Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5031 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

0  

  1. 1. Taylormade R11 or Titleist 910 D2

    • 910 D2
      15
    • Taylormade R11
      7


Recommended Posts

Posted

Pros and cons of both.

I can't decide between the two.

Driver: Undecided..Someone help me decide
Fast 12 3 Wood 15* Stiff Shaft
A12 3 Hybrid 19* Stiff Shaft
CB Blade Irons (4-7) Dynamic Gold X-100 Shafts
MB Blade Irons (8-PW) Dynamic Gold X-100 Shafts
SM4 52* Oil Can Wedge - S300 Shaft
SM4 56* Oil Can Wedge - S300 Shaft
SM4 60* Oil Cal Wedge - Wedge Flex
2010 California Series - Monterey - 35'


Posted

Uh, have you actually hit them and tried out how they feel?  Looked at data?    Seems that would be the place to start.


Posted
I have the R11 TP and love it. I hit 71.4% of my fairways today and hit 53.4% on average. I attribute a lot of my latest success to my R11 as it is very forgiving. But I haven't hit the 910/D2 though... Food for thought... Also I read an article that Taylor Made is releasing a new driver in February, and they are saying it is 20+ yards longer than the R11. So you may want to wait until February to pull the trigger on a new driver.
  • Upvote 1

.

Awards, Achievements, and Accolades

Posted


Originally Posted by Clambake

Uh, have you actually hit them and tried out how they feel?  Looked at data?    Seems that would be the place to start.

This is exactly what you should do...

Back in July my entire set got stolen and after a bit of online shopping I thought I wanted the Titleist AP2s and an R11 driver.... went to GolfSmith and hit everything I could.... ended up with TaylorMade TP MC irons and a 910 D2 for my driver... The 910 (with the RIP shaft) gave me the best numbers so it is what I went with.  I suggest that you hit both, but if you want to go off of what I like, choose the 910.

  • Upvote 1

Tristan Hilton

My Equipment: 
Titleist TSR2 Driver (Fujikura Pro 2.0 TS; 10.5°) · PXG 0211 FWs (Diamana S+ 60; 15° and 21°) · PXG 0211 Hybrid (MMT 80; 22°) · Edel SMS Irons (SteelFiber i95; 5-GW) · Edel SMS Pro Wedges (SteelFiber i110; 56°, 60°) · Edel Classic Blade Putter (32") · Maxfli Tour Ball · Pinned Prism Rangefinder · SuperStroke Grips · Flightscope Mevo · TRUE Linkswear Shoes · Vessel Player V Pro 

Awards, Achievements, and Accolades

Posted

R11?? Fugly...I hate it. Someone I know bought one and gave it back to the proshop to flog if off and get what ever he could for it. Went back to the R9. Pros? Its adjustability, thats about it.

910?? I love its stealthy black looks and how it sets up, its muted sound and adjustability. I demoed this driver (D3) and really liked it, but I gained little to nothing over the driver I was using at the time, So I really could not justify the $450 price tag. Cons? Nothing really, Its a great driver.

  • Upvote 1

Posted


Originally Posted by Beachcomber

I have the R11 TP and love it. I hit 71.4% of my fairways today and hit 53.4% on average. I attribute a lot of my latest success to my R11 as it is very forgiving.

But I haven't hit the 910/D2 though...

Food for thought... Also I read an article that Taylor Made is releasing a new driver in February, and they are saying it is 20+ yards longer than the R11. So you may want to wait until February to pull the trigger on a new driver.



Wow, where did you find this info at? Can you send me a link?

Driver: Undecided..Someone help me decide
Fast 12 3 Wood 15* Stiff Shaft
A12 3 Hybrid 19* Stiff Shaft
CB Blade Irons (4-7) Dynamic Gold X-100 Shafts
MB Blade Irons (8-PW) Dynamic Gold X-100 Shafts
SM4 52* Oil Can Wedge - S300 Shaft
SM4 56* Oil Can Wedge - S300 Shaft
SM4 60* Oil Cal Wedge - Wedge Flex
2010 California Series - Monterey - 35'


Posted

Hit them both.... Have a 910m didn't like the R11 felt horrible IMO

:callaway: BB Alpha 815 DBD 10.5* Rogue Silver 60 :callaway: x2hot 3deep 14.5* (TBD) :tmade: RSI UDI 20* RIP Tour 90 :bridgestone: J40CB 4-PW Steelfiber i95 :vokey: SM4 50* KBS Tour V :vokey: SM5 54* KBS 610 :vokey: SM5 58* KBS HI-REV 2.0 MannKrafted Handmade Custom


Posted


Hi all,

Originally Posted by Beachcomber

I have the R11 TP and love it. I hit 71.4% of my fairways today and hit 53.4% on average. I attribute a lot of my latest success to my R11 as it is very forgiving.

