Jump to content
IGNORED

Shaft Identification


joraidu
Note: This thread is 805 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Good morning

Is there somebody who can help me

I'm looking to identify a steel taper iron shaft

All what i know is few letters and numbers i found when i removed the # 5 iron grip

It's written   BDZJ14  38  50'' and probably some others are missing because the shaft have been cut

Thanks to try to help me

Link to comment
Share on other sites


22 hours ago, joraidu said:

Good morning

Is there somebody who can help me

I'm looking to identify a steel taper iron shaft

All what i know is few letters and numbers i found when i removed the # 5 iron grip

It's written   BDZJ14  38  50'' and probably some others are missing because the shaft have been cut

Thanks to try to help me

Hi there. We’re gonna need a picture and probably some more information to help. Where did you get this shaft? Any history? What is that you’re wanting to identify about it? 

  • Thumbs Up 1

:ping: G25 Driver Stiff :ping: G20 3W, 5W :ping: S55 4-W (aerotech steel fiber 110g shafts) :ping: Tour Wedges 50*, 54*, 58* :nike: Method Putter Floating clubs: :edel: 54* trapper wedge

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Good morning Vinsk

I'm so happy to receive an anwer, i will try to explain the situation.

I bought a set of Ping eye 2 beryllium copper and i want to sell it, but the buyers are asking what kind of shafts are on it.

There is no label and i'm not the original owner. Also there is no serial # on the hosel. So i call Ping and try to explain with the steps , they ask me to remove a grip and look on the shaft if there is letters or numbers and i found BDZJ14 38 50''. They can't identify the shaft.

I also ask Golfworks, but nobody know. So i decided to ask here, maybe somebody can help. Hope it's you HaHa.

I included a picture with the steps. Thank you so much to try to help me.

Sorry for my bad English, i'm a french Canadian!

tige ping eye 2.JPG

Link to comment
Share on other sites


  • Moderator
3 minutes ago, joraidu said:

Good morning Vinsk

I'm so happy to receive an anwer, i will try to explain the situation.

I bought a set of Ping eye 2 beryllium copper and i want to sell it, but the buyers are asking what kind of shafts are on it.

There is no label and i'm not the original owner. Also there is no serial # on the hosel. So i call Ping and try to explain with the steps , they ask me to remove a grip and look on the shaft if there is letters or numbers and i found BDZJ14 38 50''. They can't identify the shaft.

I also ask Golfworks, but nobody know. So i decided to ask here, maybe somebody can help. Hope it's you HaHa.

I included a picture with the steps. Thank you so much to try to help me.

Sorry for my bad English, i'm a french Canadian!

tige ping eye 2.JPG

Bienvenue to The Sand Trap! If Ping and Golfworks don’t know, then it may be hard to ID. Are the step rings painted or a decal?

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Bonjour Bougielicious

In fact because i have trouble to take a good picture , i take a black marker to show all the steps, then it's easier to have a better look

Thank you also for your answer.

Maybe a clubmaker here have the same shaft and know what kind it is

I'm happy to be a new member of the Sand trap forum.

Link to comment
Share on other sites


23 hours ago, joraidu said:

Good morning

Is there somebody who can help me

I'm looking to identify a steel taper iron shaft

All what i know is few letters and numbers i found when i removed the # 5 iron grip

It's written   BDZJ14  38  50'' and probably some others are missing because the shaft have been cut

Thanks to try to help me

I don't know about your particular set. However, PING Eye-2 coppers usually came with Ping ZZ lite shafts. 

Those were "usually" the stock steel shaft. 

The ZZ lite was slightly lighter, had a stiff tip, and had a pretty high kick point. At least relative to what was out at the time. 

I'd suggest just telling the buyer everything you do know. Then see if he/she is still interested. BTW - What kind of condition are they in? Pictures? 

If they are in good condition there should be multiple buyers, so if this one is very fussy, you could move on. Those are pretty iconic clubs. 

  • Thumbs Up 1

My bag is an ever-changing combination of clubs. 

A mix I am forever tinkering with. 

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Note: This thread is 805 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...