Jump to content
Check out the Spin Axis Podcast! ×

Recommended Posts

Posted

I read that two guys played 18 holes and putted only 15 times.  Had 3 up and downs.  Longest putt was 25 feet.  Cannot find the source.  It was on line.  Anybody know?  One was in 1968 as i recall.  BTW a number of PGA pros have played 18 and putted only 18 times.  Yikes! 


Posted

The best I can document for myself is 26 putts (10 GIR) for 18 holes.

To break or tie the record one would need a lot of shots on the fringe and/or many very simple chips.  GIR and low putt totals typically are not compatible.

Brian Kuehn

Awards, Achievements, and Accolades

Posted

Actually, a number of PGA players have played 18 with only 18 putts.  Go to this site:

golf.about.com/od/progolftours/qt/pfewestputts18.htm


Posted

Being a higher HDCP'er, my best round putting was 36 putts...

Personal goal for this year is to play a round (18 holes) and have fewer than 36 putts...

The key for me to do this would be to get better at chipping and getting the ball closer to the hole for my first putt... 


Posted

I have had 26 putts a few times. In almost all those instances, there was probably 3 or 4 chip ins, with the cup cut pretty close to the fringe. 

Last I checked, I was averaging 29.8 putts per round. 

In My Bag:
A whole bunch of Tour Edge golf stuff...... :beer:

Awards, Achievements, and Accolades

Posted

I've had 24, once... 

What's in Shane's Bag?     

Ball: 2022 :callaway: Chrome Soft Triple Track Driver: :callaway:Paradym Triple Diamond 8° MCA Kai’li 70s FW: :callaway:Paradym Triple Diamond  H: :callaway: Apex Pro 21 20°I (3-PW) :callaway: Apex 21 UST Recoil 95 (3), Recoil 110 (4-PW). Wedges: :callaway: Jaws Raw 50°, 54°, 60° UST Recoil 110 Putter: :odyssey: Tri-Hot 5K Triple Wide 35”

Awards, Achievements, and Accolades

Posted

I caddied for someone as a regular when I was a kid and the first time I caddied for him was the club championship.   Second round he had 24 putts.  That's the lowest I know of.   I think the lowest I ever had was 28. 

—Adam

 

Awards, Achievements, and Accolades

  • 8 years later...
Posted

I’ve had 21 putts in a round with a spider putter about 4 years ago and had 18 putts in a round using an Arnold Palmer “The Original” putter this year. Hit no greens in regulation for 40 point off 15. 2 chip ins and 2 2 putts.


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 152 1-12 More reps bowing wrists in downswing. Still pausing at the top. Making sure to get to lead side and getting the ball to go left. Slow progress is better than no progress.  
    • Yea, if I were to make a post arguing against the heat map concept, citing some recent robot testing would be my first point. The heat map concept is what I find interesting, more on that below. The robot testing I have looked at, including the one you linked, do discreet point testing then provide that discrete data in various forms. Which as you said is old as the hills, if you know of any other heat map concept type testing, I would be interested in links to that though! No, and I did say in my first post "if this heat map data is valid and reliable" meaning I have my reservations as well. Heck beyond reservations. I have some fairly strong suspicions there are flaws. But all I have are hunches and guesses, if anyone has data to share, I would be interested to see it.  My background is I quit golfing about 9 years ago and have been toying with the idea of returning. So far that has been limited to a dozen range sessions in late Summer through Fall when the range closed. Then primarily hitting foam balls indoors using a swing speed monitor as feedback. Between the range closing and the snow flying I did buy an R10 and hit a few balls into a backyard net. The heat map concept is a graphical representation of efficiency (smash factor) loss mapped onto the face of the club. As I understand it to make the representation agnostic to swing speed or other golfer specific swing characteristics. It is more a graphical tool not a data tool. The areas are labeled numerically in discrete 1% increments while the raw data is changing at ~0.0017%/mm and these changes are represented as subtle changes in color across those discrete areas. The only data we care about in terms of the heat map is the 1.3 to 1.24 SF loss and where was the strike location on the face - 16mm heal and 5mm low. From the video the SF loss is 4.6% looking up 16mm heal and 5mm low on the heat map it is on the edge of where the map changes from 3% loss to 4%. For that data point in the video, 16mm heal, 5mm low, 71.3 mph swing speed (reference was 71.4 mph), the distance loss was 7.2% or 9 yards, 125 reference distance down to 116. However, distance loss is not part of a heat map discussion. Distance loss will be specific to the golfers swing characteristics not the club. What I was trying to convey was that I do not have enough information to determine good or bad. Are the two systems referencing strike location the same? How accurate are the two systems in measuring even if they are referencing from the same location? What variation might have been introduced by the club delivery on the shot I picked vs the reference set of shots? However, based on the data I do have and making some assumptions and guesses the results seem ok, within reason, a good place to start from and possibly refine. I do not see what is wrong with 70mph 7 iron, although that is one of my other areas of questioning. The title of the video has slow swing speed in all caps, and it seems like the videos I watch define 7i slow, medium, and fast as 70, 80, and 90. The whole question of mid iron swing speed and the implications for a players game and equipment choices is of interest to me as (according to my swing speed meter) over my ~decade break I lost 30mph swing speed on mine.
    • Maxfli, Maltby, Golfworks, all under the Dicks/Golf Galaxy umbrella... it's all a bit confounding. Looking at the pictures, they all look very, very similar in their design. I suspect they're the same club, manufactured in the same factory in China, just with different badging.  The whacky pricing structure has soured me, so I'll just cool my heels a bit. The new Mizuno's will be available to test very soon. I'm in no rush.  
    • Day 23 - 2026-01-12 Finally outdoors again with 10 minutes of 7 iron work in the net. Also mirror work. Excited to get back on the range tomorrow and maybe do some film.
    • Day 10: 2026.01.12 Hit 25 balls at the range, working on rotating right hip during backswing.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.