Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 1389 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

  • Moderator
Posted
Does anyone have a trick for separating double-sided tape from its backing? It sounds simple enough, but this is the part of regripping that takes the longest for me. I usually have to use a razor knife and get the tip between the tape and backing (and that isn't easy). There must be a quicker way ... ??? Or did I just get some cheapo defective tape to start with. Thanks!

Outside of a dog, a book is man's best friend.
Inside of a dog, it's too dark to read.
--Groucho Marx

Awards, Achievements, and Accolades

Posted
If you do enough grips then get a tape dispenser from Golfsmith or Mitchell golf, it'll run you about $110 but it'll save a lot more in headaches.

Otherwise, the razor blade will work or try ripping the tape at a different angle, alot of times that will great a little gap for you to work with.

You last option would be to get individual strips , they have a seperator already.
Awards, Achievements, and Accolades

Posted
Does anyone have a trick for separating double-sided tape from its backing? It sounds simple enough, but this is the part of regripping that takes the longest for me. I usually have to use a razor knife and get the tip between the tape and backing (and that isn't easy). There must be a quicker way ... ??? Or did I just get some cheapo defective tape to start with. Thanks!

georgep,

In addition to what Everado said, the only thing I can add is barely seperate a corner of the tape before applying it to the club. That way you will have it "started."

Posted
After I have started I would leave a small portion of the backing overhanging, I start taping at the bottom of the grip and then begin removing the tape.

I basically do the same thing. I just peel the backing a little farther than the next piece, rip it off, unless you are using the old style narrow tape? One time I was out of solvent but I wanted to get the clubs ready so that after I got some I could regrip really quickly the next day (leaving for a vacation). Took the old tape off without solvent, I will never do that again.

1W Cleveland LauncherComp 10.5, 3W Touredge Exotics 15 deg.,FY Wilson 19.5 degree
4 and 5H, 6I-GW Callaway Razr, SW, LW Cleveland Cg-14, Putter Taylor Made Suzuka, Ball, Srixon XV Yellow


  • Moderator
Posted
Thanks all! I don't grip all that many (mine once a year minimum and the wife's a little less often than that), so the dispenser doesn't make financial sense.

I was hoping someone had a cool little trick that I hadn't thought of. I am going to try to peel a little more of the backing next time and see how that works.

btw, ALLIN -- I've always used the two inch tape. I think the narrow tape would drive me nuts.
  • Like 1

Outside of a dog, a book is man's best friend.
Inside of a dog, it's too dark to read.
--Groucho Marx

Awards, Achievements, and Accolades

  • 5 weeks later...
Posted
when you regrip the clubs put the tape on the club and leave the backing on... then take and peel the backing off of the tape and just cut the sticky part... this is how i do it at work and i think that it is definately the best way to do it... i don't use a dispenser and it works awesome for me... hope this is the TIP you wanted
Driver: Titleist 983k 9.5 Fujikura Pro 95 Stiff
3 Wood: Taylor Made V Steel Stiff Flex
Hybrids: 2 & 3 Tour Edge Iron Woods X-Stiff Steel
Irons: 4-PW Tour Edge Progressive Irons X-Stiff Steel
Wedges: Taylor Made Fe2O3 56, Cleveland Tour Action 588 60 Low BouncePutter: Ping G5i UG-LE Ball: Bridgestone...

Posted
Over the years I've used a lot of different tape and the brand of tape you use does make a huge difference. Lately I've been using tape from GolfWorks (not GolfSmith). I'm able to peel the backing off just using my fingernail. Much easier. But then I also use 3/4" tape spiraled up the shaft.

Jack Waddell
The Sand Trap .com

In My Bag (for now):TaylorMade Burner 9.5 REAX 50 stiffBobby Jones 3W, Fuji TP 26.3 stiffAdams Idea Pro 2, 3, 4 Iron hybrids, Aldila VS Proto stiffAdams Idea Pro Forged 5-PW, TT Black Gold stiffTitleist Vokey 252.08 Tour ChromeTitleist Vokey Spin Milled 58.08...

Awards, Achievements, and Accolades

Posted

Try growing some finger nails.

I usually have my wife do it when I bite my nails down too low or if I have nitrile gloves on already.

  • Like 1
Current bag:
Driver: TaylorMade 9.5* R-510
3-wood: TaylorMade 15* r7 TP
Hybrid: Nickent 3DX Ironwood
Irons: Hogan FTXWedges: 52* Hogan Riviera | 56* Cleveland TA 588 | 60* Hogan CarnoustiePutter: Cameron Detour 2Ball:NXT

  • 9 years later...
Posted

I just found out to just roll the tape with your thumb and it will start to peel and roll.  Then you carefully pull it upwards and it might save you little time.


Posted

I try to just get a little bit of my razor into the tape to where I know I'm not touching the shaft. After that all you basically have to do it just a start peeling away. Took me no more than 2 minutes to get the old tape off my wedge. 


Posted

Rub hard on the tape to make sure it's solidly on the shaft. Then take a very small screwdriver and scratch at the tape so the backing starts to come off. It's not difficult. 


  • 3 years later...
Posted
4 hours ago, Guzman said:

stick a small piece of duck (duct) tape to the backing and then pull it from there.

Hopefully after 14 years he figured it out....😁

  • Like 1
  • Thumbs Up 1

:ping: G25 Driver Stiff :ping: G20 3W, 5W :ping: S55 4-W (aerotech steel fiber 110g shafts) :ping: Tour Wedges 50*, 54*, 58* :nike: Method Putter Floating clubs: :edel: 54* trapper wedge

Awards, Achievements, and Accolades

  • Moderator
Posted
8 hours ago, Vinsk said:

Hopefully after 14 years he figured it out....😁

He’s been sitting by his computer in the basement waiting for the right response. He can live his life now!

  • Like 2

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Awards, Achievements, and Accolades

Posted
On 8/17/2006 at 10:27 PM, georgep said:

Thanks all! I don't grip all that many (mine once a year minimum and the wife's a little less often than that), so the dispenser doesn't make financial sense.

I was hoping someone had a cool little trick that I hadn't thought of. I am going to try to peel a little more of the backing next time and see how that works.

btw, ALLIN -- I've always used the two inch tape. I think the narrow tape would drive me nuts.

My trick?

I stopped using sticky tape 2 years ago, I now "blow" on my grips and haven't looked back since.


  • 1 year later...
Posted

a simple way to seperated golf tape---- Get a piece of hard plastic ~ 3" x 4" x 1/16" ( I use a piece of smooth plastice I use for a spreader on fiberglass repairs on my boat).  I use 2" wide tape from Golf works .  I do all my clubs at the same time .  Remove the grips , remove all the old tape and wipe clean any tape residue with grip solvent, Mark the length of the grip on the shaft, apply the tape and cut to length on the shaft - only stick about 1/2 the of the tape down, take the hard plastic and stick the tape on the plastic (don't press hard) - take your finger nail and seperate the tape on the corner nearest to the head of the club and pull the backing off.   I have short fingernails and have 0 problems .  Smooth the tape down on the shaft.  Do all the clubs first then put on your gloves and put all the grips on.  You will only have to use one pair of gloves and will protect your hands from the solvent 


Note: This thread is 1389 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.