Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5919 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
So i'm gonna buy a new wedge, can't decide what loft.
i have a 53 right now and my i3 pw
should i get a 56 or a 58?

My Clubs:
Ping I3 + blade 3-pw
9.5 09 Burner with prolaunch red
Nickent 4dx driver
Taylormade Z tp 52, 56, 60
YES Carolyne putter


Posted
what degree is your pitching wedge? Im going to take a stab at it and say get the 56 and have it bent to 57

Kyle Paulhus

If you really want to get better, check out Evolvr

:callaway: Rogue ST 10.5* | :callaway: Epic Sub Zero 15* | :tmade: P790 3 Driving Iron |:titleist: 716 AP2 |  :edel: Wedges 50/54/68 | :edel: Deschutes 36"

Career Low Round: 67 (18 holes), 32 (9 holes)

Awards, Achievements, and Accolades

Posted
I'd say get the 58. I have a 52/58 set-up and I have no gap problems and can hit any shot that I need so a 53/58 should work just as well.
In the blue and tan grom Bag:

Driver r7 460 10.5*
Fairway Woods '07 Burner 15* and 18*
Irons 4-PW r7 XDWedges 47*, 52*, 58* CG14,Putter TiffanyBall One Tour D

Posted
the PW is a 47
so
47 53 58?
or 47 53 56 60?

My Clubs:
Ping I3 + blade 3-pw
9.5 09 Burner with prolaunch red
Nickent 4dx driver
Taylormade Z tp 52, 56, 60
YES Carolyne putter


Posted
58....that should work

Kyle Paulhus

If you really want to get better, check out Evolvr

:callaway: Rogue ST 10.5* | :callaway: Epic Sub Zero 15* | :tmade: P790 3 Driving Iron |:titleist: 716 AP2 |  :edel: Wedges 50/54/68 | :edel: Deschutes 36"

Career Low Round: 67 (18 holes), 32 (9 holes)

Awards, Achievements, and Accolades

Posted
thinking a 58 degree CG RTG DSG

My Clubs:
Ping I3 + blade 3-pw
9.5 09 Burner with prolaunch red
Nickent 4dx driver
Taylormade Z tp 52, 56, 60
YES Carolyne putter


Posted
I have a PW 47º - 52º - 58º setup and find it works very well.

Use both the wedges for chipping, flopping and out of bunkers. I rarely lay up inside of 100 yards, so I can take full swings with my 52º on the approaches.

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Awards, Achievements, and Accolades

Posted
I've been playing just a 46 and 56 for the last few seasons, but I decided to add a 52 and 60 to my bag for this season. I wish I would've put the 60 in my bag a long time ago.

So, I'd say the 58.

Driver: Cleveland Launcher DST

Hybrid: Cleveland Mashie 3H

Irons: Cleveland Launcher

Wedges: Cleveland cg 15 46, 52, 56, 60

Putter: Odyssey tour black

Ball: Titleist NXT Tour


Posted
I to vote for the 58*.. I have played a 58* for years and love it...

In my bag:

Driver: 905R Proforce V2 S76 10.5*
3Wood: 906F4 Aldila vs proto S80 15.5*
Hybrids: 585H Project X 6.0 21*Irons: AP2 4-PW Project X 6.0 4-6 bent 2* weak 7-PW bent 1* weakWedge: SW SM53* bent from 56* (custom grind by me) DG S200 Wedge: LW SM58* bent from 60* (custom...


Posted
I would say pick the loft based on the distance you are looking for, if you hit a 56 100 yards and that is a good layup distance for you, go that route, if you hit a 58 80 yards and that is a good layup distance go that route.

Craig 

Yeah, wanna make 14 dollars the hard way?


Posted
Do you like to do short flop shots on a regular basis? If so, then I'd go with the 58*. If you don't, then I'd go with the standard sand wedge degree of 56*. You can just open up the face when you want to do flop shots.

What I Play:

Driver: R9 460
4 Wood: G15

Hy: Callaway FT 3Hy

Irons: AP1 4-PW

Wedges: Vokey 52* & 60*, Mizuno MP-T 10 58*

Putter: Newport Studio Select 2.7

Ball: Nike One Vapor


Posted
Yeah i'm more of a flopping person even though i'm not perfect at it yet. But when i think of shots i visualize high shots opposed to low hop hop stop ones.
Lately i've been hitting pretty long and i'm always in this dead zone of clubs wehre my gap is like 90-110 since its all i have but i'm always in the 60-80 yard range where i have no club

My Clubs:
Ping I3 + blade 3-pw
9.5 09 Burner with prolaunch red
Nickent 4dx driver
Taylormade Z tp 52, 56, 60
YES Carolyne putter


Posted
I think a 56 is easier to hit out of the fairway. I had a 58 once and went to the 56 & 60 setup and haven't looked back since. Obviously that's just personal. If I had any big gaps at the top end of my bag, I'd drop the 56 & 60, get a 58, and fill the gap up top. So the point is that my opinion towards a 56 isn't all that strong. Most people who have a 58 handle it just fine. For 60 yards, a 58 is nice. For 80, the 56 would probably be better.

What's in my Sun Mountain C-130 bag:

Driver - Taylormade Superfast 2.0 TP 10.5
3 Wood - Taylormade Burner 15* REAX
Hybrid - Adams Idea Pro 18* GD YSQ-HL

Irons - Callaway X-18 4-PW

GW - Cleveland 588 51*

SW - Cleveland CG 12 56*

LW - Cleveland CG15 60*

Putter - Cameron Studio Style Newport 2

Bushnell Medalist rangefinder


Posted
try a few and look at the distance that you are hitting them and determine the yardage that you are looking for....whichever is the closest would be the one that I would buy.
If you always do what you've always done....You'll always be where you are right now..
Driver: C830.2 HOF Taiwan Proto
3 wood: Versus VS 1 Proforce V2
7 wood: DCT Fujikura Motore F1
3-pw: Nakashima NX-1 Project X 6.5 53*: ...

Posted
i play a 52 56 60, seems to be a good split in lofts for me, check and see what your PW loft is and go from there

Superlight Stand Bag
909D2 9.5° Diamana S
909F2 15.5° Diamana S
909F2 18.5° Diamana S
AP2 Project X 5.5 3-PW Vokey Spin Milled 52° 56° 60° Studio Select Newport 2 Pro V1Home Course - http://www.huronoaks.com (Home of Mike Weir)


Note: This thread is 5919 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.