Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5506 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
So what do you all do w/ the 1-3' "tap in" or "gimme" putts.

I'm a good putter but I sometimes miss these putts and its irritating. I've been using my standard putting setup and stroke but feel like is should lean on one leg, open up the body, and just "tap" it in!?

Driver: Taylormade r7
Irons: Mizuno MX-200
Wedges: 60*8 & 56*14*
3,5 wood: r7
Putter: Odyssey white ice


Posted
I use the line on the ball if it is anything really over a foot or so and i'm pretty firm. I play a game on getting up and in and take it seriously so I get these alot and really just focus on a good aggressive stroke and hit it in the back of the cup.

Brian


Posted
I've struggled with these too, especially on breakers. If it's a straight putt, the confidently put it at the back of the hole with a solid stroke.

Where I can get in trouble are the putts that may have 2-3" of break in them. For me, it's very important to pick a line and trust it. Once I've decided on the line, focus on the stroke and following through on the intended path rather than allowing your eyes to wander toward the cup.

In the Bag: TaylorMade R11 TP - TaylorMade R7 TP TS - Cleveland Halo - TM TP 2009 3-PW - Vokey SM 52 - Vokey SM 60 - Rife Barbados CS - ProV1x 


On the Computer:  Analyzr Pro 
 


Posted
My putting technique is to read the break and incline and choose a spot to try to hit the ball to as if I were on a perfectly flat green, so downhill left breaker I'm trying to find the spot towards me from the hole that if I pretend the green is flat and I wanted to hit it in the hole there then it'll break and accelerate to the real hole.

So given that, I generally use the same mechanics as a normal putt except I pick a spot past the hole to aim at. Basically, unless it's significantly down hill, I'm trying to hit it fast through any touchy break and just ram it in the back of the hole. Unless there's extreme break, I'm trying to hit it hard enough that I can aim inside the edges of the cup.

Matt

Mid-Weight Heavy Putter
Cleveland Tour Action 60˚
Cleveland CG15 54˚
Nike Vapor Pro Combo, 4i-GW
Titleist 585h 19˚
Tour Edge Exotics XCG 15˚ 3 Wood
Taylormade R7 Quad 9.5˚

Awards, Achievements, and Accolades

Posted
For me, the key is to avoid the urge to rush an "easy" tap-in when I'm not the last one to hole out. If I don't take the time to set up well and give it a good stroke, odds are I'll miss it. For the 1-footers it's not so bad, but if a 3-footer looks like it might be trouble, I think that's a long enough putt to give some respect. This is particularly true if you're going to be contorting your stance not to scratch up someone's line. If you're going to need a minute to read it and set it up, don't be too shy about passing up the "just clean it up" offers you'll inevitably get. Obviously if it really is just a tap in, just clean it up, but ready golf shouldn't mean sloppy golf.

Once every few times I hit the practice range, I like to practice a large number of tap-in putts. Usually I just pick a hole and try to sink at least 10, sometimes 30 or more, in a row. When practicing short putts, I find I *must* take the pin out of the cup or it's not a useful drill. Knowing that you just spent 10 minutes making 29 in a row and that you can move on to something if you just sink the 30th puts some pressure on you for that last one. I suggest making it a 3-footer with a little break.

In the bag:
FT-iQ 10° driver, FT 21° neutral 3H
T-Zoid Forged 15° 3W, MX-23 4-PW
Harmonized 52° GW, Tom Watson 56° SW, X-Forged Vintage 60° LW
White Hot XG #1 Putter, 33"


Posted
If there is only one thing you can practice before your round, it better be the three foot putt. There is no other shot in golf that can piss me off quicker than missing one of these, especially a straight one. I try to take my time, follow my routine, keep down through the putt and listen for it to go in.

Today, I went to the range and the first thing I did was hit about 15 3 footers and then moved to 6 and 10. Then I hit balls and then chips and pitches. Finally I hit the ten footer and then ended with making a bunch of three footers. I do this regularly because they are that important.

Callaway AI Smoke TD Max 10.5* | Cobra Big Tour 15.5* | Rad Tour 18.5* | Titleist U500 4i | T100 5-P | Vokey 50/8* F, 54/10* S,  58/10* S | Scotty Cameron Squareback 1


Posted
Lots of good advice. You must practice these a lot if youu want to feel comfortable with them. When I have these shots, I only have two thoughts: inside the hole and firm.

