• Announcements

    • iacas

      GAME GOLF Ryder Cup Contest   09/22/2016

      Join our GAME GOLF Ryder Cup Challenge to win an autographed GAME GOLF, a Pebble Steel watch, and many more great prizes!
Sign in to follow this  
Followers 0
ElMachoGolf

Good and cheap golf irons?

38 posts in this topic

I am in need of good but cheap golf irons. I have heard about the Taylormade Burner 2.0's but there are some cons that made me nervous. My budget is $300 but I have $50 dollars off at Golf Galaxy. I am ok with new or used clubs. My clubs right now are about 15 year old Wilson K28 hand me downs. So any suggestions would help. :-D Thank You.
0

Share this post


Link to post
Share on other sites

Want to get rid of this advertisement? Sign up (or log in) today! It's free!

Ii have the burner 2.0s. I like them. Not sure about what cons could be with irons though so I am probably not much help. Just wanted to throw out there that I bought them about 2 or 3 years ago with an open budget after trying them, the rocketballz and another TM iron, I forget what they were, and I have not regret my purchase.
0

Share this post


Link to post
Share on other sites

1.  It might be a good idea to get fit for a set of irons.  This might be more important for somebody with a good and repeatable swing.

2.  Find an iron head that looks good at setup but that also has the forgiveness you need depending on your skill level.  But more important than the iron head is the shaft....it is the engine of the club.  Depending on your swing and swing speed some shafts will fit you better than other shafts.

3.  You can get some great deals on used and even new clubs online.  globalgolf, rockbottomgolf, golfio, 3balls, and callawaypreowned are all great sites to find a good deal on.  And as far as new vs. used, on those sites, a very good to like new condition club is pretty darn close to a brand new club.  Then there is also ebay.  You can find some very good deals on ebay, but you need to know who you are buying from....look at the details, pictures, and seller rating and don't be afraid to email them questions before you buy.

Oh and they have some used golf clubs or just good deals at some golf stores and you can verify the condition of the clubs and pick the brains of the employees...also a good option.

4.  Most of all, know what you want to buy and do your homework before you pull the trigger.  It can be a process, but it is worth it to get the right clubs.

Hopefully i didn't make this too difficult or overwhelming, good luck on your purchase!

0

Share this post


Link to post
Share on other sites
Awards, Achievements, and Accolades

That would be great but wouldn't it be pricey. Thanks for the info, can I go to Golf Smith or Golf Galaxy and have them fit for me and how much would it be.

:-)

0

Share this post


Link to post
Share on other sites

I agree with the importance of getting fitted. When I first started to golf a few years back I bought a cheap set off the internet from rockbottom. They served me well but it wasn't until i got fitted last year that I saw improvements and consistency in my game. It is an added cost but where I got fitted, they took the price of the fitting off of the total price of the irons as long as I bought from them. If you don't get fitted the sites listed above are great. I would also throw in tgw and carlsgolfland as good places to buy offline. As for iron sets...I would second the burner 2.0 and have also heard good things about cobra amp cells. Best of luck in your search!
0

Share this post


Link to post
Share on other sites

May I ask where you got your clubs fitted and I'll definitely check out the Cobra Amp Cells.

0

Share this post


Link to post
Share on other sites

"Good but cheap" irons = Tour Edge. The Exotics range is great. Any of the Exotics XCG series of irons would be terrific value, as they can generally picked up new on ebay or through the big online dealers for not a lot of money. I have the XCG-3s and think they are wonderful, but I think the company is up to XCG-5 or  XCG-6, now.

They sell for very low sums compared to their quality - and all because, it seems, Tour Edge has no interest in paying tour pros stupid money for advertising their product, and because Tour Edge seems to have become labeled as a manufacturer of woods rather than irons...

0

Share this post


Link to post
Share on other sites

I think my next set will be 1 Irons. www.1irongolf.com They've got some good deals on used / demo sets. I would imagine these would be like new. It takes a little time to "unlearn" your current swing, but it's worth it. Plus, the website has a ton of very well written articles on the golf swing and how to improve your game.
0

Share this post


Link to post
Share on other sites

I live in Central PA so I got them fitted at a local place. I don't know where you live, but maybe call around to some local courses/golf shops or try to find some reviews on places near you.

