Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5447 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I just saw on another thread the bunkerbobby created his own combo set as follows:

5i,6i - Mizuno MP 53

7i, 8i - Mizuno MP 63

9i, pw - Mizuno MP 68

I am intrigued and have been considering putting together my own Miz combo  of MP 53 (4i,5i) and MP 63 (6i - PW).

Now I am interested in hitting the MP 68 (9i,PW) as well to see if they should be included.

What are the downsides to make your own combos????

* will they feel too different?

* how will they be for resale in a couple of years when the latest / greatest are out?

Driver : ping.gifG15 10.5* Serrano Stiff
3W: callaway.gif RAZR 15*
Hybrids : adams.gif A7 19*
4- PW : mizuno.gif MP - 63
Wedges : vokey.gif50*, 54*, 60*Putter: cameron.gif Scotty Newport 2.5Bag: sunmountain.gif 2011 SunMountain C-130


Posted

Feel shouldn't be a huge issue. They will feel a little different, but I would doubt it would be enough to throw you off.  Even with a matched set the feel will be a little different between the 4I and 9I, simply because it is easier to hit the 9I.  Unless you can hit every club dead center each time.

I don't think resale will matter much after a couple of years.  It may actually be an easy sell since most golfer don't know that you can combine styles and doing so is becoming more popular.

The one big thing to look out for are the loft gaps.  I don't know what each loft is on each set, but you don't want to run into a big gap.  i.e. you don't want real small gap between two clubs, then a big gap somewhere else.  If you were to get them ordered special, it should be pretty easy to request certain clubs be bent to accommodate what you are trying to do, especially if they come directly from Mizuno.

I will judge my rounds much more by the quality of my best shots than the acceptability of my worse ones.


Posted

If you have a mixed set with 53s and 63s your loft gaps will line up, but if you put in 68s your loft gaps will change.  The 53/63 design is stronger than the 68 design from 6i - PW.

It's probably immaterial, but I figured you should know.


Posted

as mentioned above, check the loft, lie angles of each set you are combo'ing (keep them close or have them adjusted slightly)

for me they have to blend seamlessly

i dont want my 7i to look a lot different than my 8i does etcc.

my current combo set was custom ordered and the lofts and lies were bent accordingly

they flow perfectly from 4i to LW

"My swing is homemade - but I have perfect flaws!" - Me

Posted

Yes, loft, lie angles, as well as feel and aesthetics come into play, but this wasn't a DIY combo.  I was custom fitted for this set.  Discussed at length with the fitter whether better to go with this combo (5i,6i - Mizuno MP 53; 7i, 8i - MP 63; 9i, pw - MP 68), or with 5i,6i, 7i - MP 63 and 8i, 9i, pw - MP 68.  The fitter liked the mix of 53s, 63s, and 68s best, based among other things on my 2 hours of Trackman data.  Wouldn't suggest that others necessarily mimic my particular set, but (so far) I feel I am getting the very best out of each model's design for my current game.

-- bb


Posted

If you're getting a combo set, you better love them, because good luck selling that mish mosh.

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Posted


Originally Posted by ronbo25

5i,6i - Mizuno MP 53

7i, 8i - Mizuno MP 63

9i, pw - Mizuno MP 68


This seems a bit ridiculous to me.  If a guys ball-striking isn't up to snuff to carry long irons to begin with, does he really need a muscleback in the short irons?  Seems more like an e-golfing fad.

In the Bag: TaylorMade R11 TP - TaylorMade R7 TP TS - Cleveland Halo - TM TP 2009 3-PW - Vokey SM 52 - Vokey SM 60 - Rife Barbados CS - ProV1x 


On the Computer:  Analyzr Pro 
 


Posted

Two things to remember: Will loft gaps be consistent, and is it worth the hassle.

Being that you have a 5 HDCP, you have some other options which are geared toward mix and match.

