Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5862 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I am a mid to high handicapper with hcp of 20. I'm in the market for a new set of irons and would like something extremely forgiving so that i don't have to worry a whole lot of things on the course about my swing and can spend more time enjoying the game.

I have basically narrowed it down to these few particular brands and model: Ping G10, Cobra S2, TM burner.

What i need is forgiveness not only in easy launching the ball, but equally important is to launch it in the right direction. I don't mind losing some distance for mishit but the direction and straightness is important.

Any suggestions are more then welcome.

Posted
I am a mid to high handicapper with hcp of 20. I'm in the market for a new set of irons and would like something extremely forgiving so that i don't have to worry a whole lot of things on the course about my swing and can spend more time enjoying the game.

of the three menioned id go ping they make good g.i irons

Posted
I tried the G10 and the Mizuno MX-100s. I thought the Mizuno's were the easiest to hit iron's I have ever tried.

Driver...Ping G10 10.5* V2 High Launch

4-wood......Bobby Jones by Jesse Ortiz 2012 17*
3-4 Hybrid.......Bobby Jones Player Series 21* and 25*
Irons.........Mizuno MX-200
Wedges....Titleist Vokey Spin Milled 52*, Ping Tour-W 56*, Ping Tour-S 60*....Putter-Ping Redwood Piper.....Ball-Srixon TriSpeed Tour


Posted
Out of those 3 I would say the Ping G10's.
You can find a new set of Callaway Big Berthas from 06 or even the bigger 08 model. They are both super forgiving and easy to hit.

In my Xtreme Sport bag
'09 Burner 9.5*
F50 15* 3 Wood
Burner 18* 5 Wood
MX-19 4-GW SV Tour 54.12 & 58.08 White Hot 2-Ball SRT


Posted
What i need is forgiveness not only in easy launching the ball, but equally important is to launch it in the right direction. I don't mind losing some distance for mishit but the direction and straightness is important.

I just bought a set of Ping G5 irons (very similar to G10 and cheaper), and I think they offer what you're looking for. They really help you get the ball in the air, and the direction is very forgiving. For example, if I hit one thin (which I'm doing too often lately) the G5s still get the ball up in the air, on target, and an acceptable distance.

Graphite shafts are more expensive, but I think they offer an even more forgiving feel. I got steel shafts because they're cheaper and I prefer the weight.

Callaway Big Bertha 460
Callaway X 3-wood 15*
Adams Idea Tech hybrid 19*
Titleist DCI 981 irons
Ping iwedge 56*, 52*Carbite Putter


Posted
I would definitely trust the TM burner irons out of those three. Also, if i were you I may also want to consider Callaway Big Bertha irons. Which are similar to the burners but I believe even more forgiving.

_________________________________________
What Iâm Playing:
Driver: Titleist 983K 10.5* (with a cracked face) and TM r5 dual
Fairway woods: Cally Steelheads 3, 5
Hybrid: Snake Eyes 5 and Texan 2Irons: Cally X-12s (yes the original x-series) 5-PWWedge: Jack Nickalaus 56, TM Rac 60, Carbite 64Pu...


Posted
If your looking for forgiveness I would go with the Pings.

In my Bag
Driver-Taylormade R11 TP Fujikura Blur Stiff 65g shaft
3Wood- Titleist 906 f4
Hybrid- Adams  Idea Pro A12 18degree
Irons- Titleist 712 mbs 3-Pw

Wedges Clevland CG 12 52 56, CG 15 60

Putter- Scotty Cameron Newport 2.6


Posted
What i need is forgiveness not only in easy launching the ball, but equa...

Similar experience here. The G series are easy gamers. The AWT steel shafts get the ball up nicely.

Not a thing in the world wrong with the other irons you listed, either.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
As already said the Callaway Fusion Wide Soles are the way to go if you want forgiveness.

Out of those 3 I'd pick the G10's but you might want to try out the G15's if you want a little more forgiveness.

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
If you have the money go for the Ping G10's or Big Bertha's. A cheaper alternative not mentioned yet are Nickent 3DX RC and DC sets, which are very affordable right now and forgiving. I picked up my set of RC's for $100 of ebay (legit) and am very happy with the forgiveness and distance it provides.
Awards, Achievements, and Accolades

  • Moderator
Posted
I just bought a set of Ping G5 irons (very similar to G10 and cheaper), and I think they offer what you're looking for. They really help you get the ball in the air, and the direction is very forgiving. For example, if I hit one thin (which I'm doing too often lately) the G5s still get the ball up in the air, on target, and an acceptable distance.

i totally agree - i have G5's and love them...liked them better than the Mizuno's

Driver: :callaway: Rogue ST  /  Woods: :tmade: Stealth 5W / Hybrid: :tmade: Stealth 25* / Irons: :ping: i500’s /  Wedges: :edel: 54*, 58*; Putter: :scotty_cameron: Futura 5  Ball: image.png Vero X1

 

 -Jonny

Awards, Achievements, and Accolades

Posted
I am a mid to high handicapper with hcp of 20. I'm in the market for a new set of irons and would like something extremely forgiving so that i don't have to worry a whole lot of things on the course about my swing and can spend more time enjoying the game.

I'm a Mizuno fan, so I'd suggest trying some of Mizuno offerings in the MX series. With that said, go with whatever irons you hit the best. I think that it is also important that the club s/u good to your eye.


Posted
If your looking for forgiveness I would go with the Pings.

i too would go with the pings for their outstanding forgiveness. however i am not huge on the feel of pings. to me they felt kind of hard like i was hitting with rocks. if you are looking for a better feel i would go with the TM burners. the pings however take the cake for forgiveness.