0

Share this post


Link to post
Share on other sites

I live in Cleveland Ohio so maybe I could go to Golf Smith or Golf Galaxy. Also thanks for the tips guys.

:-)

0

Share this post


Link to post
Share on other sites

Currently (7/21/14) there are over 11,000 right handed iron sets for sale on eBay for $300 or less.

Callaway (855)

Mizuno (591)
Ping (993)
Wilson (620)

If you use eBay, I suggest that you look at the seller information and use one with a 95%+ positive feedback. I have never had a problem.

0

Share this post


Link to post
Share on other sites

Now I'm reading about the Nike Men's VR_S X Irons are they good?

0

Share this post


Link to post
Share on other sites

Get fit somewhere with irons that you feel fits your abilities, then find a pro you like at a golf course and get him to buy it for you.  They'll get you better deals than you'll find at any golf store.  Also gets you to know your local pro and get other good deals for lessons or golf deals.

0

Share this post


Link to post
Share on other sites
Awards, Achievements, and Accolades

TAYLORMADE BURNER 2.0 COMBO 3H, 4H, 5-PW IRONS SENIOR GRAPHITE VERY GOOD are on sale on EBay should I bid? Link: http://www.ebay.com/itm/TAYLORMADE-BURNER-2-0-COMBO-3H-4H-5-PW-IRONS-SENIOR-GRAPHITE-VERY-GOOD-/380954501351?pt=Golf_Clubs&hash;=item58b2a860e7
0

Share this post


Link to post
Share on other sites

Just a couple of things to double check...

Global Golf, the seller, has almost 400,000 sales with 99.6% positive feedback. I've used this company. They are a winner.

RETURN POLICY - Your satisfaction is important to Global Golf. If for any reason, you are not happy with your item, it may be returned within 14 days.

The condition is very good, meaning that normal ball marks on the faces; minor scratching on the soles; no significant dings on the heads; no significant wear on the shafts.

The clubs you are buying are 3 and 4 hybrids and 5-pw irons.  All clubs are right-handed.

All shafts are senior graphite. The hybrid shafts are TaylorMade Burner RE*AX 60. The irons shafts are TaylorMade Burner 2.0 SuperFast 65. All clubs have standard lie.

There is no headcover on the hybrids.

If all of these meet your needs, go for it.

0

Share this post


Link to post
Share on other sites

TAYLORMADE BURNER 2.0 COMBO 3H, 4H, 5-PW IRONS SENIOR GRAPHITE VERY GOOD are on sale on EBay should I bid? Link: http://www.ebay.com/itm/TAYLORMADE-BURNER-2-0-COMBO-3H-4H-5-PW-IRONS-SENIOR-GRAPHITE-VERY-GOOD-/380954501351?pt=Golf_Clubs&hash;=item58b2a860e7

Do you know what your swing speed with a driver is? I would guess it would need to be pretty slow for that shaft so be careful.

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0



  • Want to join this community?

    We'd love to have you!

