Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5406 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted


There isn't much innovation to be done with irons these days.  Just change the asthetics a bit and you have a brand new club!!

Originally Posted by 1par2win

Just listed on their web-site. Not much of a change by the looks of it from the 710 series.

http://www.titleist.com/teamtitleist/b/tourblog/archive/2011/06/26/prototype-titleist-712-irons-introduced-on-pga-tour.aspx




Posted

Not too thrilled with the looks of the AP1 & 2. The 712's look nice though.

Alan Olson

Follow The Sand Trap on Twitter!
Check out our Facebook page!

Awards, Achievements, and Accolades

Posted


Originally Posted by shades9323

There isn't much innovation to be done with irons these days.  Just change the asthetics a bit and you have a brand new club!!



Very true. I have had my eye on the 710CB's for a while now but was waiting until the "new" series came out. After the 712's are released and inventories are stocked I figure I'll save a little $$$ as opposed to buying the 710's now.


Posted

The 712 MBs look sharp!

A CB/MB combo set may seriously be considered....

Deryck Griffith

Titleist 910 D3: 9.5deg GD Tour AD DI7x | Nike Dymo 3W: 15deg, UST S-flex | Mizuno MP CLK Hybrid: 20deg, Project X Tour Issue 6.5, HC1 Shaft | Mizuno MP-57 4-PW, DG X100 Shaft, 1deg upright | Cleveland CG15 Wedges: 52, 56, 60deg | Scotty Cameron California Del Mar | TaylorMade Penta, TP Black LDP, Nike 20XI-X


Posted

Just purchased my 710's 2 months ago... GO ME!!! AWESOME!!!! I knew I should of waited :/

Driver: Titleist 910D2 9.5
Wood: Titleist 910Fd
Hybrid: Titleist 910H
Irons: Titleist AP1
Wedges: Titleist Vokey 56/11 60/7
Putter: Titleist Scotty Cameron Custom Shop Newport 2

 


Posted


Originally Posted by ZEUS

Just purchased my 710's 2 months ago... GO ME!!! AWESOME!!!! I knew I should of waited :/


Did you buy the 710, APs2?  If so, don't be discouraged because I think the 710 AP2s look better than the 712 AP2s.


Deryck Griffith

Titleist 910 D3: 9.5deg GD Tour AD DI7x | Nike Dymo 3W: 15deg, UST S-flex | Mizuno MP CLK Hybrid: 20deg, Project X Tour Issue 6.5, HC1 Shaft | Mizuno MP-57 4-PW, DG X100 Shaft, 1deg upright | Cleveland CG15 Wedges: 52, 56, 60deg | Scotty Cameron California Del Mar | TaylorMade Penta, TP Black LDP, Nike 20XI-X


Posted


Originally Posted by Deryck Griffith

Did you buy the 710, APs2?  If so, don't be discouraged because I think the 710 AP2s look better than the 712 AP2s.



I agree here.  I ordered the 710 AP2's about a month ago, and, after looking over the pictures of the 712's I like the looks of the 710's much better.

SQ Dymo 10.5°

 Idea Pro A12 3H 20°

 710 AP2 5-GW SM4 56/11 60/07

 White Hot Sabertooth


Posted

I like the looks of the 710s over the 712s for the AP1s and AP2s.  However, I'd imagine a price drop may be coming soon for the 710 series with the 712 series coming out soon.  That's the downside to having just bought 710s.

:tmade: SLDR 12* :ping: G20 4W :adams: Speedline Super S 4H :mizuno: JPX-825 Pro 4-G :tmade: ATV 56* & 60* :cameron: 2014 Select Newport or 1997 Teryllium 3 Newport


Posted

Just looked on the team titleist site. Not impressed! If the club technology hasn't changed much I would by the 710. The 712 looks like a razor or a taylor Made. Too loud for me!

Awards, Achievements, and Accolades

Posted

I personally hate everything about the AP2 line from the 710's and the 712's because of how they advertise it.  but on a lighter note, as usual titleist has created an unbeatable blade

|callaway.gif X460 Tour Fujikura Tour Platform 26.3 73g | taylormade.gif 2i Rescue 11 |  3i HiBore Hybrid |  710 MB |  Wedge Works 48/06 |  cg12 52/08  | vokey.gifSpin Milled 56/11 | nike.gifSV Tour 60/10 | cameron.gif Studio Select Newport 2 34" |

 

rangefinder : LR550


Posted

At first glance, based on these pics, I do like the cosmetic changes !  MB an CB are classical beauties and appear to have a satin-like finish, which I like.  AP1 and AP2 seem to have a bit more high quality appearance, never was fond of the rubbery insert thingy.


  • 2 weeks later...
Posted

The 712 MBs look sharp!

A CB/MB combo set may seriously be considered....

I agree. I really like the satin finish.

Yonex Ezone Type 380 | Tour Edge Exotics CB Pro | Miura 1957 Irons | Yururi Wedges | Scotty Cameron Super Rat | TaylorMade Penta


  • 2 weeks later...
Posted
I just saw a picture of the blades, and man do they look good! That muscle looks pretty much perfect.

In my bag:

Driver: Titleist TSi3 | 15º 3-Wood: Ping G410 | 17º 2-Hybrid: Ping G410 | 19º 3-Iron: TaylorMade GAPR Lo |4-PW Irons: Nike VR Pro Combo | 54º SW, 60º LW: Titleist Vokey SM8 | Putter: Odyssey Toulon Las Vegas H7

Awards, Achievements, and Accolades

Note: This thread is 5406 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
    • Day 56 (4 May 26) - Worked on some ball-then-ground drills - going from P3 thru impact - with a slowed tempo, working to keep all parts in sync.   
    • Wordle 1,780 3/6 🟩⬜🟨🟨🟨 ⬜⬜⬜⬜⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,780 4/6 🟨⬜⬜⬜🟨 ⬜🟨🟨🟨⬜ 🟩🟨🟩🟨⬜ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.