Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5940 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Is it possible to take a flat lie club and bend to a 2+ degree upright with minimal issues?
I got a great deal on burners but they're a 1.0" long and flat...just wondering what i'ma have to do to get these to my specs ....

In my Titleist 2014 9.5" Staff bag:

Cobra Bio+ 9* Matrix White Tie X  - Taylormade SLDR 15* ATTAS 80X - Titleist 910H 19* ATTAS 100X - Taylormade '13 TP MC 4-PW PX 6.5 - Vokey TVD M 50* DG TI X100 - Vokey SM4 55 / Vokey SM5 60* DG TI S400 - Piretti Potenza II 365g


Posted
Just take them to an experienced club maker and you should be fine (private club, local golf shop, etc.)

In my sunmountain.gif bag:
Driver  cleveland.gif  '09 Launcher 9* with Fit-On M Red X
Hybrids:  titleist.gif  585.H 21* with YS-6+ S, 585.H 17* with NVS Aldila X
Irons:  callaway.gif  Tour Authentic X-Prototype 4-PW with X100
Wedges:  callaway.gif  X Series Jaws 52*, 56*, 60*Putter:  callaway.gif  Tour Blue TT2Range Finder:  bushnell.gif  1500 TE


Posted
Is it possible to take a flat lie club and bend to a 2+ degree upright with minimal issues?

yes, you bend them.

9.5º TaylorMade R9 TP VooDoo XNV6 | TaylorMade R9 TP 13º 3W & 19º 5W Both with Fujikura Motore F1 85 | Mizuno MP-57 DG X-100 (3-PW) | Titleist Vokey 52º, 56º, 60º | 34'' Scotty Cameron Studio Select Newport 2 | The Cardinal Club [73.9/135]


Posted
be careful when bending those clubs. the taylormades tend to be a very hard metal to bend and often snap. i've seen it a few times in person, and it's not pleasant seeing such a nice club snapped at the hosel.

In my Diablo Edge Tour/ Titliest Stand Bag:
Driver: Nike VR Pro 8.5* w/ Myazaki 43g X
3 Wood: Nike VR Pro II 13.5* w/ Diamana Whiteboard 83g X
5 Wood: Cobra S9-1 Pro 18* w/ Diamana Whiteboard 83g X

Hybrid: Mizuno MP Fli-Hi 21* w/ Prolaunch Red X
Irons: 4-7 Titleist 712 CB, 8-9 712 MB w/ TT Dynamic Gold X100

Wedges: 46* Vokey SM4, 54* Vokey SM4, 60* TMade ATV

Putter: Scotty Cameron Newport 2 Belly 43"


Posted
I've seen a lot of them bent (and broke), and once you get past 3* of bend then they start getting iffy, especially with the harder metal cast clubs.

Updated 2/7/10 - In my Revolver Pro bag:
Driver: G-10 10.5* TFC 129 Stiff flex 3-W: G-10 TFC129 Stiff flex
#2h(17*) Stiff Flex #3(21*) & #4(24*): Hybrid G-10 TFC129 Stiff flex
5-PW: MP32 (DG300)S flex Wedges 52-8, 56-14, and 60-04 Bobby Jones Wedges
Putter: Rossa Monte Carlo 35"Grips:...


Posted
Thanks guys i appreciate it...do you think 2* would be too much or should i be fine?

In my Titleist 2014 9.5" Staff bag:

Cobra Bio+ 9* Matrix White Tie X  - Taylormade SLDR 15* ATTAS 80X - Titleist 910H 19* ATTAS 100X - Taylormade '13 TP MC 4-PW PX 6.5 - Vokey TVD M 50* DG TI X100 - Vokey SM4 55 / Vokey SM5 60* DG TI S400 - Piretti Potenza II 365g


Posted
Thanks guys i appreciate it...do you think 2* would be too much or should i be fine?

What are they now - how flat? You might be talking about a 4* bend (plus twisting). Good luck.

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Posted
I ordered my 09 Burners 7-A 2* up. I bought a 6 later and took it to the local "guy" and asked him to bend it. He tried, he got virtually nothing accomplished and said the TM Burners were very hard to bend and he was not surprised that he could not bend mine. He mentioned something about the black chrome treatment but I don't think Burner plus clubs have that treatment.
Tweaky, how did the metal look after heating it?

Current Bag
Ogio Synchro cart
'07 Burner Driver, 3 Fairway, and Rescue 5
Early Titelist Cavities
200 56, Spin milled 60 , Rossa  Suzuka


Posted
Micro torches don't cause any discoloration and I only heat for about 15 -20 at a time keeping the flame as low as possible on the hosel.

KZG Gemini 9* Aldila Proto By You
Leyland COPlasma 3wd
Golfsmith Q4 19*
Louisville HyLofter 24*
Wishon 770CFEs w/Nippons
Alpha P2 wedges
Louisville EWP putter


Posted
2 degrees is the max I'd try with cast stcks.

That is a bit unusual finding a lengthened club flat at least in my limited experience.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
Micro torches don't cause any discoloration and I only heat for about 15 -20 at a time keeping the flame as low as possible on the hosel.

...15 - 20 SECONDS...

Sorry

KZG Gemini 9* Aldila Proto By You
Leyland COPlasma 3wd
Golfsmith Q4 19*
Louisville HyLofter 24*
Wishon 770CFEs w/Nippons
Alpha P2 wedges
Louisville EWP putter


Posted
update: The irons sent to me were ironically tagged wrong. I went to my club guy to get them bent only to find they're of all things, not 1* upright but actually 3*...so no bending needed and i'm happier than ever lol...Thanks guys for all the input anyway :)

In my Titleist 2014 9.5" Staff bag:

Cobra Bio+ 9* Matrix White Tie X  - Taylormade SLDR 15* ATTAS 80X - Titleist 910H 19* ATTAS 100X - Taylormade '13 TP MC 4-PW PX 6.5 - Vokey TVD M 50* DG TI X100 - Vokey SM4 55 / Vokey SM5 60* DG TI S400 - Piretti Potenza II 365g


Note: This thread is 5940 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
    • Day 56 (4 May 26) - Worked on some ball-then-ground drills - going from P3 thru impact - with a slowed tempo, working to keep all parts in sync.   
    • Wordle 1,780 3/6 🟩⬜🟨🟨🟨 ⬜⬜⬜⬜⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,780 4/6 🟨⬜⬜⬜🟨 ⬜🟨🟨🟨⬜ 🟩🟨🟩🟨⬜ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.