Jump to content
IGNORED

How often do you Clean your Clubs?


jamesbei
Note: This thread is 5797 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

0  

  1. 1. How often are your "golf bats" cleaned

    • After every round
      63
    • After every 2-3 Rounds
      36
    • As i go Round
      54
    • Barely ever, maybe before big comps
      19


Recommended Posts

When i play with the pro at my course, (which i do quite regularly as i work there aswell), he always moans at me for not cleaning my clubs.

I scrape all dirt out of the grooves before my shots and may clean them before a big competition, however in general i dont have the time cos in the summer holidays i play almost every day but i keep them generally respectable, but i was wondering how often all you other peeps clean your clubs and whether it makes a difference.

INT Grom

MP600 - UST V2 STIFF SHAFT

PT906F2 UST V2 STIFF SHAFT RESCUE DUAL MP60 Irons CG12 Wedges Redwood Anser Black SatinITS ALL GOOD!! =]

Link to comment
Share on other sites


  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

I take the brushes to them just before every round.

On my tombstone: "If this is the worst thing that ever happens to me, I'm doing just fine!"






 

Link to comment
Share on other sites


Everyone is different, but I clean my clubs often. I am a set up kinda guy. One reason I have not switched from a pure blade is that I like the clean lines and shiney face when cleaned. I am more interested in what you all clean your clubs with? But with undue negative rep I am unable to post new threads....
Link to comment
Share on other sites


I dry brush the faces of mine with a brass wire brush.
I dry brush the backs and logo areas with a plastic(nylon) wire brush.
All the mud has to be dry before you can do this. That is why I wait until the beginning of the next round to clean them. Its just easier..

On my tombstone: "If this is the worst thing that ever happens to me, I'm doing just fine!"






 

Link to comment
Share on other sites


I soak a towel and squeeze out the excess before I head out for a round and keep it draped on the chassis of my BagBoy... I wipe my clubs clean after each stroke - if neccesary - before putting them back in the bag. Only takes a couple seconds.

What's in my bag:
Cleveland Hibore XLS Monster Driver
TourEdge Exotics 2,3,4 hybrid irons
Tommy Armour 845cs Silverbacks 5-PW
Assorted wedges, Ping Scottsdale Anser

Link to comment
Share on other sites


I keep a small brush on my bag so I try and do it after every shot, time permitting. I don't like to hold others up, so if I am the last to hit on a hole I will wait until I have the time. If I pull out a club and it's dirty I will clean it off before I hit.

Every once in a while I will take them in the house and clean them good. Clean the grips, wipe down the shaft, and really get the clubface clean. Warm water, dishsoap, and an old toothbrush works great.

I will judge my rounds much more by the quality of my best shots than the acceptability of my worse ones.

Link to comment
Share on other sites


I clean them after every shoot with a wet towel and after with a dry one. And after the whole round at home I clean them completely with water, towel and a plastic brush, to remove all kind of dirt on them.

----------------------------------
In my XXV Anniversary 10.5 Callaway Staff Bag
Driver FT-i 10°
Woods Big Bertha 3, 5, 7

Hybrid 4 X-Hybrid

Irons X-20 5-SW

Wedge 60° X-Tour

Putter Odyssey White steel Tri-Ball SRT

Link to comment
Share on other sites


I only clean my clubs at the beginning of the year and at the end of the year.
In My Bag

Driver: Sasquatch 460 9.5°
3 Wood: Laser 3 Wood 15°
5 Wood: r7 19° (Stiff)Irons: S58 Irons 4-PW Orange DotWedge: Harmonized 60°Wedge: Z TP 54°Putter: Tiffany 34"Balls: Pro V1 Shoes: Adidas Tour 360 IIThe Meadows Golf Coursewww.themeadowsgc.comAge: 16
Link to comment
Share on other sites


I wipe them down with a wet towel usually after a round or two.

However, when I feel like it, I give them a REALLY good cleaning, maybe once or twice a year - this includes metal polish / car polish on the soles and the tops of the irons (not the faces), and toothbrush in a sink or bucket of warm water + detergent. I also fill in chips on the tops of my drivers and woods with a paint pen. I also may take the time to regrip them - I think I'm due for a regripping soon - the irons have stock grips with 3 years on them. I hit some clubs with Winn grips and they were.. quite awesome.

