Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4649 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Well I have the disease... Cast out over the top slice divot and nice looking fade.. It's not a 30 yard slice or anything.. Driver around 15 yards on a bad swing.. Few yards on short irons if I don't hit it well. An maybe 5-10 with long irons.. My handicap is a now a 8 and I manage my way around the course with my little slice.. I just would like to see consistency with the driver... More like a 5-10 yard fade. Any thoughts on fixing the over the top motion?

Posted

First it is not a slice it is a power fade.  Without video it is impossible to comment.  There are tons of things that you might be doing.

Awards, Achievements, and Accolades

Posted

if it's a fade your smack on target, not on the right of it. A fade is never right of the target, it goes left and comes back but stays pretty much a todd left of the target until the pitch and kick to the right.

it's paradoxal yet a more inline BS, almost ext/int sensation swing can help to reduce the over the top motion.get your left arm going back straight all the time.

I beleive it's tom watson who said 'I finaly understood the golf swing when I felt swinging outside then in";


  • Moderator
Posted

A push fade will start right of where your feet and shoulders are aimed and move more right.  Jack Nicklaus played this shot a lot.  An over the top swing (out to in) can produce a pull fade where the ball starts left of where your feet and shoulders are aimed and curve back to the right.  They both are playable shots.

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Awards, Achievements, and Accolades

Posted
Originally Posted by bubble

if it's a fade your smack on target, not on the right of it. A fade is never right of the target, it goes left and comes back but stays pretty much a todd left of the target until the pitch and kick to the right.

it's paradoxal yet a more inline BS, almost ext/int sensation swing can help to reduce the over the top motion.get your left arm going back straight all the time.

I beleive it's tom watson who said 'I finaly understood the golf swing when I felt swinging outside then in";

A ball with positive axis tilt is a fade the target line does not matter.

5 Simple Keys® Associate

"Golf is not a game of great shots. It's a game of the most accurate misses.

The people who win make the smallest mistakes." - Gene Littler

Awards, Achievements, and Accolades

Posted
If you fade it the same amount every time I wouldn't try to fix it. I would play for the fade, makes it easy to hit the green. Aim away from the pin and play it.

Driver: 10.5* callaway Razr Hawk Tour - 350 yards(usually into the wind, it can be windy here. at least 400 with a little wind behind me)

Hybrids: 2 and 3 callaway Hybrid razr tour (312 and 287 respectively)

Irons: 3i-10i callaway forged standard length(278, 263, 250, 235, 221, 213, 201, 190)

Wedges: callaway jaws cc 52* 12 approach, 56* 16 sand, 60* 13 lob (0-185)

Odyssey Black tour #9 putter(5 ft, i'm always at least within 5 feet on my approach shot)

I wonder who on this forum is a PGA tour pro, disguised as a normal player.. 

2013: play in the US amateur qualifier

 


Posted
I'm left handed by the way haha. And I will hope to have video this weekend sometime.. I can manage with the fade but its hard to work a draw because sometimes I cast the club over the top and double cross myself

Posted
The most important key for me is to initiate the downswing with the hips and let the shoulders and arms follow.

Posted
The basic fix: smooth transition starting with the hips. Relax the rear arm keeping the back of the leading hand along the swing plane.

Posted
I understand the plane and initiating with the hips now.. Watched a few videos and YouTube an think it helped. Anyone know any good drills?

Posted
Originally Posted by EverythingGolf

A ball with positive axis tilt is a fade the target line does not matter.


This is cause, not effect !

I'm not talking causality. A fade you are in control, a slice you may think you are in control but actualy, you are not.

the difference is the wording. language is beautifull (va niquer encule de putain de sa mere) it is so lovely the language n'est-ce pas ?

there are different words for different effects, If you control the back spin axis of the ball you are in control.

so ! let's go back to the beginer golf books. the wording for trajectory on a chosen target line waries event if the cause is the same.

king of like a peeble, stone rock or bolder. same limestone or granit, yet different words for different sizes.


Posted

You said a fade is never right of the target, that is incorrect.

5 Simple Keys® Associate

"Golf is not a game of great shots. It's a game of the most accurate misses.

The people who win make the smallest mistakes." - Gene Littler

Awards, Achievements, and Accolades

Posted
You said a fade is never right of the target, that is incorrect.

It's not if you're a lefty ;) I think he's meaning a fade that is played, so it's fades to the target? But of course is right of target (starting) line.

Driver: 10.5* callaway Razr Hawk Tour - 350 yards(usually into the wind, it can be windy here. at least 400 with a little wind behind me)

Hybrids: 2 and 3 callaway Hybrid razr tour (312 and 287 respectively)

Irons: 3i-10i callaway forged standard length(278, 263, 250, 235, 221, 213, 201, 190)

Wedges: callaway jaws cc 52* 12 approach, 56* 16 sand, 60* 13 lob (0-185)

Odyssey Black tour #9 putter(5 ft, i'm always at least within 5 feet on my approach shot)

I wonder who on this forum is a PGA tour pro, disguised as a normal player.. 

