Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6421 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

0  

  1. 1. How high do you tee a ball for your driver (relative to driver resting on ground)?

    • Bottom of the ball at the top of the clubface
      39
    • Center of the ball at the top of the clubface
      252
    • Top of the ball at the top of the clubface
      38
    • Center of the ball at the center of the clubface
      23


Recommended Posts

Posted
I tee it up average height; I would say, probably about 1/4 of my ball is above my driver head, if the club is sitting on the ground at address.

I'm also here to agree that the "average, good golfer" hits it much farther than 220. I know most people inflate their driving distance, but I'm here to tell you that, I'm 6', 190 lbs, athletic and a good, but not great golfer: I can assure you, if ANY of my drives only went 220, it was a severe mishit or a pop-up. My dad is 64 yrs old and, while he's in great shape for his age, has a very inefficient swing, usually cuts, sometimes weak fades it. As long as he makes clean contact and doesn't overspin it, he'll knock it out there 200, and I think he's currently running a 20 index or so.

Nothing in the swing is done at the expense of balance.


  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

Posted
I tee it up the center of the ball in the top of my driver. I like my driver ball with a mid/high trayectory. I can hit it betwen 280 and 290.

What is in my Ping bag:
Driver: R7 425 9.5*Fujikura Vistapro 70 stff
3Wood: An old 15* Graphite Stiff.
5Wood: R7 ST 18* Mid point RE-AX 70 Stff
7Wood: Tight lies 21* Graphite StffIrons: An old set of EYE2+ 4-PW Steel StiffWedge: vokey SM 54*10 and 60*08Putter: Studio Style Newport 1.5Balls...


Posted
Maybe I'm just speaking for myself here...but whatever, I'll continue. With as deep as many of the faces on drivers are these days, you have to tee the ball really high to make contact with the ball on the sweet spot or even about a quarter inch above the sweet spot (the whole high launch low spin thing) and not feel like you're going to hit the ground in the process

Posted
I used to tee the ball up high, center to bottom of the ball at the top of the club face. But with in the last few months I have moved the tee a little bit down. So the top of the ball is inline with the top of the club. And I have had much better control and consistency. Not like I was slicing or hooking the ball before but just lowering the ball helped me control the ball a little better.

A typical drive for me is between 280-300. And lowering the ball had no real effect on the distance.

Driver : SQ Sumo 5000 9.5˚ VS 65 proto
3 Wood : V steel
Irons : MP-32 3-PW
Wedges : R-series 56˚ & 60˚
Putter : Tri-Force 2Ball : Pro V1x


Posted
I'm with the majority on this one, teeing it with half the ball above the crown and aiming to sweep it away slightly on the upswing.
In my bag

Superstrong 12*
- Firepower Hyper Ti 15*
- Launcher 18* Hybrid - 21* Hybrid - S2 Max 5i - SW - MP T-Series 47* - 60* LW - White Hot XG #1

Posted

I recently started to tee it a little higher, so that 75% of the ball was above the driver if I were to ground my driver at address. Looking for more carry distance, but my accuracy has suffered. Not that my driving was ever THAT accurate but I'd get hot every now and then and start striping them...but now they are pretty wild. Longer, but wild.

I think I might lower down to where I feel most comfortable, about half of the ball showing above the driver head, maybe even slightly lower.

Edit: Oh, and here we go again, another thread where everyone hits the ball at least 280....always. Amazing!


  • 4 weeks later...
Posted
I tee the ball so that the center of the ball is a half inch below the top of the clubface. This makes it is impossible to pop up the ball. And if I swing properly I hit the ball in the center of the clubface instead of above it like some people suggest.

  • 1 month later...
Posted
I've starting teeing it up around half the ball above top of club, trying to make contact on the start of the upswing as opposed to hitting down on it.

In my BX56:

Driver: 200 Steel 8.5
3 Wood: 200 Steel
Irons: SS Oversized 3-PWWedges: 588rtg 60* Putter: TPi-26Ball: <-----Pro V1x----->


  • 1 month later...
Posted
I tee the ball with the center of the ball just above the center of the clubface. I really don;t have a reson why besides the fact that it is how I have always done it and can't get used to anything else.

Monster Tour 10.5* w/ Redboard 63
FP400f 14.5* w/ GD YSQ
Idea Pro 18* w/ VS Proto 80s
MP FLi-Hi 21 w/ S300
CG1 BP w/ PX 6.0 SM 54.11 SM 60.08 Sophia 33"


Posted
I tee the ball with the center of the ball just above the center of the clubface. I really don't have a reson why besides the fact that it is how I have always done it and can't get used to anything else.

Monster Tour 10.5* w/ Redboard 63
FP400f 14.5* w/ GD YSQ
Idea Pro 18* w/ VS Proto 80s
MP FLi-Hi 21 w/ S300
CG1 BP w/ PX 6.0 SM 54.11 SM 60.08 Sophia 33"


  • 3 weeks later...
Posted
My setup is center of the ball to the center of my R7 Quad. However I do not ground my club at setup. The path at follow thru is usually on the up slope by the time impact of the clubface and ball meet. This gives me an average of 270 carry with a 107 mph club speed.

Taylormade Superquad 9.5
Taylormade hybrid 3, 4,5
MP-57 5-P
Cleveland 56 & 60
Scotty Cameron PutterPro V-1


Posted
I tee up the ball so that the top of my driver is in line with the bottom of my ball. I regularly drive the ball around or over 300. Its unusual that I drive the ball shorter than that if I hit it pretty well. I am guessing I get 10-15 yards of roll. I tee the ball in the middle of my driver face if I'm trying to keep the ball down in the wind.

TaylorMade R11S TP Blur 60 X
TayloreMade R11S TP Blur 70 X

Titleist 910H 21&24
Miura Tournament Blades 5-PW DGX100 Tour Issue
Cleveland CG16 52

Miura Black Wedge 56, 60
Newport 2 Teryllium Ten

Titleist ProV1x


Posted
i have the logo of the ball halfway between the top of the clubface and over.

So like on my drive i would have half of my ball touching the clubface and the other(top) half above the club.
I use the logo as a guidline.

In my Warbird Bag,
I have
Burner Driver 460cc 9.5* Stiff
Three and Five Woods
Precise- 21* and 24* hybridsCCi Cast Irons-4-AW 52* and 56*/14 Vokey 60*/8and i play TP Black or ProV1


Posted
I tee the ball up high with the driver as I seem to be more accurate. Sometimes I tee it even higher than that and it's a little too high and I'm catching the ball too high on the club face and I lose a little distand. But getting the bottom of the ball to the middle of the clubface is ridiculously low.



3JACK

Posted
I tee the ball center above the crown. Reading, again, all these prodigious driving distances brings to mind Frank Thomas who has done many tests on driver distance. Average length is about 185 and almost 100 percent of the the hundreds tested all over the country, at all skill levels, were at least 20 to 30 yards consistently shorter than their stated distances. At my club (sea level) with all skill levels, on one 300 yard par 4, few carry it beyond the 100 yard marker which is all carry, no roll due to the mound loaded fairway and usual breeze in your face. We all tend to dwell on our best hit.

Note: This thread is 6421 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.