Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5586 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
So I am thinking about purchasing some TaylorMade TP XFT wedges. I never really paid much attention to the bounce on wedges. So could someone explain what the numbers mean. Is a higher number a higher bounce and vice versa? What's the benefit of a high bounce, what's the benefit of a low bounce. Which is recommended for a handicap in the 20s like me? My main problem with my iron game is I often skull my shots and they end up skimming right off the green. Thanks for all the help.

taylormade.gifR11S 9* Driver Aldila RIP Phenom 60 R Flex

taylormade.gifRBZ 3W 15* Matrix Ozik XCon-5 R Flex
taylormade.gif'11 Rescue Hybrids 3 (18*), 4 (21*) Aldila RIP 65 HB R Flex
taylormade.gifR11 5-PW KBS Steel R Flex | taylormade.gifTP XFT 52* 56* 60* KBS Steel

cameron.gif California Coronado 35" | ogio.gif Grom Black Plaid Bag |  Penta TP

 


Posted
A higher bounce is good for playing out of soft lies, like fluffy sand or wet rough. A lower bounce is better for playing off hardpan lies like bunkers with very little sand or where the rough is mostly dirt.

My Tools of Ignorance:

Driver: Ping I20 9.5*
Woods/Hybrids: Cobra AMP 3W and 3 HY

Irons: Cobra AMP 4-GW

Wedges: Callaway Forged Copper 56* and 60*

Putters: Scotty Cameron  35" (Several of the flow neck blade variety)

Ball: Bridgestone B330-RX and Srixon Z-Star

Bag: Nike Performance Carry


Posted
We can talk hours about bounce ..... basicly bounce prevents a club to dig in the grass or sand much, next there is passive and active bounce, to make things more simple.

Bob Vokey recently talked to a group of Netherlands clubfitters and said for the average golfer (and that is a 20 capper for sure) it is best to buy the medium bounce versions of his wedges, wellll the guy sure knows what he is talking about ..... so who are we to decide differently.

If you are buying a wedge for sand shots it is best to buy something like a 54-56 sandwedge with a 11-12 bounce, calling that universal or allround, but is the sand at your home course is very soft maybe 14 degrees bounce is better. For a lob wedge most players prefer a lower bounce to get under the ball "easier" and then 7-10 bounce is perfect..... For a gap wedge or fringe wedge of about 50-52 degrees loft it is best to understand that these wedges are mostly used for full shots, so a bounce that is about equal to the bounce of your wedge 8-9 bounce.......

For a 20 capper ...... stay away from the 4 degr. bounce 60 degrees wedges, unless you like to visit your uncle at the other side of the globe -;/

Cal Razr Hawk 10.5 | TM Superfast 3W | Adams Idea Pro Black 20 | MP-68 3-PW | TW9 50/06 + 58/12 | Ram Zebra Putter


Posted
the lower the bounce, the more the club has a tendency to dig instead of ride along the ground. If you're playing in very firm conditions or don't have a very steep swing, then a low bounce wedge would work better than a high bounce(12 degrees or more). If you're playing in soft conditions then the higher bounce will keep you from digging too deep and hitting fat shots. Its best to go with a wedge bounce somewhere around 9 degrees for most players...versatile bounce that can be effective anywhere.

I like more bounce on my gap wedge(14 degrees) and less bounce on my lob wedge(6 degrees). Having a low bounce lob wedge lets me open the face if I need to without worrying about the club bouncing off the ground and hitting the ball thin. If I'm hitting my gap wedge, its usually from the fairway and I mostly play on pretty soft fairways so the high bounce keeps me from digging up a groundhog and hitting a fat shot.

My philosophy on golf "We're not doing rocket science, here."


Posted
Good comments by Elvis, Gerald and Paradox.

Also, there's two ways to considering bounce:
* Rated bounce, which is determined by measurement and often engraved on the clubhead
* Effective bounce, determined by clubhead-turf interaction factors, and can be more or less than rated bounce

Club designer Ralph Maltby has a good web link explaining the details (with drawings too):
http://www.ralphmaltby.com/50

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted
So could someone explain what the numbers mean. Is a higher number a higher bounce and vice versa? What's the benefit of a high bounce, what's the benefit of a low bounce..