But I haven't hit the 910/D2 though...

Food for thought... Also I read an article that Taylor Made is releasing a new driver in February, and they are saying it is 20+ yards longer than the R11. So you may want to wait until February to pull the trigger on a new driver.


Another driver ........has the Taylormade website got a poll on "WHAT COLOUR WOULD YOU LIKE YOUR BRAND NEW MODEL TAYLORMADE DRIVER THIS MONTH"

As for the original question, my preferrence is for the Titleist, however you have to try before you buy.

Cheers,

Jim

  • Upvote 1

 910d3, 910F, 910H, AP-2, Vokeys, and a Scotty Kombi.


Posted

They are both really solid drivers, but you will find a mixed bag of opinions from everyone on this site. I have the R11 and have never had any issues with its appearance. I guess results are what I base my opinion off of. Good Luck

  • Upvote 1

Golf is deceptively simple and endlessly complicated


Posted

I am also in between drivers at the moment. Right now i am demoing the Titleist 910 D3 and i love it, but before i buy it i want to hit the R11 first, just so i know which driver i like best

Driver- Titleist 910 D2 RIP 60 S- shaft

3 wood- Taylormade RBZ S shaft

Hybrid- Taylormade superfast 2.0 S shaft

Irons- Titleist AP2 712 DG- S300

Wedges- titleist vokey sm4

Putter- SC Fast Back


Posted

From what I've heard and tested, the 910 has more control, but the R11 has more distance. Sounds like you can't go wrong with either.

Driver: Undecided..Someone help me decide
Fast 12 3 Wood 15* Stiff Shaft
A12 3 Hybrid 19* Stiff Shaft
CB Blade Irons (4-7) Dynamic Gold X-100 Shafts
MB Blade Irons (8-PW) Dynamic Gold X-100 Shafts
SM4 52* Oil Can Wedge - S300 Shaft
SM4 56* Oil Can Wedge - S300 Shaft
SM4 60* Oil Cal Wedge - Wedge Flex
2010 California Series - Monterey - 35'


Posted




Wow, where did you find this info at? Can you send me a link?





http://www.golfwrx.com/forums/topic/537077-why-white-worked-and-a-look-into-2012/ Read the 2012 comments. I'm most likely going to jump on that 3W given the comments. But the next Taylor Made driver sounds like it will be beastly too.

  • Upvote 1

.

Awards, Achievements, and Accolades

  • 2 weeks later...
Posted

Accuracy, distance, shot shape, trajectory, etc. is more about the shaft than the head, assuming you make a good swing.  I hit both the R11 and D3 before settling on the D3.  I really, really like the Mitsubishi Ahina for Titleist shaft (formerly known as Whiteboard), and obviously the R11s at the shop didn't have that shaft so it's hard to make a direct comparison.  I ended up going with D3 for several reasons:  really liked the way the ball felt and sounded coming off of the face, didn't like the white so much, and the launch characteristics of the shaft were better in the Ahina than whatever I was hitting in the R11.

Also good to note, the Titleist has independently adjustable loft and face angle.  The R11 changes the lie angle, and their adjustment "chart" is confusing to me.  Seems like if you want to add more loft to the driver, then you have to open the face and flatten the angle.  Obviously I never quite comprehended how their adjustments worked, which probably contributed to me going with D3.

I've got the D3 9.5, adjusted down to 8.75 with the neutral (.5-deg open) setup.  Ahina for Titleist 73 gram shaft, X-flex.  It's a bomber, and I can work it to the right pretty easy.  Left is a little tougher, but that's probably because I'm starting with a half-degree open face.  When I set up for a big swing though (wide stance, right foot slightly open) I typically get a high, sweeping draw (and occasionally a low snapper).