As for polishing the clubs, you might ask why:

The metal polish cleans out impurities that MIGHT rust the metal and gives the clubs a great glossy look. It won't make them look brand new unless you REALLY work on them with a buffer, but I just use a foam applicator and rag. :) The car polish is great for restoring the finish to the paint of the driver, removes ball marks, and smoothes out chips and scratches even though it doesn't help my game AT ALL - it just makes the clubs shiny and especially clean. Don't use the metal polish on your wedges if the wedges have a special finish on them, e.g. Vokey oil cans or CG Black Pearls. Also, don't use the metal polish on the faces of any of your clubs - you'll make the face slick. Just use rubbing alcohol or Goo Gone to clean the faces if you have ball marks on them.
In My TerraFirma Xi Bag:
Driver: R7 460 10.5° Fujikura REAX stock R-flex
3-Wood: Big Bertha Titanium RCH 75w Firm stock shaft
Hybrids: 585H 19.5° 4175 stock shaft
Irons (4-10): Big Bertha TT shaftsWedges: CG12 Black Pearl 52°10, 56°14, 60°10Putter: Studio Select Newport 33"Ball: ...
Link to comment
Share on other sites


I spit on my clubs and use the towel after each shot. I also like to have the kid at the bag drop run a towel over them. But when I'm busting around on public courses for a few rounds in a row, they can get pretty dirty.

I have never found a good way to get into the grooves in between shots. Tees are too fat. If anybody has a quick tip on that, thanks in advance.

What's in the bag
Driver: FTI
3W: 15 Degree
2H: X
4I-7I: X-188I, 9I, PW: X-Forged52 Deg: Vokey Oil Can, all rusted out56 Deg: Vokey, Chrome 60 Deg: Black PearlPutter: Catalina Two

Link to comment
Share on other sites


I spit on my clubs and use the towel after each shot. I also like to have the kid at the bag drop run a towel over them. But when I'm busting around on public courses for a few rounds in a row, they can get pretty dirty.

Either a wire brush, or do what my father-in-law does and break out your trusty pocket knife between holes and dig out the grooves.

On my tombstone: "If this is the worst thing that ever happens to me, I'm doing just fine!"






 

Link to comment
Share on other sites


I spit on my clubs and use the towel after each shot. I also like to have the kid at the bag drop run a towel over them. But when I'm busting around on public courses for a few rounds in a row, they can get pretty dirty.

You need a set of these on your bag:

In My TerraFirma Xi Bag:
Driver: R7 460 10.5° Fujikura REAX stock R-flex
3-Wood: Big Bertha Titanium RCH 75w Firm stock shaft
Hybrids: 585H 19.5° 4175 stock shaft
Irons (4-10): Big Bertha TT shaftsWedges: CG12 Black Pearl 52°10, 56°14, 60°10Putter: Studio Select Newport 33"Ball: ...
Link to comment
Share on other sites


I'm always afraid to use the wire brush. Does it scratch the club face? I don't think I have ever used one on my clubs.

What's in the bag
Driver: FTI
3W: 15 Degree
2H: X
4I-7I: X-188I, 9I, PW: X-Forged52 Deg: Vokey Oil Can, all rusted out56 Deg: Vokey, Chrome 60 Deg: Black PearlPutter: Catalina Two

Link to comment
Share on other sites


I clean my clubs as I go. Playing early in the morning, before the dew burns off, is a good way to keep your sticks clean. Sometimes, if the grooves on my irons get clogged, I have this groove cleaner that looks like a screwdriver, does a great job, and quick, too. But that is rare. By giving my clubs a quick wipe after every shot, my clubs never get that dirty so I never really have to take extra time and effort to clean them.

in the bag:
driver-titleist D2 10.5* w/aldila nv shaft
3-adams speedline fast 10 w/aldila shaft
hybrid-titleist 585 17* w/aldila shaft
irons-titleist 735cm w/ttdg s-300 shafts

wedges-cleveland 588, 53* and 60* w/ttdg shafts

putter-scotty circa 62 #1, gun metal finish

ball-pro v1

shoe-dryjoys

Link to comment
Share on other sites


I'm always afraid to use the wire brush. Does it scratch the club face? I don't think I have ever used one on my clubs.

