Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5730 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Took my first S/T lesson this week and when we reviewed the pix, I was flipping at impact...having tough time holding the flying wedge....also having a tough time keeping left arm straight in the follow through sequence...my elbow was apparently bending too much....any suggestions?

  • Administrator
Posted
Took my first S/T lesson this week and when we reviewed the pix, I was flipping at impact...having tough time holding the flying wedge....also having a tough time keeping left arm straight in the follow through sequence...my elbow was apparently bending too much....any suggestions?

Uhh, "don't do that"? Is that a good suggestion?

Just kidding. The Golfing Machine defines a few motions. A chipping motion (two feet back and through) is called "basic motion." "Acquired Motion" is a longer stroke - about a half a swing. I'd work on a drill where you don't go much longer than the acquired motion - arms parallel to arms parallel (to the ground) - back slowly and then swing down and through. You'll want the sensation that you're keeping your elbows very close together and that you continue to maintain pressure between your arms and your chest (you can put a nickel in there and not let it fall out). If you have a big squishy ball that you can squeeze between your elbows, put it there and make the shorter acquired motion swings. The flipping and the straight arms (and loss of the flying wedge) are inter-related. If you flip, you're going to get the left elbow pulling away because otherwise the club will get into a really awkward position with the flipping. So try that - swing from 9 to 3 at 50% speed and really squeeze your elbows together and keep your arms against your chest, both PP4 and PP5 (pressure point).

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

  • 3 weeks later...
Posted
If you have a big squishy ball that you can squeeze between your elbows, put it there and make the shorter acquired motion swings.

I found a foam ball in the toy section at Wal-Mart that works perfectly for this. It's about the diameter of a medium sized plate. At first I tried using one of the inflated toy balls, taking a little bit of the air out to give me the right fit between my arms, but found that with the changes in temperature the size varied too much and I had to either add air or take out air too frequently. The foam ball never needs adjusting.

Not sure if they still have them as I haven't bought one in about a year. They are relatively cheap.
In my bag:

Driver: FT-5, 9° stiff
Wood: Big Bertha 3W/5W
Irons: X-20 TourWedges: X Tour 52°/56°Hybrids: Idea Pro 2/3/4Putter: Black Series #2Ball: NXT Extreme/NXT Tour
Awards, Achievements, and Accolades

  • Administrator
Posted
Meta Moment:

The Taly is great too. It's a different approach, mind you - a ball squeezed is active learning, while the Taly is more about visualization and developing your own feeling...

I found a foam ball in the toy section at Wal-Mart that works perfectly for this.

Nice. Heck, you could roll up a sweatshirt and tie it with a shoelace if you want - whatever works...

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
I took another approach to this by tying a band around my waist and left arm. That way, I couldn't possibly get the left arm away from the chest. Greatly improved my ball-striking. Didn't record any video, but the ball went lower and it felt better.

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Awards, Achievements, and Accolades

Note: This thread is 5730 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 22: mirror work for a while. Working on my elbow in the downswing - keeping it in a better position. 
    • Day 36 (16 Dec 25) - continued the exaggerated left foot weight shift trigger adding some easy low flighted pitches with the 5h and a few putting style bump and runs with the 5h as well.
    • Day 442 - 2025-12-16 Got some swings in at an indoor academy a little south of Erie.
    • Has anyone played the new Maxfli forged irons? For the first time in I don't know how many years, they have come out with new clubs. From what I read, Maxfli was bought by Taylor Made a long time ago which then took all of their ball making technology and patents in order to get into that market. The club business was left to whither and the reorganized company, now a part of Dicks / Golfworks / Maltby, is producing these new clubs. (Their Tour X balls which I play are really good.) Anyway, I tried them both out at Golf Galaxy. There's a player's distance iron (XC-3) and a blade (XC-2) and both feel really, really nice, almost "Mizuno-like" in their soft buttery feel and they're a bargain at $800 for a set. I'm planning to ditch my Titleist's and want to go back to a forged iron. I almost pulled the trigger on the Mizuno Pro-245's last summer, but a damaged tendon sheath in my finger combined with a back injury messed up my golf game so I held off. Now the Pro-245's are no longer available, soon to be replaced by the MX-15. (At twice the price of the Maxfli's...that's what got my attention in the first place.) If anyone has played with the new Maxfli's or just tried them out like I did, let me know what you think.
    • Day 126 12-16 Back swing and rotation work today. Didn't hit any balls. Focusing on rotating and getting to lead side. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.