Jump to content
Subscribe to the Spin Axis Podcast! ×
Subscribe to the Spin Axis Podcast!
IGNORED

Bending Cleveland 588 Wedges

MGN

By MGN,
in Balls, Carts/Bags, Apparel, Gear, Etc.

 Share
Note: This thread is 1930 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

MGN Established Member

MGN

If I bend my Cleveland 588 RTG 56 deg wedge to 54 degrees, is it likely to break?  

Thanks.

Driver: Taylormade M3 (9o) with Mitsubishi Tensei Blue 65 Stiff-flex shaft.  3-wood: Tour Edge Exotics CB2 (15o) with Fujikura Regular-flex

3H: Tour Edge (18o) with R-flex 80g shaft.  4H: 22o  Taylormade Rbz Stage 2 with R-flex shaft.

Irons (5-PW): Titleist 804os with True Temper reg. flex shaft.  Wedges: 50o deg Titleist SM-7 12o bounce F grind, 56o (bent to 54o) Cleveland RTG sand wedge, Cleveland RTX-3 CB 58o wedge 9o bounce.

Putter: TaylorMade Ghost Monte Carlo w/Super Stroke 2.0 grip

 


70sSanO Great Member

70sSanO

I had a Wilson C200 wedge bent from 55* to 53*.  The Wilson is a cast club and 2* Is probably the max.

I think your Cleveland wedge is forged so It should be no problem to go from 56* to 54*.

Now for the other news.  It is my understanding you will lose 2* of bounce off the wedge.  I imagine you can open it up to get loft and bounce back to original.  My wedge was cheap and it was worth the $5 to get more loft.

John

  • Thumbs Up 1
Awards, Achievements, and Accolades
1

MGN Established Member

MGN

  • Author

Good point.  So if my 56-12 is bent to 54 I should get a 54-10 deg bounce club.  That is actually what I am looking for.  Will give it a shot.

Thanks.

Driver: Taylormade M3 (9o) with Mitsubishi Tensei Blue 65 Stiff-flex shaft.  3-wood: Tour Edge Exotics CB2 (15o) with Fujikura Regular-flex

3H: Tour Edge (18o) with R-flex 80g shaft.  4H: 22o  Taylormade Rbz Stage 2 with R-flex shaft.

Irons (5-PW): Titleist 804os with True Temper reg. flex shaft.  Wedges: 50o deg Titleist SM-7 12o bounce F grind, 56o (bent to 54o) Cleveland RTG sand wedge, Cleveland RTX-3 CB 58o wedge 9o bounce.

Putter: TaylorMade Ghost Monte Carlo w/Super Stroke 2.0 grip

 


  • iacas changed the title to Bending Cleveland 588 Wedges
  • Administrator
iacas Hall of Fame Member

iacas

  • Administrator

Yeah, two degrees is normally fine for anything. Cast, forged, whatever.

Erik J. Barzeski — ⛳ I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • Author, Lowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades
1
1
1
1
1
1
1
1

Mr22putt Great Member

Mr22putt

(edited)
  On 12/4/2019 at 5:53 AM, iacas said:

Yeah, two degrees is normally fine for anything. Cast, forged, whatever.

Expand  

So if I gave you my Rocketbladez Tour A wedge and PW you'd be comfortable bending them 2 degrees stronger without breaking them?

Edited by Mr22putt

  • Administrator
iacas Hall of Fame Member

iacas

  • Administrator
  On 12/4/2019 at 10:15 PM, Mr22putt said:

So if I gave you my Rocketbladez Tour A wedge and PW you'd be comfortable bending them 2 degrees stronger without breaking them?

Expand  

Yeah.

Erik J. Barzeski — ⛳ I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • Author, Lowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades
1
1
1
1
1
1
1
1

  • Moderator
DaveP043 Incredible Member

DaveP043

  • Moderator

When we visited the Ping factory in 2015, weren't most of the clubs they were bending cast rather than forged?  They didn't seem to have any concerns.

Dave

:callaway: Rogue SubZero Driver

:titleist: 915F 15 Fairway, 816 H1 19 Hybrid, AP2 4 iron to PW, Vokey 52, 56, and 60 wedges, ProV1 balls 
:ping: G5i putter, B60 version
 :ping:Hoofer Bag, complete with Newport Cup logo
:footjoy:, :true_linkswear:, and Ashworth shoes

the only thing wrong with this car is the nut behind the wheel.

Awards, Achievements, and Accolades
1
1
1
1
1
1
1

Mr22putt Great Member

Mr22putt

  On 12/4/2019 at 10:32 PM, iacas said:

Yeah.

Expand  

I've also PM'd two golf fitter/repair guys on other forums and said they could bent but no guarantees.