Bounce is the angle between the leading edge of the club, trailing edge of the club, and the ground in front of the clubface. A decent diagram can be found here:

http://www.scratchgolf.com/tech-talk/bounce/ As you can see from the bottom diagram on that page, bounce angle is only part of the story and not the only factor that determines how the sole interacts with the ground. All else being equal, a higher bounce (greater angle) will reduce the club's tendency to dig and a lower bounce will increase this tendency. http://thesandtrap.com/bag_drop/wedg...why_it_matters a relevant quote: "Bounce is the angle of the sole measured against a horizontal line (the ground) when the club is in the address position and the shaft is vertical. The more bounce there is, the higher the leading edge is off the ground when the club is held in its square position. It's expressed in degrees . . . Gap and lob wedges generally carry six to eight degrees of bounce while sand wedges usually have somewhere between 12 and 14 degrees of bounce. That's because the more bounce there is, the more the bottom of the club acts like the bow of a boat to prevent the club from digging into the ground or the sand."

Posted
So could someone explain what the numbers mean. Is a higher number a higher bounce and vice versa? What's the benefit of a high bounce, what's the benefit of a low bounce.

I really do find it extraordinary that people create threads like this. The whole point of the internet is that you can do a search and find information that has been created already. In cases like this, millions of times. Forums are for sharing thoughts, ideas and opinions, not asking for people to type out for the umpteenth time factual, well established and easily sourced pieces of information. What is wrong with going to Google - or the using the search function on this site - and typing in "wedge bounce" or "low bounce wedge benefits". You'll notice that many of the kind respondents have done this for you. Could you not have done it yourself?

Talk about reinventing the wheel!

In the race of life, always back self-interest. At least you know it's trying.

 

 


Posted
I really do find it extraordinary that people create threads like this. The whole point of the internet is that you can do a search and find information that has been created already. In cases like this, millions of times. Forums are for sharing thoughts, ideas and opinions, not asking for people to type out for the umpteenth time factual, well established and easily sourced pieces of information. What is wrong with going to Google - or the using the search function on this site - and typing in "wedge bounce" or "low bounce wedge benefits". You'll notice that many of the kind respondents have done this for you. Could you not have done it yourself?

I do find it really extraordinary that people feel they need to reply to threads and add nothing of valuable knowledge or ideas to the topic of discussion. Its quite simple. You see the thread title, open it up, read what I wrote in the original post and dont reply if you dont like what I wrote. No one is forcing you pal!

How many topics on here can actually be found just by "simply googling" it? About 98%. I posted what I did here because I like the views and opinions of the community of people here. Nearly everyone who replies to a thread adds valuable and useful knowledge to the original post that everyone can read and learn from. Notice I said everyone because there is always that handful of people who need to be the internet smart guy or tough guy because its something the can hide behind and get off on because its something they wouldn't do in public or face to face. So you are telling me if a friend of yours asked you the same question I did about wedges and bounce, because they knew you have knowledge of the topic, you would blow them off and tell them to "just go google it"? Think not! As for those of you who actually replied with useful knowledge to what I asked, thank you! I think I am going to go with the GW-52.09, SW-56.12 and LW-60.10. The thing is I am currently playing 48, 52, 56 and 60 wedges. If I went with the 3 mentioned prior, it would put me at the 14 club limit (Im currently at 15) but it would leave me without a 48 wedge. Would it be unwise to go without a 48?

taylormade.gifR11S 9* Driver Aldila RIP Phenom 60 R Flex

taylormade.gifRBZ 3W 15* Matrix Ozik XCon-5 R Flex
taylormade.gif'11 Rescue Hybrids 3 (18*), 4 (21*) Aldila RIP 65 HB R Flex
taylormade.gifR11 5-PW KBS Steel R Flex | taylormade.gifTP XFT 52* 56* 60* KBS Steel

cameron.gif California Coronado 35" | ogio.gif Grom Black Plaid Bag |  Penta TP

 


Posted
with your set of irons, theres no way I'd go with a gap from 40* to 52* Stick with a 48, 54-56, 60 if you're wanting to drop a wedge. I would personally go with 48, 54, 60. Your bounce choice will have to be based on where you play and how you like to hit shots.

