Jump to content

Recommended Posts

Day 5: 12/14/2014

More mirror work today. I feel like I'm almost ready to take the PPJ swing to the garage mat/net. 

My bag is an ever-changing combination of clubs. 

A mix I am forever tinkering with. 

Awards, Achievements, and Accolades

Day 6: 12/15/2024

Today I worked on my PPJ priority piece in front of the mirror for a bit, then I took it out to the garage and hit some balls into the net. That felt productive. At first I had to battle my hit instinct and my "old swing". But I found if I did my PPJ one piece at a time and then added the next part to it I got to where I was making some solid contact into the net and I really started to feel ... dare I say comfortable. Well at least not like an insane-chicken on no-doze. 

Tomorrow more slow-mo mirrors and then more hitting into the net. I really don't want to start reacting to ball flight yet. 

My bag is an ever-changing combination of clubs. 

A mix I am forever tinkering with. 

Awards, Achievements, and Accolades

Day 226 (15 Dec 24) - Easy day, limited swings with middle irons and hard foam balls.   Focus was on setup and tempo. 

Ping G400 SFT 10deg  R flex
Ping G410 3w R flex
Ping G400 3h and 4h R flex
Taylormade SLDR 5i thru PW graphite shaft R flex
Cleveland CBX wedges - 50, 54, 58 or 52, 58 (depending on my mood)
Odyssey Versa or White Steel #5
Srixon Q Star

Awards, Achievements, and Accolades

Day 151: did a stack session. Worked on some rehearsal takeaways for my backswing stuff between sets. 

-- Daniel

In my bag: :callaway: Paradym :callaway: Epic Flash 3.5W (16 degrees)

:callaway: Rogue Pro 3-PW :edel: SMS Wedges - V-Grind (48, 54, 58):edel: Putter

 :aimpoint:

Awards, Achievements, and Accolades

Day 7: 12/16/2024

I was anxious to get some practice in so I've already been working on my PPJ in front of the mirror for a while this morning. Starting to feel more natural. 

I got in the garage net and that went well. ... Topped a few. I noticed that sometimes the J part of my PPJ gets really vertical. Things go a lot better when I drive my lead leg straight away from the ball and not up. (That's the thought in my head anyway.) 

If none of that makes any sense to you, don't worry. I'm sure everyone's working on their own priority pieces and I don't need to understand the details of what you are working on. Just as long as it works for you. 

On a side note, I feel like I'm actually grasping this priority piece a little quicker than I thought I would. When Yoda first laid it out for me I thought it might take me forever to get the timing down. But, I'm getting it right now (or at least better than it was) a lot. And that's encouraging. Maybe I'm not as uncoordinated as I thought. ... I say that as I spill coffee down the front of my shirt. 

unathletic-kid.gif.5b2fd68cb4f3f67da3b2d125b2fe8e08.gif

My bag is an ever-changing combination of clubs. 

A mix I am forever tinkering with. 

Awards, Achievements, and Accolades

Day 227 (16 Day 24)  - Temps back in the 60’s - but a full day of other obligations meant limited time, so I worked on setup, tempo and  hitting shorter punch shots focused on making solid contact with the hard foam balls.   This drill really helps to dial in ball first contact as you’re not worried about a specific distance or pin - just making contact.  Of course as I can hit from varied lies, not two shot setups are exactly perfect replicating being on the course.  

Ping G400 SFT 10deg  R flex
Ping G410 3w R flex
Ping G400 3h and 4h R flex
Taylormade SLDR 5i thru PW graphite shaft R flex
Cleveland CBX wedges - 50, 54, 58 or 52, 58 (depending on my mood)
Odyssey Versa or White Steel #5
Srixon Q Star

Awards, Achievements, and Accolades

  • Administrator

Day 77 - 2024-12-16

Had a lesson and then a good GEARS lesson, so I hit some balls after that. Turn, pick up. Left wrist stays cupped.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Day 152: mirror work for a while with the TV on. Worked on my backswing stuff. 