I have asked a couple of guys here and both said they would not bend them unless I signed a waiver.

I just don't want to chance a break...it would limit my opportunity to flip them when the time comes.


  • 2 weeks later...
MGN Established Member

MGN

  • Author

Just a follow-up; the bending from 56 to 54 worked.  Took 2 minutes at Golf Galaxy and $5 for the job.

  • Like 1

Driver: Taylormade M3 (9o) with Mitsubishi Tensei Blue 65 Stiff-flex shaft.  3-wood: Tour Edge Exotics CB2 (15o) with Fujikura Regular-flex

3H: Tour Edge (18o) with R-flex 80g shaft.  4H: 22o  Taylormade Rbz Stage 2 with R-flex shaft.

Irons (5-PW): Titleist 804os with True Temper reg. flex shaft.  Wedges: 50o deg Titleist SM-7 12o bounce F grind, 56o (bent to 54o) Cleveland RTG sand wedge, Cleveland RTX-3 CB 58o wedge 9o bounce.

Putter: TaylorMade Ghost Monte Carlo w/Super Stroke 2.0 grip

 


Note: This thread is 1930 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    TourStriker
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • Hardspoon
      2025 TST Outing Preliminary Blabber

      By Hardspoon ·

      So far, it's looking pretty even.  The first weekend (the one in May) is probably out, but the others all seem to work in general.  I'll give it until the end of a week for votes and then pick one.
    • iacas
      "5 Minutes Daily" Practice Challenge

      By iacas ·

      Day 181 - 2025-03-30 Got a little work in while the kids were playing their final round(s). Then drove for awhile. I-95 sucks.
    • Clemsonfan
      "5 Minutes Daily" Practice Challenge

      By Clemsonfan ·

      Day 8: 3/30/25 After some poor putting yesterday I worked on some distance control drills today along with putting through 50 mm gates.
    • cdh79
      Code of Conduct Not Entered as Local Rule - Still Valid?

      By cdh79 ·

      So I am aware that "the committee is allowed to set its own standards of player conduct in a code of conduct adopted as a local rule" (rule 1.2b) I also understand that there are some aspects that are allowed to be entered, and some that are not allowed.  My question specifically is: In which form does this code of conduct need to be available? Is it enough for someone to say "that's part of our code of conduct", or is it a requirement, that the code of conduct is in written form? Also, is there a need that the local rule points to the code of conduct in any way?   For better understanding: I'm playing competition and the next course that we play has a "no smoking policy". I don't have a problem with it, as I don't smoke anyway, but one of my team-mates does, and someone told him "You'll get disqualified if you smoke on the course".   Now I have looked at their local rules and there is no reference to a "code of conduct". I'm not sure if they even have an official "code of conduct" that states that smoking is not allowed.   I fully agree that he SHOULD respect this request from the club, but I am wondering if the club would really be allowed to DQ this player for this, if it's not properly documented in their local rules/code of conduct?  This is an official national amateur tournament, so not just something organized by a club for its members.
    • MiuraMan
      My Journey to Straighter Iron Shots

      By MiuraMan ·

      A few months back I purchased the following swing aid on Amazon ($130). It is solidly made of steel and heavy and stable in use. I use it both at the range and at home. Swing Plate Dual PRO by Jamie Brittain - Swing Analyzer Aid - Fits Standard 8mm Alignment Rod Sticks - Teaching Swing Plane Perfector - Indoor/Outdoor Golfing Practice. This winter I set a goal for myself to improve my backswing/downswing to be more consistent and on plane. I had a two way miss with my approach shots this past golf season. I have a hitting set-up in my garage, but I needed something to provide feedback while swinging the club. I came across the Swing Plate while browsing YouTube.   I set it up with the correct angles for my 8 iron. I started out with just the back rod in place, which prevents me from getting too far inside on the backswing. Started out slow and as I got comfortable increased my swing speed. Now I also came across a YouTube video on building a better backswing and getting more width in the backswing and added that to my practice. That video is here:    This video is a bit wordy since you are basically a fly on the wall as Ian gets a lesson. It took a few replays to be able to get the substance of the instruction. It was well worth the effort. Over the last two weeks I have been able to get out on the course and gauge how successful my practice has been. Overall, my consistency with approach shots has improved greatly. Incorporating the added width in my swing has also added a few yards to all my clubs.  What has your off-season training been like?
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept

Join us here in The Sand Trap!

Registration is free and takes almost no time. You'll see one fewer ad per page and be ready to jump in and contribute your thoughts to any subject!

Click here to register (registration will open in a new page so you can continue to read what you came to read).

The popup will be closed in 10 seconds...