My philosophy on golf "We're not doing rocket science, here."


Posted
As for those of you who actually replied with useful knowledge to what I asked, thank you! I think I am going to go with the GW-52.09, SW-56.12 and LW-60.10. The thing is I am currently playing 48, 52, 56 and 60 wedges. If I went with the 3 mentioned prior, it would put me at the 14 club limit (Im currently at 15) but it would leave me without a 48 wedge. Would it be unwise to go without a 48?

Well if your sig is current, the 9i of your set is 40/07 ..... so currently you go from 40* to 52* ..... personally I wouldn't mind, but for most people that is quite a gap...... in most sets a 9i is about 43-44* ..... if you want a more even spread I would suggest to go for 46/08 - 52/08 - 58/12..... both the 46 and 52 would be wedges to be used with mostly (near) full swings and the 58 would be a great iron for bunkers, rough and the occasional lobs or flops.

At hc 22 you can at best forget the 60* and I personally believe 4* gaps are only a benefit to really strong hitting low handicappers, where these 4* gaps mean 20 yds gaps, but at hc 22 these 4* gaps, might well be to close to call..... actually.

Cal Razr Hawk 10.5 | TM Superfast 3W | Adams Idea Pro Black 20 | MP-68 3-PW | TW9 50/06 + 58/12 | Ram Zebra Putter


Posted
with your set of irons, theres no way I'd go with a gap from 40* to 52* Stick with a 48, 54-56, 60 if you're wanting to drop a wedge. I would personally go with 48, 54, 60. Your bounce choice will have to be based on where you play and how you like to hit shots.

I have a "home course" if I am going out just myself but I like to go out and play at as many places as I can. When I go myself it is just basically practice to me. As far as sticking with a 48 wedge, does Taylormade even make a 48 wedge? Ive been looking on their site and their wedges only go to 50 of 52 as the lowest.

taylormade.gifR11S 9* Driver Aldila RIP Phenom 60 R Flex

taylormade.gifRBZ 3W 15* Matrix Ozik XCon-5 R Flex
taylormade.gif'11 Rescue Hybrids 3 (18*), 4 (21*) Aldila RIP 65 HB R Flex
taylormade.gifR11 5-PW KBS Steel R Flex | taylormade.gifTP XFT 52* 56* 60* KBS Steel

cameron.gif California Coronado 35" | ogio.gif Grom Black Plaid Bag |  Penta TP

 


Posted


Don't know why that did not show up as an image????

 :macgregor: V Foil 8.5*    :tmade: Mid Rescue 16*  -- :wilsonstaff: RM  2 thru Wedge -- :vokey: 56/10  -- :scotty_cameron: Studio Design 2  & a  :srixon: Z Star 


Posted
So you are telling me if a friend of yours asked you the same question I did about wedges and bounce, because they knew you have knowledge of the topic, you would blow them off and tell them to "just go google it"? Think not!

I'd be happy to discuss it with them.

I also wouldn't post a thread in a motoring forum asking someone to explain to me how the internal combustion engine works, "pal". That is what you have done esssentially. You should Google for your basic information - you are too lazy to do that - and then ask specific questions following yoir research.

In the race of life, always back self-interest. At least you know it's trying.

 

 


Posted
I'd be happy to discuss it with them.

If I just wanted a text book definition of what bounce was I would have looked it up myself. I wanted opinions on what to use for my handicap. Lazy? Nope. Would rather a personal opinion based on experience or knowledge? Yep.

