Jump to content
IGNORED

Iron shafts


brice
Note: This thread is 3508 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I got fitted for RIP Phenom 70 x-stiff driver shaft about a month ago and have been hitting my drives much longer with a lot more control than I had before. So I decided to look into changing out the shafts in my irons as well, but I'm having a hard time figuring out what specs I need. Do you guys know any good guides online for choosing iron shafts?

Link to comment
Share on other sites


Check out the GolfWorks shaft selector. It will give you a shaft band based on swing features. From there, you would need to try out different shafts from that shaft band.

http://www.golfworks.com/article.asp?ai=202

Also, see if you can get a Deep Red Tour II demonstrator 6 iron. Then, you could try out different shafts in the demonstrator and compare it to your current 6i performance.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Link to comment
Share on other sites

Awards, Achievements, and Accolades

  • Moderator
I went to a local Mizuno fitter and used their shaft optimizer. I got the numbers from that and did some research to find out what they represent and what kind of shafts would work best for me.

Bill

“By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest.” - Confucius

My Swing Thread

Link to comment
Share on other sites

Awards, Achievements, and Accolades

I got fitted for RIP Phenom 70 x-stiff driver shaft about a month ago and have been hitting my drives much longer with a lot more control than I had before. So I decided to look into changing out the shafts in my irons as well, but I'm having a hard time figuring out what specs I need. Do you guys know any good guides online for choosing iron shafts?

What shafts do you have currently in your irons? It could be more just the clubhead than the shaft.

Matt Dougherty, P.E.
 fasdfa dfdsaf 

What's in My Bag
Driver; :pxg: 0311 Gen 5,  3-Wood: 
:titleist: 917h3 ,  Hybrid:  :titleist: 915 2-Hybrid,  Irons: Sub 70 TAIII Fordged
Wedges: :edel: (52, 56, 60),  Putter: :edel:,  Ball: :snell: MTB,  Shoe: :true_linkswear:,  Rangfinder: :leupold:
Bag: :ping:

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Use the Mizuno shaft optimizer short list as a starting point. Test out the recommended shafts in the Miz clubhead you want to buy.

Two of the three felt a bit harsh when I tested them out in the JPX-825 and JPX-825 Pro.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Use the Mizuno shaft optimizer short list as a starting point. Test out the recommended shafts in the Miz clubhead you want to buy.

This is a good idea, and the optimizer hit the nail on the head for me. It actually showed me that I needed a stiffer shaft than I thought I would need (I previously used a KBS Tour Stiff) by recommending a KBS Tour X (soft-stepped by one) which worked nicely for me.

Link to comment
Share on other sites

Awards, Achievements, and Accolades

I recently went through this trying to figure out what shafts I wanted in my irons. I was playing MP-59s w/ DG S300s but I knew I needed to go to a stiffer shaft. I did a fitting and tried a bunch of different shaft/head combos. Tried KBS Tour X, C-Taper X and S+, and Project X 6.5 and even though my numbers were still solid, none of those shafts felt right to me. I really liked the feel of Dynamic Gold so I ended up going with X100s in an MB head. I've picked up distance and improved trajectory with the new setup. For me, all of these shafts performed well but it came down to what I felt most comfortable with.

 

Link to comment
Share on other sites


Note: This thread is 3508 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...