Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4537 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I use 56* 58* and 60* wedges. I noticed I have a large gap in distances between my PW 135 yds and my 56* 90-100yds. Is this yardage gap necessary to fill? I rarely find myself at that distance, but I am <100yds a lot


PW* 120-135yds
56* 90-100 yds
58* 70-80 yds
60* 40-60 yds

Any thoughts

G10 (VS Proto 65 X) or 905S (speeder X) / X Tour 3W (VS Proto S) / Adams Idea Tour Proto 18* (VS Proto S) / S59 Tour, Z-Z65 Cushin (D2) / Mizuno MP-T 51-06 , 56-10, / Miz TP Mills #6 ~or~ Cleveland BRZ #5
 
 
85,84,85,84


Posted
yes 52 degree gap wedge. Sell your 58 though, no need to have 5 wedges

Sasquatch 460 10.5
X 3 wood
X 4H
X-22's 5-PW
X Forged 52, 58 Black Series #1 Tour i X Series stand bag


Posted
Id suggest adding a 52* and removing the 60*. IMO, there is no reason to carry both a 58* and 60*.

Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S


Posted
Id add a 52* and remove the 60*. There is no reason to carry both a 58* and 60*.

Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S


Posted
I'm the same,add a 52* and get rid of the 58.

aeroburner tp 10.5 stiff
superfast tp 2.0 3 wood stiff
Halo 25 and taylormade tp 19 degree hybrids
miura cb 202 and wedge
tp 52* wedge, tp 56* taylormade spider mallet putter


Posted
I use 56* 58* and 60* wedges. I noticed I have a large gap in distances between my PW 135 yds and my 56* 90-100yds. Is this yardage gap necessary to fill? I rarely find myself at that distance, but I am <100yds a lot

Personally, I'd store the Eye2 56* and the 60* in the garage or basement for future pondering.

I'd keep the Cleveland classics 58* and add a similar style of gap/sand wedge (like a 52* Cleveland or vokey). The Ping sand wedge is one of the fugliest irons I've ever seen. But hey, maybe that's just me.

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Posted
You could do something like 50*, 54*, and keep the 58

In my X-Series Bag:

Driver G10 10.5*
Woods V-Steel 3W, 5W
Hybrids Pinemeadow ZR1 19* 3HIrons MX-19 4-GWWedge MP-R Black Nickel 54/10Putter Rossa Sebring AGSI+


Posted
It does look like your lofts are compressed.


I like having them spaced out to allow more full or 3/4 shots that fill the yardage gaps nicely.

I have finally settled down with my current set and am very pleased with the results.

PW46.0°11.0°
UW50.0°12.0°
SW54.0°13.0°
LW58.0°14.0°
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
Personally, I'd store the Eye2 56* and the 60* in the garage or basement for future pondering.

The only reason I carry the eye 2 SW is: I love this club, I only hit it out of the sand, and I am really good with it. I am not married to the 60*, but I did just buy the 58*. I like the 58, so Ill try to open it up a little and practice my 60yds in shots with it. Im thinking of a 52*, keeping my 56* and 58*. Any thoughts on this?

G10 (VS Proto 65 X) or 905S (speeder X) / X Tour 3W (VS Proto S) / Adams Idea Tour Proto 18* (VS Proto S) / S59 Tour, Z-Z65 Cushin (D2) / Mizuno MP-T 51-06 , 56-10, / Miz TP Mills #6 ~or~ Cleveland BRZ #5
 
 
85,84,85,84


Posted
52, 56 and 58 is a good combo.... You'll be happy with that...

In my Ogio Blade Stand Bag:
 

TaylorMade Burner 10.5*

Adams Insight BUL 15*
Taylormade RBZ 3H

TaylorMade RBZ 4-AW

Vokey SM4 54-11

Cleveland CG14 58 2 dot wedge

Ping Karsten Series Craz-E putter

Top Flite Gamer


Posted
The only reason I carry the eye 2 SW is: I love this club, I only hit it out of the sand, and I am really good with it.

Should work just fine. I usually carry a 52* and a 58*, but sometimes I add a dedicated 56* SW. Even with only 2* difference the 56* and 58* are very different clubs with different uses.


Posted
I had a big gap between PW and SW as well, so since I had a 5 wood, I got a set of irons that was 4-AW (approach wedge, same as gap wedge) instead of 3-PW, and it's working out great. Did that to fill the gap and also leave a slot open for a LW, which I'm hopefully getting in a few days. I love the AW, it is my go-to club from 140 yards.

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


Posted
I prefer using 4 wedges. Currently using a 46* PW, 50* AW, 54* SW, and a 58* LW.

Gives me a lot of full swing yardages, and options around the greens. If I played a course where my strategy needed another wood or iron, I'd probably ditch the AW.

In my bag

Driver: J33r 10.5º - Grafalloy ProLaunch Blue
Fairway: 600T 5w, 7w
Irons: Golfsmith Tour Cavity 4-PW/AW/SW/LWPutter: Victoria IIBall: B330-RXGlove: WetherSofShoes: DryJoys


Posted
Sorry for switching gears a bit, but with wedges... I also like to keep consistency with the shafts, and grips. My wedges should be the same shaft as my iron set... Project X, KBS, DG, whatever. It's a good idea to have consistent grip type and size throughout the set and wedges. Lastly, the shaft lengths should be stepped down in length in equal increments from 3-LW.

Most people get wedges ala carte and don't put enough thought to fit and consistency.