    Sign Up
  • 2016 TST Partners

    GAME Golf
    PING Golf
    Lowest Score Wins
  • Posts

    • Mass and Force If equal force is applied to two objects, the object with the lesser mass will have the greater resulting acceleration. Correspondingly, the object with a lesser mass will travel a greater distance over an allotted time interval. In order for two objects to travel the same distance, a greater force must be applied to the object with a greater mass. (From the Internet) This does not really speak to my interest. But when you research on a quick Internet search about greater mass striking an object, this is all you find. Maybe this is why it's hard to understand “mass” and ball striking. R.L. Welsh Should You Be Using A Heavier Golf Club?  (Again, this is from the Internet) Golfers vary. If you give Davis Love III or Brad Faxon a club which is slightly heavier than what they are used to it will noticeably throw them off. Hulk Hogan or Arnold Schwarznegger will never notice the difference. The ball will just go farther. The nature of their muscle mass is what limits their top-end swing speed. Long, loose muscles generate the most speed. Large, bulky muscles generate the most torque. Fast ball pitchers and quarterbacks are never built like tight ends and linebackers. Wayne Gretsky is surprisingly scrawny and puny looking without his shirt on, yet he was able to shoot the hockey puck with great velocity. It’s a case of John Deere versus Kawasaki. The fastest motorcycle does a terrible job hauling a lot of weight and the strongest tractor is blown away by even a dinky, little motorcycle in the quarter-mile. If you add a second, two hundred pound rider to the back of the motorcycle you will drastically reduce its zero-to-sixty speed time. Adding the same weight to the tractor will have little or no impact on its rate of acceleration. A tall, scrawny runner might easily beat a stocky, muscular decathlete in a footrace until both men are given thirty-pound backpacks to wear during the race. How do we determine the optimum weight of a golf club? Well, we know that a hummingbird smashing into a golf ball at 100 miles per hour would, just before it died, cause the ball to fly only a very short distance. We also know that a massive locomotive smashing into a golf ball at 20 miles an hour would not cause the ball to go very far either. The optimum weight/speed combination rests somewhere in between. Anyone who has hit range balls with a weighted training club has experienced the same results: that ball just does not go very far regardless of how hard the golfer tries. Golf clubs can easily be made very light. That enables them to be swung at great speed, but to little avail if the weight falls below a certain amount. A lightweight, plastic, juvenile club does even more poorly than does the weighted, training club. Finding the optimum weight combination would be simple if all humans were the same size and weight and possessed the same strength and suppleness. An Iron Byron test machine or a physics professor could decide the issue in an hour or two. Unfortunately, we all vary a great deal and manufacturers are forced to go with a general average weighting pattern. There is no one precise formula. Don’t ever let anyone tell you differently. (I think this answers my question! RLW) Many, many women and seniors labor under the misassumption that ultra-light clubs will enable them to hit the ball farther. Generally, the opposite is true. They can get the club up more easily, but when it comes down to the ball it does not have enough oomph to send the ball flying. (this is my thought when I strike the ball with my Callaway X18R long irons; However, the PW is so heavy, greater mass, I notice how easy the swing and how far the ball travels with little effort. RLW) Some companies construct their ladies’ club heads so that they are actually heavier than the male counterparts. It is the golfer who can generate high club head speeds who generally benefits most from lower head weights. Golfers with slow swing speeds are the ones who benefit most from the added authority given by extra weight both overall weight and swing weight. Unfortunately, weak and elderly golfers often do not have the strength endurance to use the heavier clubs for a complete round. Strong, muscular golfers do have ample strength endurance, however. They are the ones who should experiment with added weight. They are the ones who should try heavier shafts, heavier heads and heavier grips. There are an infinite number of combinations. Adding a few extra grams to both head and grip might be the answer. (But we have to know how to do this properly; Hence go to the Fitter RLW) The Basics of MOI Matching Your Golf Clubs By Jeff Sheets With MOI matching we are attempting to place the ideal amount of resistance into the golfer’s hands that they can control the most consistently. (ie: Heavy head weight too! I have yet to have a fitter even mention this approach. RLW ) Too much resistance and he or she will struggle to accelerate the club through impact and/or have difficulty controlling it. With too little resistance the golfer may over-swing, cast the club, or simply lack the mass in the club head necessary to maximize distance. (Eureka!!!) The objective is to identify the optimum mass distribution for the golfer (head weight, length, shaft balance, etc.) and then replicate it into every club in the set. The Auditor MOI scale for complete clubs will assign a higher value to a club that has a greater resistance to swinging. In layman's terms, the lower the complete club’s MOI, the easier it will be to swing, and vice versa. Some club-fitters may realize that the same factors that influence a complete club's MOI are identical to the factors that influence swing weight. If you have made this determination, then you are correct. Making a club longer in length makes it more difficult to swing (increased MOI), but it also increases its swing weight. Making the head lighter in weight makes it easier to swing, while at the same time it reduces its MOI. The same exact factors that influence swing weight allow us to fine-tune the precise MOI target we seek in a completed club.   