In my Diablo Edge Tour/ Titliest Stand Bag:
Driver: Nike VR Pro 8.5* w/ Myazaki 43g X
3 Wood: Nike VR Pro II 13.5* w/ Diamana Whiteboard 83g X
5 Wood: Cobra S9-1 Pro 18* w/ Diamana Whiteboard 83g X

Hybrid: Mizuno MP Fli-Hi 21* w/ Prolaunch Red X
Irons: 4-7 Titleist 712 CB, 8-9 712 MB w/ TT Dynamic Gold X100

Wedges: 46* Vokey SM4, 54* Vokey SM4, 60* TMade ATV

Putter: Scotty Cameron Newport 2 Belly 43"


Posted
COBRA, COBRA, COBRA, COBRA...great clubs and very forgiving. They feel like pure butter when you hit them and compared to a lot of other irons have a very reasonable price tag. Go with the S2s and you will not be sorry...I just bought the forged version and it's the best money I've ever spent on a golf related item.

What's in my TaylorMade stand bag:
taylormade.gifSuperfast TP 10.5° Matrix HD6 graphite stiff shaft
nike.gifSasQuatch 2 Steel #3 Wood: 15° Diamana SasQuatch Graphite
cobra.gifBaffler DWS Hybrid Utility Woods: 3/R 20°
cobra.gifS2 Forged irons 4-PW stiff flex steel shaftcleveland.gifCG15 satin chrome 48° gap wedge 8 bouncemizuno.gifMP T Series chrome 53° sand...cleveland.gifnike.gifbridgestone.giftaylormade.gif


Posted
You can't go wrong with either of the 3 you suggested nor the Cally Big Bertha or Fusions, but the Ping G10s may well last you a lifetime. If you check the review section at golfwrx, even single digit h'cappers are playing the G10s.

Driver: TaylorMade RocketBallz 10.5-deg
Woods: Cobra Bio Cell+ 3W and 5W
Hybrids: Bobby Jones Workshop Hybrid 3 (20-deg) and 5 (25-deg)
Irons: Srixon XXIO7 from 6 - PW
Wedge: Srixon XXIO7 GW and SW

Putter: Bobby Grace DCT Captiva 34"; Ball: Sirxon Soft Feel; Shoes: Footjoy


Note: This thread is 5862 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 470 - 2026-01-13 Got some work in while some players were using the sim, so I had to stick around. 🙂 Good thing too, since… I hadn't yet practiced today until about 6:45 tonight. 😛 
    • That's not quite the same thing as what some people messaged me today.
    • Day 152 1-12 More reps bowing wrists in downswing. Still pausing at the top. Making sure to get to lead side and getting the ball to go left. Slow progress is better than no progress.  
    • Yea, if I were to make a post arguing against the heat map concept, citing some recent robot testing would be my first point. The heat map concept is what I find interesting, more on that below. The robot testing I have looked at, including the one you linked, do discreet point testing then provide that discrete data in various forms. Which as you said is old as the hills, if you know of any other heat map concept type testing, I would be interested in links to that though! No, and I did say in my first post "if this heat map data is valid and reliable" meaning I have my reservations as well. Heck beyond reservations. I have some fairly strong suspicions there are flaws. But all I have are hunches and guesses, if anyone has data to share, I would be interested to see it.  My background is I quit golfing about 9 years ago and have been toying with the idea of returning. So far that has been limited to a dozen range sessions in late Summer through Fall when the range closed. Then primarily hitting foam balls indoors using a swing speed monitor as feedback. Between the range closing and the snow flying I did buy an R10 and hit a few balls into a backyard net. The heat map concept is a graphical representation of efficiency (smash factor) loss mapped onto the face of the club. As I understand it to make the representation agnostic to swing speed or other golfer specific swing characteristics. It is more a graphical tool not a data tool. The areas are labeled numerically in discrete 1% increments while the raw data is changing at ~0.0017%/mm and these changes are represented as subtle changes in color across those discrete areas. The only data we care about in terms of the heat map is the 1.3 to 1.24 SF loss and where was the strike location on the face - 16mm heal and 5mm low. From the video the SF loss is 4.6% looking up 16mm heal and 5mm low on the heat map it is on the edge of where the map changes from 3% loss to 4%. For that data point in the video, 16mm heal, 5mm low, 71.3 mph swing speed (reference was 71.4 mph), the distance loss was 7.2% or 9 yards, 125 reference distance down to 116. However, distance loss is not part of a heat map discussion. Distance loss will be specific to the golfers swing characteristics not the club. What I was trying to convey was that I do not have enough information to determine good or bad. Are the two systems referencing strike location the same? How accurate are the two systems in measuring even if they are referencing from the same location? What variation might have been introduced by the club delivery on the shot I picked vs the reference set of shots? However, based on the data I do have and making some assumptions and guesses the results seem ok, within reason, a good place to start from and possibly refine. I do not see what is wrong with 70mph 7 iron, although that is one of my other areas of questioning. The title of the video has slow swing speed in all caps, and it seems like the videos I watch define 7i slow, medium, and fast as 70, 80, and 90. The whole question of mid iron swing speed and the implications for a players game and equipment choices is of interest to me as (according to my swing speed meter) over my ~decade break I lost 30mph swing speed on mine.
    • Maxfli, Maltby, Golfworks, all under the Dicks/Golf Galaxy umbrella... it's all a bit confounding. Looking at the pictures, they all look very, very similar in their design. I suspect they're the same club, manufactured in the same factory in China, just with different badging.  The whacky pricing structure has soured me, so I'll just cool my heels a bit. The new Mizuno's will be available to test very soon. I'm in no rush.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.