProV1

Awards, Achievements, and Accolades

Posted
Unless you can get some significant benefit from a new driver, take mhodar13's tip and go with a reshaft.

I play the HyperX Tour driver, and really like it. But, Titleist makes excellent drivers too.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted
If you are happy with that driver, than get another shaft. Costs less than a new club. And yes, I'd say 280-290 is max for that speed, you must be making solid contact almost every time to get that kind of distance at that swing speed.

That is some serious distance for that swing speed.....OMG. I would try to mate up with the same type shaft you had. I don't see how you are going to improve upon these stats.

909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
someone gets 30 35 yards of roll

driver. taylormade tour burner tp ust avixcore tour green 75 x
3 wood 909 f3 13* voodo xnv8
3 hybrid adams idea pro vs proto 95x
irons 3 no 4 5-pw nike cci forged blades
gap wedge nike sv tour blacksand wedge cg14 56* 14flopadopolous vokey spin milled 64 7putter scotty cameron classics newport...


Posted
If you are happy with that driver, than get another shaft. Costs less than a new club. And yes, I'd say 280-290 is max for that speed, you must be making solid contact almost every time to get that kind of distance at that swing speed.

I ended up getting a new shaft put in it. Unfortunately, they didn't have the Grafalloy Blue shaft, so I ended up getting a Fujikura E360 put in it. The person doing it said they are very similar, and that they Fuji should bring my ballflight down just a touch, which is something I've been looking to do.

I do it the ball consistently on the sweetspot. The 280-290 was not found by stepping off a drive or anything like that. A course I play has a straight-away, flat 430 yard par 4. I normally have between 130 and 160 left for my second shot, depending on wind. Not very scientific, but gets the job done.

In my bag:

DRIVER: 905T w/ Fujikura E360 Shaft
3 Wood 906 F4 w/ Aldila Proto "By You"
Irons: MP 30 w/ Rifle 5.5 Wedges Oil Can 50*, Vokey SM 54* and 58*Putter: C-06


Posted
you can get the Hyper X Tour WAY cheaper than $200 here

...and for the record, I bought a driver in "very good" condition and it looked as though it had NEVER been hit.

I would consider buying a new one just because it's nice getting new clubs, but only if I hit it as well or better than the old driver. As far as gaining anything... new drivers aren't any longer than 2 yrs ago or anything. And direction/performance are personal, might be better, might not.

EDIT: guess I'm too late
My Clubs: Callaway FT-i Tour LCG 9.5° w/ Matrix Ozik Xcon 6 stiff; Sonartec GS Tour 14° w/ Graphite Design Red Ice 70 stiff; Adams Idea Pro 2h(18°) & 3h(20°) w/ Aldila VS Proto 80 stiff; Adams Idea Pro Forged 4-PW w/ TT Black Gold stiff; Cleveland CG12 DSG RTG 52°-10° & 58°-10°; Odyssey...

Note: This thread is 5963 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 22 - 2026-01-11 More mirror work. Back outdoors tomorrow.
    • Day 11, 1/11/26.  Today was putting, along about 6' of carpet, with coins on the ground to keep me cognizant of what I'm doing.  I think this is the at-home drill from LSW. (Ugh, missed two of the last four days -- 1/10 and 1/8)
    • Day 9: 2026.01.11 Hit some balls at the range, concentrating on weight distribution at address, got some on film.
    • Day 468 - 2026-01-11 Loooooong day. Did some work in the patio door (as a mirror) when I got home.
    • I caught a video on this driver; the face tech seems crazy. Looking at the heat map for ball speed, hitting it basically anywhere on the face only loses a few percent ball speed. The surprising and counter intuitive part to me was that for flat faced clubs, ball speed loss is directly proportional to distance loss. For clubs with bulge and roll this is apparently not true. The surprising part of that story being that the max distance potential looks to be a tiny pee sized area for this driver, and I feel in general for drivers. The counter intuitive part being (the myth?) that blade irons have a pee sized sweet spot and missing that tiny spot causes dramatic losses. And that modern drivers, maybe 2017 on, have massive sweet spots and are ultra forgiving. Where in reality, if this heat map data is valid and reliable, it might be a bit of the opposite. This insane tech driver appears to have a pea sized "sweet spot" while Mizuno Pro 241 irons are 28% more forgiving compared to the average of all clubs measured. Not compared to other players irons, compared to all clubs from all categories, players to SGI! The Pro 241 being essentially just a solid chunk of metal with no "tech" at all. Which for me devolves into a whole mess of what is forgiveness really? And in measurable and quantifiable results how many yards, or feet, does that translate into?  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.