Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 3611 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Just curious, in theory, what would happen if I played the ball in the middle of my stance with the driver? ( vs forward )

Awards, Achievements, and Accolades

Posted (edited)
1 hour ago, stealthhwk said:

Just curious, in theory, what would happen if I played the ball in the middle of my stance with the driver? ( vs forward )

I think if you did that, when you shift your weight forward, you would be hitting down on the ball with the club that has the least elevation of any club in your bag.    So you'd have the choice of either hitting ground balls, or not shifting your weight forward, which would mean a loss of power. 

Edited by Marty2019
Awards, Achievements, and Accolades

Posted
32 minutes ago, Marty2019 said:

I think if you did that, when you shift your weight forward, you would be hitting down on the ball with the club that has the least elevation of any club in your bag.    So you'd have the choice of either hitting ground balls, or not shifting your weight forward, which would mean a loss of power. 

Thanks!!! I fight the worm burner with the driver already. So, this would probably be the absolute worst idea ever!

Awards, Achievements, and Accolades

Posted
29 minutes ago, Marty2019 said:

I think if you did that, when you shift your weight forward, you would be hitting down on the ball with the club that has the least elevation of any club in your bag.    So you'd have the choice of either hitting ground balls, or not shifting your weight forward, which would mean a loss of power. 

I have always struggled with keeping the ball forward in my stance.

Big pushes, just can't get the face closed quick enough, no weight forward, short drives, worm burners.

Brian   

 

Awards, Achievements, and Accolades

Posted
9 minutes ago, stealthhwk said:

Thanks!!! I fight the worm burner with the driver already. So, this would probably be the absolute worst idea ever!

It would tend to get more spin on the ball. Still undesirable, though.

Worm burners could also come from bringing the club too high at impact and thinning your driver.

:ping:  :tmade:  :callaway:   :gamegolf:  :titleist:

TM White Smoke Big Fontana; Pro-V1
TM Rac 60 TT WS, MD2 56
Ping i20 irons U-4, CFS300
Callaway XR16 9 degree Fujikura Speeder 565 S
Callaway XR16 3W 15 degree Fujikura Speeder 565 S, X2Hot Pro 20 degrees S

"I'm hitting the woods just great, but I'm having a terrible time getting out of them." ~Harry Toscano

Awards, Achievements, and Accolades

Posted
1 minute ago, bste said:

I have always struggled with keeping the ball forward in my stance.

Big pushes, just can't get the face closed quick enough, no weight forward, short drives, worm burners.

Sounds like your downswing might be a little too quick.  When this happens to me, I can usually cure it by starting my downswing more slowly.   This gives me time to start my weight forward.   

10 minutes ago, stealthhwk said:

Thanks!!! I fight the worm burner with the driver already. So, this would probably be the absolute worst idea ever!

I'm not saying you're supposed to do that.   I'm saying that will be the result of you put the ball back in your stance.   You will have a choice of 2 bad alternatives:  either not shift your weight forward, or hit down on the ball.   Both of those are bad.  

 

 

Awards, Achievements, and Accolades

Posted
11 minutes ago, bste said:

I have always struggled with keeping the ball forward in my stance.

Big pushes, just can't get the face closed quick enough, no weight forward, short drives, worm burners.

Could this also be a shaft issue? 

:ping:  :tmade:  :callaway:   :gamegolf:  :titleist:

TM White Smoke Big Fontana; Pro-V1
TM Rac 60 TT WS, MD2 56
Ping i20 irons U-4, CFS300
Callaway XR16 9 degree Fujikura Speeder 565 S
Callaway XR16 3W 15 degree Fujikura Speeder 565 S, X2Hot Pro 20 degrees S

"I'm hitting the woods just great, but I'm having a terrible time getting out of them." ~Harry Toscano

Awards, Achievements, and Accolades

Posted

 

9 minutes ago, Marty2019 said:

Sounds like your downswing might be a little too quick.  When this happens to me, I can usually cure it by starting my downswing more slowly.   This gives me time to start my weight forward.   

I'm not saying you're supposed to do that.   I'm saying that will be the result of you put the ball back in your stance.   You will have a choice of 2 bad alternatives:  either not shift your weight forward, or hit down on the ball.   Both of those are bad.  

