Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5024 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

So Sunday I went and played a local course: Arrowcreek Country Club in Reno, Nevada. On the range just next to me is a father and his teenage son warming up, which I think nothing of while I go ahead and warm up. I then notice how pure both of them are hitting every shot, so I take a closer look. It's Chris DiMarco and his son!!! Just as I realized this, they were off on their round, so I didn't get to shake his hand or anything. Come the end of the round the guy tells us there is a bunch of pros up on the range getting ready for the Reno-Tahoe Open that is this week. So freaking cool... :P

So the question of this post is: Have you ever just run into a pro before? Did you recognize him/her right away?

underparnv

That's how I like my golf. A kick in the face. -Ben

Driver: 983E 8.5* w/ stock stiff flex shaftIrons: MP60 - 2 through 9 irons (swap out the 2 iron for my three wood at some courses)Wedges: 588 Chrome - 47* Pitching Wedge, 53* Gap Wedge, 56* Sand Wedge MP-T Black Ni - 60* Lob WedgePutter:.....

Posted

Thats really cool. To bad you didn't get to meet him, but then again he's with his kid and probably doesn't want to be bothered.

Driver: Callaway Big Bertha 10.5* 

3WD:  Callaway Big Bertha 15* / X2 Hot H4 Hybrid
Irons:  Callaway Apex 4-PW Project X 5.5 shafts

Wedges: Callaway MackDaddy 2  52/58
Putter: Odyessey Metal X Milled 1


Posted
DiMarco lives about a hard 7 iron fom me. Nice place. He needs to make a few more cuts if he's gonna keep up with that mortgage! :-D

In David's bag....

Driver: Titleist 910 D-3;  9.5* Diamana Kai'li
3-Wood: Titleist 910F;  15* Diamana Kai'li
Hybrids: Titleist 910H 19* and 21* Diamana Kai'li
Irons: Titleist 695cb 5-Pw

Wedges: Scratch 51-11 TNC grind, Vokey SM-5's;  56-14 F grind and 60-11 K grind
Putter: Scotty Cameron Kombi S
Ball: ProV1

Awards, Achievements, and Accolades

Posted

Many years ago, I was playing the Hombre Golf Club in Panama City Beach, Fl. After our round we went up and sat at the bar to have a few beers. Then Hubert Green came in and sat down next us. Very nice guy!

Phillip


Posted

I've run into Tom Watson on a couple of occasions, literally!  About 20 years ago, I was walking into Arthur Bryant's BBQ, as I turned the corner we about knocked each other down.  Then about 3 years ago I was walking around at a home improvement show and not paying attention and almost ran into his wife!  I never spoke to him just kind of nodded, just to let him know I recognized him but wasn't about to intrude on his personal time.

Craig 

Yeah, wanna make 14 dollars the hard way?


Posted
I've met a few pros, but the biggest...hmm...disagreement I've ever had with a pro was with Fulton Allem. He was playing in Memphis and I ran into him at the hotel bar where he and his caddy were staying. They were both pretty lit up. They had some pretty radical racial views as a result of being from South Africa. Very much a segregationist at the time, though his opinion may have since changed. The incident was during the early 90's when apartheid was still strong.

In The Bag: - Patience - Persistence - Perseverance - Platitudes


Posted

I have seen Kevin Na practicing at a course i play at sometimes (earlier this year before the slow play controversy).

Didnt want to bother him so i just let him do his thing.  Was nice to watch a pro swing in person.  Crisp iron shots.


Posted

No, but my older daughter has been in Stewart Cink's backyard.  She lives in Sugarloaf with her mother and they went on a tour of outdoor living spaces a couple of year's ago.

:ping:

  • G400 - 9° /Alta CB 55 Stiff / G410-SFT - 16° /Project X 6.0S 85G / G410 - 20.5° /Tensei Orange 75S
  • G710 - 4 iron/SteelFiber i110cw Stiff • / i210 - 5 iron - UW / AWT 2.0 Stiff
  • Glide SS - 54° / CFS Wedge / Glide 2.0 SS - 58°/10 / KBS 120S / Hoofer - Black

:scotty_cameron: - Select Squareback / 35"  -  :titleist: - Pro V1 / White  -  :clicgear: - 3.5+ / White

Awards, Achievements, and Accolades

Note: This thread is 5024 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.