The Nike VR Pro Combo irons move from pocket cavity (long), to split cavity (medium), to muscleback (short) in the same set. You can also mix them with the Pro Cavity irons. Just saw them at a Golf Expo this weekend. Great clubs, but for someone who's a better player than me.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted

I have a combo set, my usual set consisting of Mizuno MP-52 3-4 irons and MP-33, 5-PW.  I have the MP 52 up to the 5 iron, and of course my MP-33 are a full set 2-PW.

If you can make sense of that, then you're better than me :) I can switch in and out as conditions and playing dictate. They are all loft/lie and swing weight matched. The feel between the set is very consistent the only thing being the ball flight is a little higher in the long irons, which in my opinion, is never a bad thing :)

Even Rory McIlroy used a combo set when he won at Quail Hollow, AP-2 and MB's. As for selling them, they seem to sell quite well on ebay, so I wouldn't worry about that too much.

Cheers, Allan

In my Ping Hoofer II bag: Titleist 975J | Callaway Big Bertha 3 Wood S2H2 | Mizuno Fli-Hi 18˚ Hybrid | Mizuno MP-33 3-PW | Cleveland Tour Action 900 54/60 | Ping Anser II BeCu | Titleist ProV1

My Playground: Northview G&CC


Posted

Depending on the exact make-up of your set it may be difficult to resell... it's just a matter of finding somebody who wants that kind of set.  As others have said, the thing to really watch out for is the lofts... You'll want to make sure that those match otherwise you might end up with some big yardage gaps...

Tristan Hilton

My Equipment: 
Titleist TSR2 Driver (Fujikura Pro 2.0 TS; 10.5°) · PXG 0211 FWs (Diamana S+ 60; 15° and 21°) · PXG 0211 Hybrid (MMT 80; 22°) · Edel SMS Irons (SteelFiber i95; 5-GW) · Edel SMS Pro Wedges (SteelFiber i110; 56°, 60°) · Edel Classic Blade Putter (32") · Maxfli Tour Ball · Pinned Prism Rangefinder · SuperStroke Grips · Flightscope Mevo · TRUE Linkswear Shoes · Vessel Player V Pro 

Awards, Achievements, and Accolades

Posted



Originally Posted by ronbo25

I just saw on another thread the bunkerbobby created his own combo set as follows:

5i,6i - Mizuno MP 53

7i, 8i - Mizuno MP 63

9i, pw - Mizuno MP 68

I am intrigued and have been considering putting together my own Miz combo  of MP 53 (4i,5i) and MP 63 (6i - PW).

Now I am interested in hitting the MP 68 (9i,PW) as well to see if they should be included.

What are the downsides to make your own combos????

* will they feel too different?

* how will they be for resale in a couple of years when the latest / greatest are out?


I have a combo set of MP 60's & 32's and really like them and I do notice a little differnce in feel between the 60's & 32's, but its not a big deal to me. As stated earlier in this thread, make sure the lofts are in the correct sequence. As for blades in the short irons, well if you can't hit a 8i mb then golf isn't for you. I say this b/c the more loft a club has the more forgiving it is and conversly the less the loft the more unforgiving the club is. Also most amatures are unable to hit anything below a 5i and that is 1 of the reasons hybrids have become so popular. You will notice that companies that sell combo sets will split at the 7i or the 8i. Some OEM's have combo sets, like the MacGregor 1025 V-foils. If you can hit the 62's good then the 68's shouldn't be that big of a stretch. Personally I now prefer my long irons, which for me are my 2,3 & 4 irons to be cb's cuz I am more consistent with them and can get a little more length out of them; but will put the mb's back in the bag when I'm play'n well cuz I think they are fun to play. Some ppl will put 3 different models in a set; I prefer to do just 2 modles, but that is just me. After you get the fundamentals down this sport becomes much more mental. As for resale it depends on the brand. If they are any of the big brands you won't have a problem selling them. Your Mizuno's shouldn't be a problem to sell. If they are KZG, for example, they will be less in cost than the name brands, just as good or sometimes better quality, but the resale valve is poor b/c they aren't name brand and thats all. Hope this helps some.


Note: This thread is 5447 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.