Jump to content
Check out the Spin Axis Podcast! ×
IGNORED

how often do you really clean your clubs


Note: This thread is 5493 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
how often do you really clean your clubs and how do you do it?

i hardly ever clean my clubs aside from after playing a shot... brushing it down... then wiping it off with my bag towel... all during the course of play

ill only really really clean them after playing in the rain or mud... bring them in the house... a basin of warm soapy water... a scrub brush... and a dry towel... but its rare
RUSS's avg drive - 230yrds and climbing

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Posted
how often do you really clean your clubs and how do you do it?

In season, i probly clean my clubs every other round, i like to keep them clean but an too lazy to do it after every round. Its clucial to keep the wedges clean though, so i clean them the most.


Posted
Just when I have time usually on sunday nights lol btw I just use water and an old toothbrush then sometimes i come back with some polishing compound and clean the shaft and head good, just to keep them in as good condition as I can
Driver Tit 907D2 9.5 aldila spec grid 67s
HybidTit 585H 19* s flex
IronsTit 775cb 3-pw
WedgesTit vokey 52* 56* 60*
Putter Rife Barbados 35" winn mid pistol gripGolfballBridgestone B330-s/taylormade tp black/titleist prov1x

Posted
Ironically I just did it like an hour ago. But I'll clean them after practice and after a round.

i wish i had to clean mine, in boston we just got a snow storm today, around 8 inches.


Posted
Clean them after every shot. Keep one towel wet and one dry. Then after every two rounds, bring them into the house for a good scrubbing.
Driver 983k 9.5°
3 Wood 906f2 15°
5 wood 906f2 18°
Irons 735 3-pw S300, Golf Pride Tour Velvet cord
Wedges Spin Milled 53°, Spin Milled 59°Putter Studio Select Newport 2Goals for '10:1. Get down to scratch or better

Posted
I clean mine after every round. I use a club brush and warm water. I make sure not to use the side that has the brass bristles on my forged clubs though.

Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S


Posted
I thoroughly clean mine a day or so after a round. I'm too tired after 18 to whip them all out and scrub them down.

During play though, I take my brush and towel and wipe them down after a shot.

- Tour Issue Taylormade R7 Superquad TP Matrix Ozik Xcon 5 X-stiff
- Nike Dymo 3 Wood UST Axivcore Stiff
- Nike Dymo 5 Wood UST Axivcore Stiff- Nike Blades 3-PW S300- Nike SV Tour 50* 54* 58* S400- Titleist Scotty Cameron Newport Beach- Nike Tour D


Posted
Clean mine after every shot, every round, every practice session. The grooves are never filled with dirt. Use the high pressure hose in the sink with hot water and a sponge.

In the bag:

Irons X20 5-SW
Hybrids Slingshot 20* and 23*
Fairway Wood SasQuatch 15* Rescue:18* Perfect Plus (Don't laugh! I fairway people to death with that thing!)Putter Dual Force 550 Proudly, I hit no Driver. Who needs it?


Posted
After each shot. Got one of these scrubber brushes and a wet towel with me always. Can't have dirty grooves.

Callaway RazrFit Extreme 9.5 w/Project X 6.5
Callaway XHot Pro 15* 3Wood w/Project X 6.5
Callaway XTour 18* 2h w/S300
Callaway XHot Pro 4/5 irons w/S300
Callaway XForged III 5-PW irons w/S300
Callaway Forged 52*/58* Wedges
Odyssey 7 Versa 90
Callaway Hex Black Tour


Posted
Why the X-20 3 Iron only?

In the bag:

Irons X20 5-SW
Hybrids Slingshot 20* and 23*
Fairway Wood SasQuatch 15* Rescue:18* Perfect Plus (Don't laugh! I fairway people to death with that thing!)Putter Dual Force 550 Proudly, I hit no Driver. Who needs it?


Posted
I usually clean mine after every shot if it is necessary and for sure after every round.

In my Xtreme Sport bag
'09 Burner 9.5*
F50 15* 3 Wood
Burner 18* 5 Wood
MX-19 4-GW SV Tour 54.12 & 58.08 White Hot 2-Ball SRT


Posted
Why the X-20 3 Iron only?

Don't want another hybrid in my bag, want something a little easier to hit than the XForged. My friends call it my "cheater club." I've got an X22 Tour 3 iron on order for this season.

Callaway RazrFit Extreme 9.5 w/Project X 6.5
Callaway XHot Pro 15* 3Wood w/Project X 6.5
Callaway XTour 18* 2h w/S300
Callaway XHot Pro 4/5 irons w/S300
Callaway XForged III 5-PW irons w/S300
Callaway Forged 52*/58* Wedges
Odyssey 7 Versa 90
Callaway Hex Black Tour


Posted
how often do you really clean your clubs and how do you do it?

I clean them after every shot. Because of that I rarely have to make a point of cleaning them at home.

Rick

"He who has the fastest cart will never have a bad lie."

Awards, Achievements, and Accolades

Posted
I am like BEN. I have a scrubber brush on my bag and my clubs get a good cleaning after/before every shot. I try and wash my grips at least once a week. Soap filled sink with lots of suds for the grips. I don't use a glove and they get pretty slick if I don't stay on top of them.

