Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5897 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

0  

  1. 1. Shaft choice, PLEASE POST WHY YOU WOULD CHOOSE THIS

    • Fubuki 60 by Mitsubishi Rayon
      3
    • Zcom 60 T-45 by Fujikura
      0
    • Tour AD YSQ 65g 350
      0
    • Fubuki 63 x5ct by Mitsubishi Rayon
      2
    • Zcom Pro65 T35 by Fujikura
      1
    • ProForce V2 67g
      15


Recommended Posts

Posted
if you could have any one of these shafts, what would you choose AND WHY?

Fubuki 60 by Mitsubishi Rayon
Zcom 60 T-45 by Fujikura
Tour AD YSQ 65g 350
Fubuki 63 x5ct by Mitsubishi Rayon
Zcom Pro65 T35 by Fujikura
ProForce V2 67g

:cobra: Speed ld-f 10.5 Stiff
:snake_eyes: 3 & 5 Woods
:adams:A4 3 hybrid
:bridgestone: J33 Forged Irons 4-pw
:ping: 50th Aniv. Karsten Ansr Putter56*, 60* wedges


Posted
none of the above sorry dont care for them

okay, but for instance if those were the only shafts on the earth and you had to have one in your driver, what would you choose, and why if you could explain.

:cobra: Speed ld-f 10.5 Stiff
:snake_eyes: 3 & 5 Woods
:adams:A4 3 hybrid
:bridgestone: J33 Forged Irons 4-pw
:ping: 50th Aniv. Karsten Ansr Putter56*, 60* wedges


Posted
okay, but for instance if those were the only shafts on the earth and you had to have one in your driver, what would you choose, and why if you could explain.

v2 its a good shaft and i like heavy shafts.


Posted
v2 its a good shaft and i like heavy shafts.

thats what i was kind of leaning towards myself..

but keep the opinions coming please.

:cobra: Speed ld-f 10.5 Stiff
:snake_eyes: 3 & 5 Woods
:adams:A4 3 hybrid
:bridgestone: J33 Forged Irons 4-pw
:ping: 50th Aniv. Karsten Ansr Putter56*, 60* wedges


Posted
I didn't vote. I have no idea. Whatever shaft a fitter says will give me the best launch conditions. I am partial to UST but never played a v2. I think for the money there isn't a better shaft.

Brian


Posted
the v2 fits my swing. i hit the ball too high with the stock 909D shafts and the V2 launched a little lower than the Aldila Vodoo. Piercing ballflight with plenty of distance.

Posted
The Fubukis are out of My league price wise, the YSQ was a noodle in a stiff flex IMO and I'm not a big fan of the V2, BUT I found that I liked the 76g version of the V2 alot more than the one you have listed.

:tmade: R15 14* Matrix Black Tie 7m3

:adams: Speedline Super S 3w & 5w Matrix Radix HD S VI

:callaway: X-12 4-PW Memphis 10

IONNOVEX  Type S GDT 50*, 54* & 62* Mitsubishi Rayon Kuro Kage Black 80ir

:odyssey: Tri-Ball SRT

-Landon


Posted
v2 for sure. Best shaft for the money. A very stable shaft for the bigger head drivers. Can't go wrong with a v2.
In my Vantage bag:
Driver::905R 8.5*(V2)
3 Wood:Launcher 13*(V2)
Irons:AP2 (Project X 5.5) (3-W)
HybridTWS 19*Gap wedge:CG15 50* Sand wedge:CG15 56*Putter:: XG9 (35")Ball:ProV1X

Posted
V2 for me as it suites my swing.

From driver to hybrids .

I can tee it high or low , the ball flight is very penetrating with low spin .
What I Play:
913D3 9.5°Diamana Kai'li 70 Stiff  "C3" | 910F 15°, Diamana Kai'li 80 Stiff "D2" | 910H 19°,  Diamana Kai'li for Titleist 85 Hybrid Stiff | Titleist 714 AP2 4 to P Aerotech Steelfiber i110 S | SM4 Vokey 50.12, 54.14 & SM5 60.11K| 34" Edel Umpqua + 40g Counter Weight
 

Posted
Of those you mentioned, the V2 would be my choice but I'd want a lighter version.


Sent from my iPhone using Tapatalk
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
V2 for sure, but I have the 76g version. Torque in the low 2's

:callaway: BB Alpha 815 DBD 10.5* Rogue Silver 60 :callaway: x2hot 3deep 14.5* (TBD) :tmade: RSI UDI 20* RIP Tour 90 :bridgestone: J40CB 4-PW Steelfiber i95 :vokey: SM4 50* KBS Tour V :vokey: SM5 54* KBS 610 :vokey: SM5 58* KBS HI-REV 2.0 MannKrafted Handmade Custom


Posted
V2,... I already have two clubs with this shaft. I like it. It is stiff enough for me to be able to get distance with control.

It ain't bragging if you can do it.
 
Taylor Made Burner '09 8.5* UST Pro Force V2, Mizuno F-60 3 wood UST Pro Force V2, Mizuno MP-68 3-PW  S300, Bobby Jones Wedges S and L, Nike Ignite 001, Leupold GX-II


Posted
V2 - just put them in my hybrids and they are fantastic.h

Driver:Taylormade Burner 10.5 with Aldila NV 65S
FW Wood: Nike Dymo 3 Wood with Aldila VooDoo
Hybrids: Adams Idea A7 3 Hybrid
Irons: Ping i15 4-P
Wedge: Cleveland CG15 52.10 and Titleist Vokey 58.12Putter: Bettinardi BC3Ball: Callaway Tour i(z) and Titleist Pro V1x


  • 2 months later...
Posted
The only one I've tried is the V2, and I don't care for it at all. Alot of pros use it though.

What's in my Sun Mountain C-130 bag:

Driver - Taylormade Superfast 2.0 TP 10.5
3 Wood - Taylormade Burner 15* REAX
Hybrid - Adams Idea Pro 18* GD YSQ-HL

Irons - Callaway X-18 4-PW

GW - Cleveland 588 51*

SW - Cleveland CG 12 56*

LW - Cleveland CG15 60*

Putter - Cameron Studio Style Newport 2

Bushnell Medalist rangefinder


Posted
V2 out of those that are listed, I have 1 in my 3 wood and it is great
If you always do what you've always done....You'll always be where you are right now..
Driver: C830.2 HOF Taiwan Proto
3 wood: Versus VS 1 Proforce V2
7 wood: DCT Fujikura Motore F1
3-pw: Nakashima NX-1 Project X 6.5 53*: ...

Note: This thread is 5897 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 254 5-4 Arms off chest in backswing and downswing. Short swing, pause and then hit.  Hit foam balls. Keeping arching of wrist a focus as well. 
    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.