My original question to Tom Wishon and suggested Local Fitter was: Is it so hard to make a 6iron 280grams club-head weight? Gentlemen, I have no criticism here for anyone. I am just trying to understand. I added the bold and underline for my emphasis to “mass” or “heavy club head.” This all seems very logical to me, even if engineers do not agree. My experience tells me my 60degree Sand Wedge takes a lot more swing than my PW with a heavy club head, to make the ball travel the same distance. This alone tells me to increase the club head weight in my longer irons to calm down my swing and send the ball a greater distance with a smooth easy swing, and a consistent strike in the 'sweet.' Maybe I should put a longer shaft on my 60 SW to see if I can go the same distance with the same easy swing as my heavy PW? I thought to ask you Makers & Builders these questions thinking perhaps it has already been tried; Or perhaps some scientific principle may prove it does or does not work. But no one has yet presented any information as to the outcome of my so-called the “theory.” In a fitting I am just pointed back towards modern conventional “theory” that the Top Ball Strikers on tour have supposedly proven: “Light is better, and longer for more speed.” (Tour players mean nothing to me and my game.) Again, desiring answers to these questions are why I would go to a Custom Club maker for help. But I am finding most makers are use to doing things a certain way; Mainly the way they have been brought up in the business, the way the current business model tells them, using the current technology which is focused on “lighter is better.” Hey, what the heck, you sell a great deal of clubs the way it is. Unfortunately this is only slightly different from “mass produced” clubs. You are still in the same camp as you can not add weight to the Club Head, nor do you think it is necessary. Food for thought: The person with no preconceived notions on how “things should be” will step out and experiment to see if there is a better way. If you would say “no” that will not work, and point to the “Pro's” and what is being mass produced does work; the truth is the public does not even know what the “Pro's” are truly playing; The public knows nothing about their clubs. So I guess I will head out to the shed and start melting lead and filling in the open cavity on the back side of my cavity backed irons. Can't hurt much. The real funny thing about all of this is that my 73 year old Aunt was telling me how she saw my Grandfather out in his work shed 40 some years ago, drilling on his irons in an attempt to add weight. I never knew this before. I guess the apple does not fall too far from the tree. He was not an avid golfer but I guess he had an idea of what might work better. Sincerely, R.L. Welsh
    • So I just played my round best yesterday and only lost 2 golf balls! Which is really good for me because the course I live on has so much water and narrow fairways. The first time I went I lost a 24 pack of laddies.... so this made me happy in the wallet to say the least haha. anyhow I'm not sure where I should spend more time practicing so I wrote down my score into 3 different sections  shots to get to pitching or chipping distance. pitching and chipping. putts.   my score was a 100 with a 45 on the front and a 55 on the back... (I smoked on the back and I blame the 10 extra strokes because of this.)  shots to chipping and pitching: 18 F 22B pitching and chipping: 9F 8B putts: 18 F 22 B Penalties: 0F 2B so in my opinion I think my distance with my long game is there I just need to work on my accuracy to lower my chips and pitches. my pitching chipping and putting all go together because I've already used my GiR so my first chip or pitch is actually counting as my first putt (if I'm going for scratch golf. my putting is horrendous because of the amount of pitching and chipping I had there should be no reason for any 3 putts at all. The only time I should 3 putt is if I hit an iron to the green. tell me what u guys think
    • Mitt Romney was slow in releasing his tax returns in 2012; when he did release them, it revealed nothing of interest, and the rumors about what he was hiding quickly fell by the wayside. In reality, the worst thing that could happen to Donald Trump in releasing his tax returns now is that they would confirm what people already assume, based on the extensive investigative reporting on his financials, his foundation, and his business connections. He doesn't have anything to lose; he's just too vain to capitulate.
  • TST Blog Entries

  • Images

  • Today's Birthdays

    1. bandstan
      bandstan
      (46 years old)
    2. boobiemiles
      boobiemiles
      (25 years old)
    3. ElsieOlson
      ElsieOlson
      (77 years old)
    4. Matt66
      Matt66
      (26 years old)
  • Blog Entries