2013: play in the US amateur qualifier

 


  • Moderator
Posted
Originally Posted by kcarile

I'm left handed by the way haha. And I will hope to have video this weekend sometime.. I can manage with the fade but its hard to work a draw because sometimes I cast the club over the top and double cross myself

Basically two or three reasons you would come over the top.  Turning too level on the backswing, can load the shaft too shallow and then has to get steep on the downswing or you don't have enough weight forward on the downswing.  Most players that come "over the top"  have very little or not enough weight forward at impact.  You would fix this by keeping the right knee flexed longer.  Assuming you keep you head steady and not getting the club too far in on the backswing, check out the weight forward, Key#2, drills in this thread.  If you are making too flat a shoulder turn and/or loading the shaft too flat on the backswing, then check out the Key#1 and Key#4 takeaway drills. http://thesandtrap.com/t/61376/5sk-video-thread

Mike McLoughlin

Check out my friends on Evolvr!
Follow The Sand Trap on Twitter!  and on Facebook
Golf Terminology -  Analyzr  -  My FacebookTwitter and Instagram 

Awards, Achievements, and Accolades

Posted
Coach went out on the range with me today.. Turns out I was only a little over the top if anything.. I added an extra hinge in my wrists at the top of my backswing for some reason!?!

Note: This thread is 4649 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 470 - 2026-01-13 Got some work in while some players were using the sim, so I had to stick around. 🙂 Good thing too, since… I hadn't yet practiced today until about 6:45 tonight. 😛 
    • That's not quite the same thing as what some people messaged me today.
    • Day 152 1-12 More reps bowing wrists in downswing. Still pausing at the top. Making sure to get to lead side and getting the ball to go left. Slow progress is better than no progress.  
    • Yea, if I were to make a post arguing against the heat map concept, citing some recent robot testing would be my first point. The heat map concept is what I find interesting, more on that below. The robot testing I have looked at, including the one you linked, do discreet point testing then provide that discrete data in various forms. Which as you said is old as the hills, if you know of any other heat map concept type testing, I would be interested in links to that though! No, and I did say in my first post "if this heat map data is valid and reliable" meaning I have my reservations as well. Heck beyond reservations. I have some fairly strong suspicions there are flaws. But all I have are hunches and guesses, if anyone has data to share, I would be interested to see it.  My background is I quit golfing about 9 years ago and have been toying with the idea of returning. So far that has been limited to a dozen range sessions in late Summer through Fall when the range closed. Then primarily hitting foam balls indoors using a swing speed monitor as feedback. Between the range closing and the snow flying I did buy an R10 and hit a few balls into a backyard net. The heat map concept is a graphical representation of efficiency (smash factor) loss mapped onto the face of the club. As I understand it to make the representation agnostic to swing speed or other golfer specific swing characteristics. It is more a graphical tool not a data tool. The areas are labeled numerically in discrete 1% increments while the raw data is changing at ~0.0017%/mm and these changes are represented as subtle changes in color across those discrete areas. The only data we care about in terms of the heat map is the 1.3 to 1.24 SF loss and where was the strike location on the face - 16mm heal and 5mm low. From the video the SF loss is 4.6% looking up 16mm heal and 5mm low on the heat map it is on the edge of where the map changes from 3% loss to 4%. For that data point in the video, 16mm heal, 5mm low, 71.3 mph swing speed (reference was 71.4 mph), the distance loss was 7.2% or 9 yards, 125 reference distance down to 116. However, distance loss is not part of a heat map discussion. Distance loss will be specific to the golfers swing characteristics not the club. What I was trying to convey was that I do not have enough information to determine good or bad. Are the two systems referencing strike location the same? How accurate are the two systems in measuring even if they are referencing from the same location? What variation might have been introduced by the club delivery on the shot I picked vs the reference set of shots? However, based on the data I do have and making some assumptions and guesses the results seem ok, within reason, a good place to start from and possibly refine. I do not see what is wrong with 70mph 7 iron, although that is one of my other areas of questioning. The title of the video has slow swing speed in all caps, and it seems like the videos I watch define 7i slow, medium, and fast as 70, 80, and 90. The whole question of mid iron swing speed and the implications for a players game and equipment choices is of interest to me as (according to my swing speed meter) over my ~decade break I lost 30mph swing speed on mine.
    • Maxfli, Maltby, Golfworks, all under the Dicks/Golf Galaxy umbrella... it's all a bit confounding. Looking at the pictures, they all look very, very similar in their design. I suspect they're the same club, manufactured in the same factory in China, just with different badging.  The whacky pricing structure has soured me, so I'll just cool my heels a bit. The new Mizuno's will be available to test very soon. I'm in no rush.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.