 

 

You're right, I'm changing my preshot routine to slow down my back swing, get things set, "in sync" for the downswing.

 

4 minutes ago, Lihu said:

Could this also be a shaft issue? 

Absolutely, I'm using the Kuro Kage S shaft that came stock, haven't been fit for anything stiff in a while.  :whistle:

Brian   

 

Awards, Achievements, and Accolades

Posted
7 minutes ago, bste said:

 

You're right, I'm changing my preshot routine to slow down my back swing, get things set, "in sync" for the downswing.

 

Absolutely, I'm using the Kuro Kage S shaft that came stock, haven't been fit for anything stiff in a while.  :whistle:

Guessing a brand new M1? Nice!

The guy in the TM booth mentioned that the Kuro Kage shaft is more stout than most other shafts TM sells. For instance, S might want to see 105 SS or higher? I think X is for people in the 116 range?

It depends on how much of a push you get, I guess? If you hit far enough then it's not so bad, and you would certainly keep it controlled.

:ping:  :tmade:  :callaway:   :gamegolf:  :titleist:

TM White Smoke Big Fontana; Pro-V1
TM Rac 60 TT WS, MD2 56
Ping i20 irons U-4, CFS300
Callaway XR16 9 degree Fujikura Speeder 565 S
Callaway XR16 3W 15 degree Fujikura Speeder 565 S, X2Hot Pro 20 degrees S

"I'm hitting the woods just great, but I'm having a terrible time getting out of them." ~Harry Toscano

Awards, Achievements, and Accolades

Posted

@LihuI don't mean to hijack this thread, but the driver is a covert, so a pre tini shaft, and closing the club face has helped a lot. 

Brian   

 

Awards, Achievements, and Accolades

Posted
3 hours ago, stealthhwk said:

Just curious, in theory, what would happen if I played the ball in the middle of my stance with the driver? ( vs forward )

Read LSW, there is a chapter on putting the ball forward and raising the tee height and why. . .

 

20 minutes ago, bste said:

closing the club face has helped a lot. 

I think moving the ball back in your stance will open the face a little bit? So, maybe the tendency is to close the face at address if your ball is too far back in your stance?

This is a pretty non-optimal condition as you might end up putting a lot more spin on the ball in addition to artificially closing the face?

:ping:  :tmade:  :callaway:   :gamegolf:  :titleist:

TM White Smoke Big Fontana; Pro-V1
TM Rac 60 TT WS, MD2 56
Ping i20 irons U-4, CFS300
Callaway XR16 9 degree Fujikura Speeder 565 S
Callaway XR16 3W 15 degree Fujikura Speeder 565 S, X2Hot Pro 20 degrees S

"I'm hitting the woods just great, but I'm having a terrible time getting out of them." ~Harry Toscano

Awards, Achievements, and Accolades

Posted
35 minutes ago, Lihu said:

 

I think moving the ball back in your stance will open the face a little bit? So, maybe the tendency is to close the face at address if your ball is too far back in your stance?

This is a pretty non-optimal condition as you might end up putting a lot more spin on the ball in addition to artificially closing the face?

Yea, I've got it written down somewhere, how to reduce spin, about hitting up and something else.

 

Brian   

 

Awards, Achievements, and Accolades

Posted

If I have a bad day and I need it in the fairway I will put ball in middle of stance. For me I feel I hit down on the ball. Doesn't help that I have a tendency to be too quick, as well as get steep. Distance loss is 30-40 yds but usually stays in fairway for me with more fade. Moving the ball forward and high, while slowing down and shortening my backswing led to hitting much better drives, they are straighter and often they have a slight draw. Putting all thoughts aside and just relaxing has helped. 

  • Upvote 1
Awards, Achievements, and Accolades

Posted

Lose forward roll, lose trajectory, and lose some of the power of the weight shift to the left side.


Posted

I just watched a playing partner set his ball back in his stance purely by accident. I noticed that the ball was almost 2 balls back from his lead heel. I watched intently because I was kind of curious what could happen. Well, he crowned the ball the first time during the entire round. Didn't know it would do that. Maybe next time, I should mention something to him?