Driver= Titleist 909D3 9.5 deg
3 Wood= Titleist 909F3 15 deg
Hybrid= Adams Idea Pro Black 19 deg
Irons 3-P= Titleist 695 CB
Wedges= Titleist Vokey Spin Mill 54/10, 60/4Putter= Titleist Scotty Cameron Newport 1.5Ball= Titleist ProV1x, NXT Tour


Posted
My AP1 PW is 45* and my W is 50*. I'm thinking about buying a 52* Vokey and that will give me 45* 50* 52* and 56*.
I'll take out my 60*


  DLX cart bag...white/red

  R1
913F 15*

 913H 19*

 G25s 4 iron - U wedge

 CG 14 Black Pearl 56* -  60*

... KOMBI 35" 

...ProV1

.

.

.


Posted
My AP1 PW is 45* and my W is 50*. I'm thinking about buying a 52* Vokey and that will give me 45* 50* 52* and 56*.

Having a 54* and a 58-60* make the most sense. Wow, did not realize how strong the lofts are in the AP1's.

Driver= Titleist 909D3 9.5 deg
3 Wood= Titleist 909F3 15 deg
Hybrid= Adams Idea Pro Black 19 deg
Irons 3-P= Titleist 695 CB
Wedges= Titleist Vokey Spin Mill 54/10, 60/4Putter= Titleist Scotty Cameron Newport 1.5Ball= Titleist ProV1x, NXT Tour


Posted
if you want to keep the 58 get it bent to 60 then get a 52 and keep the sw

In My Sun Mountain 3.5 Bag:
Driver- '07 Burner 10.5
3 Wood- Sumo 3 wood
Hybrid- 3+ 18.5 hybrid
Irons- R7 4-AW steelWedges- 56 Putter- Itsy Bitsy SpiderBalls- D2 Feel Prov1 Practice


Posted
if you want to keep the 58 get it bent to 60 then get a 52 and keep the sw

Be careful. When you alter loft, you're going to change the bounce.

Driver= Titleist 909D3 9.5 deg
3 Wood= Titleist 909F3 15 deg
Hybrid= Adams Idea Pro Black 19 deg
Irons 3-P= Titleist 695 CB
Wedges= Titleist Vokey Spin Mill 54/10, 60/4Putter= Titleist Scotty Cameron Newport 1.5Ball= Titleist ProV1x, NXT Tour


Note: This thread is 4537 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 470 - 2026-01-13 Got some work in while some players were using the sim, so I had to stick around. 🙂 Good thing too, since… I hadn't yet practiced today until about 6:45 tonight. 😛 
    • That's not quite the same thing as what some people messaged me today.
    • Day 152 1-12 More reps bowing wrists in downswing. Still pausing at the top. Making sure to get to lead side and getting the ball to go left. Slow progress is better than no progress.  
    • Yea, if I were to make a post arguing against the heat map concept, citing some recent robot testing would be my first point. The heat map concept is what I find interesting, more on that below. The robot testing I have looked at, including the one you linked, do discreet point testing then provide that discrete data in various forms. Which as you said is old as the hills, if you know of any other heat map concept type testing, I would be interested in links to that though! No, and I did say in my first post "if this heat map data is valid and reliable" meaning I have my reservations as well. Heck beyond reservations. I have some fairly strong suspicions there are flaws. But all I have are hunches and guesses, if anyone has data to share, I would be interested to see it.  My background is I quit golfing about 9 years ago and have been toying with the idea of returning. So far that has been limited to a dozen range sessions in late Summer through Fall when the range closed. Then primarily hitting foam balls indoors using a swing speed monitor as feedback. Between the range closing and the snow flying I did buy an R10 and hit a few balls into a backyard net. The heat map concept is a graphical representation of efficiency (smash factor) loss mapped onto the face of the club. As I understand it to make the representation agnostic to swing speed or other golfer specific swing characteristics. It is more a graphical tool not a data tool. The areas are labeled numerically in discrete 1% increments while the raw data is changing at ~0.0017%/mm and these changes are represented as subtle changes in color across those discrete areas. The only data we care about in terms of the heat map is the 1.3 to 1.24 SF loss and where was the strike location on the face - 16mm heal and 5mm low. From the video the SF loss is 4.6% looking up 16mm heal and 5mm low on the heat map it is on the edge of where the map changes from 3% loss to 4%. For that data point in the video, 16mm heal, 5mm low, 71.3 mph swing speed (reference was 71.4 mph), the distance loss was 7.2% or 9 yards, 125 reference distance down to 116. However, distance loss is not part of a heat map discussion. Distance loss will be specific to the golfers swing characteristics not the club. What I was trying to convey was that I do not have enough information to determine good or bad. Are the two systems referencing strike location the same? How accurate are the two systems in measuring even if they are referencing from the same location? What variation might have been introduced by the club delivery on the shot I picked vs the reference set of shots? However, based on the data I do have and making some assumptions and guesses the results seem ok, within reason, a good place to start from and possibly refine. I do not see what is wrong with 70mph 7 iron, although that is one of my other areas of questioning. The title of the video has slow swing speed in all caps, and it seems like the videos I watch define 7i slow, medium, and fast as 70, 80, and 90. The whole question of mid iron swing speed and the implications for a players game and equipment choices is of interest to me as (according to my swing speed meter) over my ~decade break I lost 30mph swing speed on mine.
    • Maxfli, Maltby, Golfworks, all under the Dicks/Golf Galaxy umbrella... it's all a bit confounding. Looking at the pictures, they all look very, very similar in their design. I suspect they're the same club, manufactured in the same factory in China, just with different badging.  The whacky pricing structure has soured me, so I'll just cool my heels a bit. The new Mizuno's will be available to test very soon. I'm in no rush.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.