Jump to content
Note: This thread is 5341 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Ok. was just on mizuno website only to find out that the clubs i bought were 2-2.5 degrees flatter than the majority of the other companys???????????? Why??????? Are they built for 6'4" players only??hahaha
Well just dropped off my set to have them bent more upright. Will let yall know.

Ping G15 9 degree
Ping G15 4 wood 17 degree
Ping S56
Ping Tour S 52,56,60
Nike Method 01Pro V


Why didn't you look at that before you bought them? Would seem to be an important piece of information.

There is no set loft/lie/length for clubs, every manufacturer seems to have their own way of measuring. It might even be that the other people have gone upright more and Mizuno either hasn't caught up or don't want to. I think over the years the lie angles have slowly gone up a degree or two. My 10 year old set of Mizunos that were 2º upright at the time are now almost standard.

I will judge my rounds much more by the quality of my best shots than the acceptability of my worse ones.


Ok. was just on mizuno website only to find out that the clubs i bought were 2-2.5 degrees flatter than the majority of the other companys????????????

Not a news flash - pretty commonly known in the golf world. It's Simple. Mizuno is a Japanese company. The average height for a Japanese man is 5 ft 7.5 in. Thus, a flatter "standard" lie angle. The average American man is 5 ft 10 in. So most American companies have a more upright standard lie angle.

driver: FT-i tlcg 9.5˚ (Matrix Ozik XCONN Stiff)
4 wood: G10 (ProLaunch Red FW stiff)
3 -PW: :Titleist: 695 mb (Rifle flighted 6.0)
wedges:, 52˚, 56˚, 60˚
putter: Studio Select Newport 1.5


  • Administrator
Ok. was just on mizuno website only to find out that the clubs i bought were 2-2.5 degrees flatter than the majority of the other companys???????????? Why??????? Are they built for 6'4" players only??hahaha

You have that backwards, btw. Clubs are usually flatter for shorter players.

And better players tend to prefer a slightly flatter club anyway.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Mine were too upright when I got them so I had each iron bent 1-2 degrees flatter. Hitting them much more solidly now.
In my Hoofer:

G15 Driver 9° | Accra Classic SE stiff
Cleveland Hi-Bore 3W 15° | Accra Classic SE stiff
MP-57 3-PW | Rifle flighted shafts 6.0 Spin Milled 52-08 |Black Nickel | True Temper Dynamic Gold Spin Milled 56-08 |Black Nickel | True Temper Dynamic Gold Black Series I#9 putter Pro V1x

I just got Mizuno mp 68 irons would a flat lie angle promote a hook? because lately i have been hitting a high hook that starts at the pin then lands on left side of green.

I just got Mizuno mp 68 irons would a flat lie angle promote a hook? because lately i have been hitting a high hook that starts at the pin then lands on left side of green.

No. Too upright - the heel's gonna dig in, turning the club in at impact = pull/hook/"trap draw!!"

Too flat - the toe's gonna dig in, and you'll hit a weak shot and miss right.

driver: FT-i tlcg 9.5˚ (Matrix Ozik XCONN Stiff)
4 wood: G10 (ProLaunch Red FW stiff)
3 -PW: :Titleist: 695 mb (Rifle flighted 6.0)
wedges:, 52˚, 56˚, 60˚
putter: Studio Select Newport 1.5


To know the lie angle you should use, use the tried and true method of a special tape on the sole and hitting full real shots off a (normally) thin plastic flat board, You can hit a shot and look immediately at the tape to see exactly how your shaft and clubhead combined at impact. I don't think you can make such a decision about your lie just by soling the club and looking at it statically. Typically, the clubhead toe deflects downward due to the shaft bend when you make a full swing so if your club soles perfectly at rest, the odds are it is not right when actually hitting a shot. That is what I've always been told.

RC

 


  • Administrator
No. Too upright - the heel's gonna dig in, turning the club in at impact = pull/hook/"trap draw!!"

That's not why. The toe and heel will dig in, but that's after impact, not before impact.

A club that's too flat, due to the loft, will send the ball to the right. Take your pitching wedge and hold it so the shaft is vertical - where's the face pointing? Up and to the right. Now hold it so the shaft is horizontal - where's the face pointing? 45 degrees left. That's why - it has nothing to do with the heel or toe digging in.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Just to follow up......ive always pushed my irons slightly but with pure contact for about 6 years when i moved to mizuno's. love the feel. never even once thought to check the lie angle!!! moved it 2 degrees upright and was on target everytime. hit a couple fat shots but over all t was the best 30 dollars spent. got pretty sun burned so i wont be playing again for a few days.

Ping G15 9 degree
Ping G15 4 wood 17 degree
Ping S56
Ping Tour S 52,56,60
Nike Method 01Pro V


Anyone who buys a nice set of Mizzy's (or any other nice clube for that matter) and doesn't get fitted is just asking for trouble. Yes, you can save a few hundred bucks by getting standard setup off eBay, but isn't that money worth the better shot making and enjoyment of the game?

Driver: taylormade.gif Tour Burner 9.5*
4 Wood: taylormade.gif200 Steel 16*
Irons: taylormade.gif Burner '09
Wedges: taylormade.gif RAC TP Satin 54*, 58*
Putter: odyssey.gif White Hot Tour #9  Ball: bridgestone.gif B330


Note: This thread is 5341 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...