Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 1399 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

A follow up from another question. When playing "winter rules" what is the standard for "lift and clean"?  I generally ignore and play as it lies unless I am imbedded. We are not posting during the worst conditions so it is a learning experience IMO.  Comments??


  • Moderator
Posted

Winter is a perfect time to see what actually happens to a ball with mud on it. It won’t affect your HC. Experiment!

  • Like 1

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Awards, Achievements, and Accolades

  • Moderator
Posted

If the score doesn’t count, you don’t have to play by the rules.

  • Thumbs Up 1

Bill

“By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest.” - Confucius

My Swing Thread

Awards, Achievements, and Accolades

Posted

Winter rules are whatever you and your partners decide they are.

Normally, my guys will roll the ball after the season is over. Barring something freakish, we generally keep the ball within a foot or so of where it landed.

Playing in the Ohio winter mud requires a fairly liberal approach to such things.

Awards, Achievements, and Accolades

Posted

I think the general rule is that if the ball lands on a closely mown area, you're allowed to pick it up and clean it and the place it within about a scorecard-length (no closer to the pin) of where it was..  so not when you end up in the rough or a hazard..

with embedded balls you're allowed to take them out of their own plug, and then drop them within a stick-length of where it was embedded (even when in the rough)

cheers Chris

Awards, Achievements, and Accolades

Posted
13 hours ago, KMP said:

A follow up from another question. When playing "winter rules" what is the standard for "lift and clean"?  I generally ignore and play as it lies unless I am imbedded. We are not posting during the worst conditions so it is a learning experience IMO.  Comments??

Model Local Rule E-2 Cleaning Ball

“When a player’s ball lies in [identify area, such as the general area, at the 6th hole, in the general area cut to fairway height or less, etc.], the ball may be lifted cleaned and replaced without penalty. The player must mark the spot before lifting the ball (see Rule 14.1) and the ball must be replaced on its original spot (see Rule 14.2).

Winter Rules

Model Local Rule E-3 Preferred Lies 

“When a player’s ball lies in a part of the general area cut to fairway height or less [or identify a specific area such as ‘on the fairway of the 6th hole’], the player may take free relief once by placing the original ball or another ball in and playing it from this relief area:

  • Reference Point: Spot of the original ball.

  • Size of Relief Area Measured from Reference Point: [Specify size of relief area, such as one club-length, one scorecard length or 6 inches] from the reference point, but with these limits:

  • Limits on Location of Relief Area:

    • Must not be nearer the hole than the reference point, and

    • Must be in the general area.

In proceeding under this Local Rule, the player must choose a spot to place the ball and use the procedures for replacing a ball under Rules 14.2b(2) and 14.2e.

 

  • Upvote 1
  • Informative 1

Note: This thread is 1399 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 47: simulator day! Played St. Andrew’s and shot a +1. Not bad, especially with having to putt at this simulator set up. Had about 5 minutes at the end to work on some feels as well. 
    • I think you're saying it's preposterous to think that the areas on this club are anything like what's shown here: 30mm toward the toe or heel loses only 5% distance? Highly, highly doubtful. So a guy who hits the ball there and normally hits the ball about 250… will hit it instead about 238. By missing the sweet spot by about 1.2 inches? Highly, highly doubtful. Heck, the high heel barely gets into the red, and orange is only "up to" 10%! @M2R, I've never heard of "Ask Golf Nut" but I'm dubious of his claims in the video and really, really dubious of what's on his site: "Why AskGolfNut Is the Most Trusted Data-Driven Golf Resource". Hmmmmmm.
    • Day 151 1-11 flow work today. I've been doing all pause work, so Inwanted to get some rhythm going. Recorded.
    • a) No b) This MLR says: I doubt the MLR is going to affect their weekly league games, in other words.
    • So the question was posed today by some of my friends.  Is a pitch mark the same as a divot?  I thought NO, but they argued if your ball lands in another player's divot (made by club during a swing) this was the same as a pitch mark, i.e. the ball mark made when the ball lands  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.