-- Daniel

In my bag: :callaway: Paradym :callaway: Epic Flash 3.5W (16 degrees)

:callaway: Rogue Pro 3-PW :edel: SMS Wedges - V-Grind (48, 54, 58):edel: Putter

 :aimpoint:

Awards, Achievements, and Accolades

Day 228 (17 Dec 24) - Morning drills today as the balance of the day is committed elsewhere.  Repeat of yesterday except it was 6i with the primary focus being on the club face at address.  A fun little drill where I deliberately try to hit slight fades and draws using the hard foam practice balls of course.

Ping G400 SFT 10deg  R flex
Ping G410 3w R flex
Ping G400 3h and 4h R flex
Taylormade SLDR 5i thru PW graphite shaft R flex
Cleveland CBX wedges - 50, 54, 58 or 52, 58 (depending on my mood)
Odyssey Versa or White Steel #5
Srixon Q Star

Awards, Achievements, and Accolades

Day 8: 12/17/2024

Okay I took my new PPJ swing thought to the range today. I wasn't sure I was quite ready to do so, but I'm glad I did. 

When I got it right it was good... really good. When I got it wrong it was a major fail. I hit lots of really ugly ones. But I didn't let that deter me. I stayed committed and focused on the PPJ and I avoided any temptation to go back to what I was doing before just so that I could "look" better at the range. I'm pretty excited about what I saw when I got it right. 

I hit the 6 iron mostly (nearly all block work today). I also hit about 6 balls each with the PW, 8I, 5W and Driver. Those had varying degrees of success. I did crack one drive that let me feel and see what the changes will look like once I get fully trained. 

Anyway, I'm going to go back to the mirror work for a couple of more days before bringing it back to the range. I do feel like if I can get this right my swing will improve a lot. So I think its worth the effort. I liked the way it looked on GEARs when I get it right, and I like the results I got at the range when I got it right. Now the goal is to work towards getting it right more often. 

My bag is an ever-changing combination of clubs. 

A mix I am forever tinkering with. 

Awards, Achievements, and Accolades

Day 153: putted for a while using the 2 cups drill inside. Working on bead primarily. Contact was really good. 

-- Daniel

In my bag: :callaway: Paradym :callaway: Epic Flash 3.5W (16 degrees)

:callaway: Rogue Pro 3-PW :edel: SMS Wedges - V-Grind (48, 54, 58):edel: Putter

 :aimpoint:

Awards, Achievements, and Accolades

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 335 - More putting work, with the focus on setup and hitting the sweet spot. 
    • Day 153: putted for a while using the 2 cups drill inside. Working on bead primarily. Contact was really good. 
    • Day 8: 12/17/2024 Okay I took my new PPJ swing thought to the range today. I wasn't sure I was quite ready to do so, but I'm glad I did.  When I got it right it was good... really good. When I got it wrong it was a major fail. I hit lots of really ugly ones. But I didn't let that deter me. I stayed committed and focused on the PPJ and I avoided any temptation to go back to what I was doing before just so that I could "look" better at the range. I'm pretty excited about what I saw when I got it right.  I hit the 6 iron mostly (nearly all block work today). I also hit about 6 balls each with the PW, 8I, 5W and Driver. Those had varying degrees of success. I did crack one drive that let me feel and see what the changes will look like once I get fully trained.  Anyway, I'm going to go back to the mirror work for a couple of more days before bringing it back to the range. I do feel like if I can get this right my swing will improve a lot. So I think its worth the effort. I liked the way it looked on GEARs when I get it right, and I like the results I got at the range when I got it right. Now the goal is to work towards getting it right more often. 
    • So I think it's that they can't just bend the shaft or hosel to get it to a new lie angle. They adjust that and it changes the weighting, so they have to then adjust all the weights to get it balanced again. I get the impression that it's a bit of an iterative process and they do it all in the US, so they're paying US labor costs to build it and make it work how it's supposed to. Whether you believe in the tech or not, I think that's a true statement.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...