My golfing buddy (and bff ;)) never cleans his clubs, and I have not idea how he plays with dirty clubs. I don't know if it's the OCD in me or not, but I can't stand dirty clubs.

|Callaway I-MIX FT-9  - Driver | Callaway Diablo Octane - 3 Wood | Callaway Diablo Edge Tour [3H & 4H] - Hybrids | Callaway X-forged 2009 - Irons | Callaway JAWS [52, 56, 60] - Wedges | SC Studio Style Newport 2 / Laguna 1.5 / Kombi-S - Putter |
 


Posted

I clean my irons after every shot, make sure the grooves are clean. Driver and woods/hybrids only if I hit a shot where they got splattered. I usually do a thorough cleaning once a month, where I wash the entire club, clean the grips really well with hot soapy water, and rub the shafts and the woods/hybrids/driver faces down with rubbing alcohol. Usually go through my bag and clean out any clutter that may have accumulated there as well. Gotta take care of the equipment, costs too much not to.

Next time they give you all that civic bullshit about voting, keep in mind that Hitler was elected in a full, free democratic election- George Carlin


In the Hoofer bag:
10.5* Redline RPM G5 16* G5 19* G5 22* MX 200, 4-6, MP-52 7-W Vokey 50*, Vokey SM 54*, 58* G5i flatstick IGNITE ball

Posted
I do a rough cleaning as I go on the course (not necessarily after every shot). That would be a dip in the club cleaner on the cart and a wipe from the towel. I do a thorough cleaning with warm water and dish detergent after every round and range session. I always use the nylon side of the brush and never ever use the brass side.

Note: This thread is 5493 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 470 - 2026-01-13 Got some work in while some players were using the sim, so I had to stick around. 🙂 Good thing too, since… I hadn't yet practiced today until about 6:45 tonight. 😛 
    • That's not quite the same thing as what some people messaged me today.
    • Day 152 1-12 More reps bowing wrists in downswing. Still pausing at the top. Making sure to get to lead side and getting the ball to go left. Slow progress is better than no progress.  
    • Yea, if I were to make a post arguing against the heat map concept, citing some recent robot testing would be my first point. The heat map concept is what I find interesting, more on that below. The robot testing I have looked at, including the one you linked, do discreet point testing then provide that discrete data in various forms. Which as you said is old as the hills, if you know of any other heat map concept type testing, I would be interested in links to that though! No, and I did say in my first post "if this heat map data is valid and reliable" meaning I have my reservations as well. Heck beyond reservations. I have some fairly strong suspicions there are flaws. But all I have are hunches and guesses, if anyone has data to share, I would be interested to see it.  My background is I quit golfing about 9 years ago and have been toying with the idea of returning. So far that has been limited to a dozen range sessions in late Summer through Fall when the range closed. Then primarily hitting foam balls indoors using a swing speed monitor as feedback. Between the range closing and the snow flying I did buy an R10 and hit a few balls into a backyard net. The heat map concept is a graphical representation of efficiency (smash factor) loss mapped onto the face of the club. As I understand it to make the representation agnostic to swing speed or other golfer specific swing characteristics. It is more a graphical tool not a data tool. The areas are labeled numerically in discrete 1% increments while the raw data is changing at ~0.0017%/mm and these changes are represented as subtle changes in color across those discrete areas. The only data we care about in terms of the heat map is the 1.3 to 1.24 SF loss and where was the strike location on the face - 16mm heal and 5mm low. From the video the SF loss is 4.6% looking up 16mm heal and 5mm low on the heat map it is on the edge of where the map changes from 3% loss to 4%. For that data point in the video, 16mm heal, 5mm low, 71.3 mph swing speed (reference was 71.4 mph), the distance loss was 7.2% or 9 yards, 125 reference distance down to 116. However, distance loss is not part of a heat map discussion. Distance loss will be specific to the golfers swing characteristics not the club. What I was trying to convey was that I do not have enough information to determine good or bad. Are the two systems referencing strike location the same? How accurate are the two systems in measuring even if they are referencing from the same location? What variation might have been introduced by the club delivery on the shot I picked vs the reference set of shots? However, based on the data I do have and making some assumptions and guesses the results seem ok, within reason, a good place to start from and possibly refine. I do not see what is wrong with 70mph 7 iron, although that is one of my other areas of questioning. The title of the video has slow swing speed in all caps, and it seems like the videos I watch define 7i slow, medium, and fast as 70, 80, and 90. The whole question of mid iron swing speed and the implications for a players game and equipment choices is of interest to me as (according to my swing speed meter) over my ~decade break I lost 30mph swing speed on mine.
    • Maxfli, Maltby, Golfworks, all under the Dicks/Golf Galaxy umbrella... it's all a bit confounding. Looking at the pictures, they all look very, very similar in their design. I suspect they're the same club, manufactured in the same factory in China, just with different badging.  The whacky pricing structure has soured me, so I'll just cool my heels a bit. The new Mizuno's will be available to test very soon. I'm in no rush.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.