:ping:  :tmade:  :callaway:   :gamegolf:  :titleist:

TM White Smoke Big Fontana; Pro-V1
TM Rac 60 TT WS, MD2 56
Ping i20 irons U-4, CFS300
Callaway XR16 9 degree Fujikura Speeder 565 S
Callaway XR16 3W 15 degree Fujikura Speeder 565 S, X2Hot Pro 20 degrees S

"I'm hitting the woods just great, but I'm having a terrible time getting out of them." ~Harry Toscano

Awards, Achievements, and Accolades

Posted
On 2/20/2016 at 5:57 AM, stealthhwk said:

Just curious, in theory, what would happen if I played the ball in the middle of my stance with the driver? ( vs forward )

Hitting down the the driver, produces lower launch and higher spin, loss of significant distance. 

On 2/20/2016 at 8:09 AM, bste said:

I have always struggled with keeping the ball forward in my stance.

Big pushes, just can't get the face closed quick enough, no weight forward, short drives, worm burners.

That is more the swing than your ball position. 

On 2/20/2016 at 8:22 AM, Lihu said:

Could this also be a shaft issue? 

Not really. Unless you are going from a shaft designed for a senior to something PGA Tour. Most stock shafts can be played by a high number of players. 

5 minutes ago, ppine said:

Giving people advice is a slippery slope.

That is why the number 1 advice given on this forum is for the person to post a video of their golf swing such that we can see what exactly is going on and giving specific advice. 

This thread doesn't warrant that because moving the ball back in the stance for the driver is highly counterproductive. 

Matt Dougherty, P.E.
 fasdfa dfdsaf 

What's in My Bag
Driver; :pxg: 0311 Gen 5,  3-Wood: 
:titleist: 917h3 ,  Hybrid:  :titleist: 915 2-Hybrid,  Irons: Sub 70 TAIII Fordged
Wedges: :edel: (52, 56, 60),  Putter: :edel:,  Ball: :snell: MTB,  Shoe: :true_linkswear:,  Rangfinder: :leupold:
Bag: :ping:

Awards, Achievements, and Accolades

Posted

Just to add. People that hit low drivers, i.e. worm burners I see do 2 things, they tend to stand up at impact, which causes them to move forward causing them to hit down and usually the club face is before the bottom of the arc, and or they try to get their weight forward, to get more power, and the ball winds up way behind their head, and body. Watch any pro, or good player hit driver, notice the relation of their body and head position to the ball, it's always behind the ball, although the hips may slide in front of the ball. When staying behind the ball, you have a better chance to hit Up on it. This is where a video comes in real handy.

Awards, Achievements, and Accolades

Note: This thread is 3611 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 9: 2026.01.11 Hit some balls at the range, concentrating on weight distribution at address, got some on film.
    • Day 468 - 2026-01-11 Loooooong day. Did some work in the patio door (as a mirror) when I got home.
    • I caught a video on this driver; the face tech seems crazy. Looking at the heat map for ball speed, hitting it basically anywhere on the face only loses a few percent ball speed. The surprising and counter intuitive part to me was that for flat faced clubs, ball speed loss is directly proportional to distance loss. For clubs with bulge and roll this is apparently not true. The surprising part of that story being that the max distance potential looks to be a tiny pee sized area for this driver, and I feel in general for drivers. The counter intuitive part being (the myth?) that blade irons have a pee sized sweet spot and missing that tiny spot causes dramatic losses. And that modern drivers, maybe 2017 on, have massive sweet spots and are ultra forgiving. Where in reality, if this heat map data is valid and reliable, it might be a bit of the opposite. This insane tech driver appears to have a pea sized "sweet spot" while Mizuno Pro 241 irons are 28% more forgiving compared to the average of all clubs measured. Not compared to other players irons, compared to all clubs from all categories, players to SGI! The Pro 241 being essentially just a solid chunk of metal with no "tech" at all. Which for me devolves into a whole mess of what is forgiveness really? And in measurable and quantifiable results how many yards, or feet, does that translate into?  
    • Wordle 1,667 3/6 🟨🟨⬜⬜⬜ ⬜⬜⬜🟨⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,667 3/6 ⬜⬜🟩⬜⬜ ⬜🟨🟩⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.