The brush is brass.. The club face (should be) stainless steel..

Think of a copper bullet going down the steel barrel of a gun. The softer metal is going to take the damage. At least thats the theory.. Now, any place that is a mirror finish, like the back of the clubs, I use a plastic brush because the brass bruch *could* (not likely but *could*) dull out the mirror finish.

On my tombstone: "If this is the worst thing that ever happens to me, I'm doing just fine!"






 

Link to comment
Share on other sites


You need a set of these on your bag:

Yep.. Those are the ones I carry...

On my tombstone: "If this is the worst thing that ever happens to me, I'm doing just fine!"






 

Link to comment
Share on other sites


After every shot. I use a thing called a Groove Tube, plastic bottle with a plastic brush mounted on the top of it. You fill it with water, as you brush the club head with the top, water comes out and cleans your grooves. Then just wipe it dry with a towel. Maximum groove action on every shot! I picked it up at an off course golf store. Great buy.

Driver: TaylorMade r7 460 / 11.5 degrees
Irons: Titleist 822 OS (4, 5, 6)  Titleist 962 (7, 8, 9, P, G)
Putter: Tear Drop
Ball: Precept Laddie
Wedges: Golfsmith Snake Eyes 56 degrees / 60 degrees

18 Hole Low:  67   /  9 Hole Low:  31

Link to comment
Share on other sites


Note: This thread is 5797 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Popular Now

  • Posts

    • It depends on what you mean by "while the core remains still" I wouldn't consider his core "remaining still" here, DJ's abs, belly button, and belt buckle have rotated almost 90 degrees by the top of the backswing. Those components of his core then have to rotate/uncoil on the downswing. Far from remaining still IMO.
    • It’s going to change but your basic setup feel should be about the same. Your body kind of adjusts to length and lie angle of the club. You’ll want to pay attention more to ball position as you change clubs more than how bent over you are. I understood what you meant from what your wrote.
    • Oh I probably was thinking the wrong thing or the wrong way when I typed the golf swing was more of a body swing (in my mind).  The in my mind part probably should have said in my opinion or based on what I have read.  Just meant the body needs to be involved more than the hands and swinging the arms while the core remains still.
    • The answer to this question is a very small change in impact can cause a BIG impact in direction. This is with the driver, but its similar with the irons... How much does an open or closed clubface affect your drives? | RoboTest Want to hit more fairways? The latest edition of GOLF's RoboTest highlights the importance of driver face angle. For a driver, 1 degree of clubface open or shut causes 10 yards of left or right. When you think the rate of closure for a golf club, how fast the club face goes from open (top of the golf swing) to square (at impact), 1 degree is a small quantity.  This means, when you are looking at video of your swing, you can see the exact same swing, but present the clubface in two widely separate positions. More so if you have swing faults. You can make the same backswing, but not get your weight forward well and hit a fat shot. You then react to this, try not to fat it so you thin it. Maybe the timing is off on the extension part of the downswing and you thin it slightly. Also, certain swing movements cause the wrists to flip at impact. The intent is still to hit the ball with the club. So your hands are going to adjust to find the ball. The more they have to adjust, the more difficult it is to repeat. Nope, it is way less mental than physical. If we could all think our way to a better swing, we would all be PGA tour players.  #GOLF IS HARD!  Beginners have repeatable swings, just bad repeatable swing. We all just need to make repeatable better swings.  The golf swing is a battle of making movements that allow the club to do good things. You results are from a bad swing that has a wider range of outcomes. Your outcomes are probably the following. Way more thins, fats, skulls than most. You hardly see PGA Tour players fat, skull or thin a shot.  The first principle of golf is FEEL IS NOT REAL. Meaning, we can feel things in the golf swing, yet it produces results or shows on video as something else.  You just set up to the ball. The club has a different length, so you need to adjust. For most your arms extend more out as you have a longer club. You also bend over less for longer clubs. It is just something you get used to. If you make a fist and stick your thumb out. You want that width from the butt end of the club and your belt buckle. Now, if you taller or shorter than most, then you may need to adjust the length of your clubs.    
    • At address? I think so. Downswing and through? IDK. I doubt if a whole lot of golfers, if any at all, deliberately think "I have a 9-iron so I need to bend half an inch more through the downswing compared to my 8 iron". 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...