Kevin

Titleist 910 D3 9.5* with ahina 72 X flex
Titleist 910F 13.5* with ahina 72 X flex
Adams Idea A12 Pro hybrid 18*; 23* with RIP S flex
Titleist 712 AP2 4-9 iron with KBS C-Taper, S+ flex
Titleist Vokey SM wedges 48*, 52*, 58*
Odyssey White Hot 2-ball mallet, center shaft, 34"

Awards, Achievements, and Accolades

Posted

Also FYI I have the R11 version hybrid, because I didn't like the head shape on the titleist (didn't inspire confidence) and I've always used TM hybrids.  Anyway, the white paint is peeling on the toe and the back of the hosel.  It's a pretty thick acryllic coating, moreso than a paint.  Somewhat irritating, as it makes the club look "used" even though I've only had it 4 months and hit it maybe 50 times.

Kevin

Titleist 910 D3 9.5* with ahina 72 X flex
Titleist 910F 13.5* with ahina 72 X flex
Adams Idea A12 Pro hybrid 18*; 23* with RIP S flex
Titleist 712 AP2 4-9 iron with KBS C-Taper, S+ flex
Titleist Vokey SM wedges 48*, 52*, 58*
Odyssey White Hot 2-ball mallet, center shaft, 34"

Awards, Achievements, and Accolades

Posted

I actually was debating on the same 2 clubs a month or so ago. I read as many reviews and comments as I could on both.

The only really negative review or comment on the D2 was how confusing the adjustment chart was. Since I don't own the D2, much less hit one, I really can't say anything positive or negative about it.

As far as the R11, you will have people who either love or hate the club. Many complaints I've read is that it is made by TM (some people just hate all TM proucts), or the white color. As far as which is longer, I can't answer that. But the comments and reviews sided more with the R11.

I purchase the R11, mainly because I got an excellent deal on the Driver and 3-wood combo. For me, the white club head took all of 5 minutes to get used to. Definately the longest and most solid driver I've ever owned. Adjustability was so easy! The one thing that may take some getting used, at least for me, was the sound at impact. Other than that, I love the R11 and don't see anything replacing it anytime soon.

Phillip


Posted


Originally Posted by Beachcomber

Also I read an article that Taylor Made is releasing a new driver in February, and they are saying it is 20+ yards longer than the R11. S



This mumbo jumbo gets thrown around every year ( 20 yard longer etc )...by the time I am 50, drivers will be hitting the ball 4,000 yards.

:tmade: SLDR X-Stiff 12.5°
:nike:VRS Covert 3 Wood Stiff
:nike:VRS Covert 3 Hybrid Stiff
:nike:VR Pro Combo CB 4 - PW Stiff 2° Flat
:cleveland:588RTX CB 50.10 GW
:cleveland:588RTX CB 54.10 SW
:nike:VR V-Rev 60.8 LW
:nike:Method 002 Putter


  • 3 months later...
Posted

I hate the white head.  Another thing is that no it wont and neither will any other driver on the market give you an extra 20 yards or maybe even 10 over your current driver unless yours is very very old.  The only good thing about the current drivers are the customization features and they are slightly more forgiving than ones of a few years back. The way to go is to get optomized for your current driver or for a new one.  I tried the titleist 910d2 as well and it does feel really nice of the face but it is very similar to the r11 results wise except for that stupid white head.  In all honesty I wouldn't buy either because it just doesn't seem worth it to me.  I currently have an r7 quad  the only difference between it and those two drivers is that they are ever so slightly easier to hit and they feel a bit better to hit but there is very very little difference on the course.  especially for a £200 price tag and for a club that i  will only use on about 10 holes a round.


Posted

Thank you all for the comments, but I ended up buying the R11 and it was a great choice. My friend got the D2 and I could care less which one I use, both are phenomenal. There is no wrong choice between the two.

Driver: Undecided..Someone help me decide
Fast 12 3 Wood 15* Stiff Shaft
A12 3 Hybrid 19* Stiff Shaft
CB Blade Irons (4-7) Dynamic Gold X-100 Shafts
MB Blade Irons (8-PW) Dynamic Gold X-100 Shafts
SM4 52* Oil Can Wedge - S300 Shaft
SM4 56* Oil Can Wedge - S300 Shaft
SM4 60* Oil Cal Wedge - Wedge Flex
2010 California Series - Monterey - 35'


Note: This thread is 5031 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.