You can go from page to page and see multiple threads about the same thing. Its an internet forum. It happens. Who cares besides you? There's an extremely simple solution. Do not return. Simple as that.

taylormade.gifR11S 9* Driver Aldila RIP Phenom 60 R Flex

taylormade.gifRBZ 3W 15* Matrix Ozik XCon-5 R Flex
taylormade.gif'11 Rescue Hybrids 3 (18*), 4 (21*) Aldila RIP 65 HB R Flex
taylormade.gifR11 5-PW KBS Steel R Flex | taylormade.gifTP XFT 52* 56* 60* KBS Steel

cameron.gif California Coronado 35" | ogio.gif Grom Black Plaid Bag |  Penta TP

 


Posted
If I just wanted a text book definition of what bounce was I would have looked it up myself. I wanted opinions on what to use for my handicap. Lazy? Nope. Would rather a personal opinion based on experience or knowledge?

OK, all points are made ...... pfffff.

I was trying to advise you on the bounces, etc....... suddenly to see you updated your signature irons not longer being the Edge with a 9i/40 ..... but the R9 4i-PW(46), which means that your 46* question isn't very valid anymore ....... hmmm..... it seems like you allready decided to buy the wedges, so what was this all about then, you kind of just wanted advise .... not to listen too -;) ...... just had to be TM ..... huhhhhh. Now we wonder which of your 15 clubs is going to stay in the garage !!!!!!!!!!!!!!!!!! You'd better change your ball to : TM Penta ...... and maybe next week ask some interesting questions on Taylor Made bags and update the sig after about 10 replies. Best of luck with your new toys !!!

Cal Razr Hawk 10.5 | TM Superfast 3W | Adams Idea Pro Black 20 | MP-68 3-PW | TW9 50/06 + 58/12 | Ram Zebra Putter


Posted
I couldn't make hide nor hair of this discussion-what little I did glean lead me to this: lose the 60* wedge. 14 clubs, you're set, you don't need the 60* (no matter how many 25 'cappers here tell you it's their favorite or most reliable club). Take it only to the the range or practice green-in your actual bag use a 56* or 58* SW and be done with it.

Posted
I really do find it extraordinary that people create threads like this. The whole point of the internet is that you can do a search and find information that has been created already. In cases like this, millions of times. Forums are for sharing thoughts, ideas and opinions, not asking for people to type out for the umpteenth time factual, well established and easily sourced pieces of information. What is wrong with going to Google - or the using the search function on this site - and typing in "wedge bounce" or "low bounce wedge benefits". You'll notice that many of the kind respondents have done this for you. Could you not have done it yourself?

Seriously what is your deal? Sombody is just asking for advice, your the biggest troll on this forum! I have never ever seen you give any "good" adivce to sombody! If your not going to contribute in a helpfull way don;'t bother at all. All your working on is trying to get a huge post count by trolling the forums!

Lower Bounce will Dig more, higher bounce will dig less. For higher HC's it's usully better that they usually get more bounce (EG around 12*) But lower bounce is really good for hard ground or bunkers with little sand in them and higher bounce is good when bunkers have lots of sand and does not have alot of tight lies. Most of witch has already been said.

Driver: 909D3 8.5* Diamana White Board X
3 Wood: MP 630 15* GRAFALLOY PROLAUNCH RED X
Hybrid: 909H 19* "Real" VooDoo X
3 - P: MP-68 KBS Tour Black Nickel X
56* 10 Wedge Vr60* 06 Wedge: VrPutter: Custom Made.Golf Ball: TOUR B330SI am the greatest, I said that even before I knew I was....


Posted
OK, all points are made ...... pfffff.

I already had the R9s purchased prior to this thread (4-9). I knew I wanted to switch to the TP XFT wedges but I wasn't sure of which bounce to go with. After reading your first reply I decided to go with that setup and made my purchase yesterday, also purchased the R9 PW. I already had my mind made up what I wanted just not the specs.

taylormade.gifR11S 9* Driver Aldila RIP Phenom 60 R Flex

taylormade.gifRBZ 3W 15* Matrix Ozik XCon-5 R Flex
taylormade.gif'11 Rescue Hybrids 3 (18*), 4 (21*) Aldila RIP 65 HB R Flex
taylormade.gifR11 5-PW KBS Steel R Flex | taylormade.gifTP XFT 52* 56* 60* KBS Steel

cameron.gif California Coronado 35" | ogio.gif Grom Black Plaid Bag |  Penta TP

 


Note: This thread is 5586 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.