In my Bagboy cart bag:
Driver: TM R11s 10.5 R-flex 3W: TM 09 Burner 3H: TM 09 Burner Irons: TM Tour Burner 4-PW r-flex
Wedges: Wilson TW9 GW, Ping Eye 2+ SW, Vokey SM 58.08      Putter:TM Rossa Spider Ball: TM TP/Red LDP, TF Gamer v2   Range Finder: GX-I


Posted
Well only putts that I tell myself to stroke firm are the uphill putts. All other putts I don't really think about the distance, just try to visualize where the ball will roll in. Visualization works wonders in all facets of sports and golf is no exception.

On short putts, I try to come through the ball because my misses in the past have been to the right because I leave my putter hanging. So I make practice strokes to make sure I am finishing through the ball. A 3' putt is no gimme and has every right for me to take my time and give it my full attention. Missing a 2-3' putt is not fun and can effect you mental game so I never take them lightly. Don't put more pressure on yourself because the putt is a SHOULD MAKE but putt as if it were like any other putt.

I don't practice putting as much as I should but feel very confident in putting. I spend most of my time practicing my chip shots (bump n runs) because most of my misses are quite close to the green which have me chipping to get up and down.

« Keith »


Posted
Clock drill. Pick a hole and plant tees about three feet from the lip at 12- 3-, 6- and 9 o'clock. Place a ball next to each tee and make all four putts. Retrieve balls and repeat. You can make it into a game if you like. Some people set a target number to make without missing (30, say, or 100 if you're Phil Mickelson) and if you do miss you go all the way back to one and start again. This adds a little authentic pressure. I generally just pick a total and then stay there until I've made that many and my stroke feels good.

Stretch.

"In the process of trial and error, our failed attempts are meant to destroy arrogance and provoke humility." -- Master Jin Kwon

Awards, Achievements, and Accolades

Posted
If there is only one thing you can practice before your round, it better be the three foot putt. There is no other shot in golf that can piss me off quicker than missing one of these, especially a straight one. I try to take my time, follow my routine, keep down through the putt and listen for it to go in.

Couldn't agree more. The most important shot in golf. It makes getting up and down easier, makes trying to hole putts easier as not fearing the comebacker, keeps momentum in the round.

Brian


Posted
thanks for all the advice.

I'll definately practice sinking about 30 of them in a row to build my confidence and memory. I feel thats what i lack w/ these short putts, the confidence. I tend to think "if i putt too hard and miss, I will have an even longer putt coming back". <-- actually, that's exactly what my problem is.

Driver: Taylormade r7
Irons: Mizuno MX-200
Wedges: 60*8 & 56*14*
3,5 wood: r7
Putter: Odyssey white ice


Posted
resquare your clubface until it looks right.

Driver: Nike Ignite 10.5 w/ Fujikura Motore F1
2H: King Cobra
4H: Nickent 4DX
5H: Adams A3
6I 7I 8I 9I PW: Mizuno mp-57Wedges: Mizuno MP T-10 50, 54, 58 Ball: random


Posted
resquare your clubface until it looks right.

This won't help much if your eyes are way inside or outside the ball at set up, as then what looks right will actually be to the right (or left) of the hole.

Anyway, that's the empirical view. There's also a school of thought that says just free your mind and the ball will drop. They would say to putt the short ones as if they're already conceded. Step up, pick a small target on the hole (a blade of grass on the lip, or scuff at the back of the cup), fix that in your mind and just pop the putt at it with no conscious thought of stroke mechanics. YMMV.

Stretch.

"In the process of trial and error, our failed attempts are meant to destroy arrogance and provoke humility." -- Master Jin Kwon

Awards, Achievements, and Accolades

Posted
So what do you all do w/ the 1-3' "tap in" or "gimme" putts.

I play them exactly the same as any other putt. I don't see any conceivable reason why I should do it any different. If you are otherwise a good putter, then it's strictly a mental thing. If you have trouble with putting in general, then maybe you need to consider that entire aspect of your game.

A few years ago I got a case of the yips. 3 feet was a guaranteed 2 putt, maybe even a 3 putt. My solution was a different style of putter, switching from a heel shafted Odyssey blade to a center shafted high MOI putter from Golfsmith components. That putter is still working for me. But I don't know you, don't know if that would have any meaning at all for you. My point is to try some things.... maybe a lesson... different setup, different grip, different putters.... experiment. With putting you never know where the answer might come from.

Rick

"He who has the fastest cart will never have a bad lie."

Awards, Achievements, and Accolades

Posted
Hit it hard and never give up the hole unless there is an extreme slope in the 3' range. The good thing about a short putt is that if it is near the center of the hole it should go in unless you hit it 10 times too hard. Don't try and baby it. Hit it like you mean it.

This works about 90% of the time. Sometimes there will be that big slope and/or downhill where you really have to guide it in. In that case, trust your line and speed and hit it in.

I will judge my rounds much more by the quality of my best shots than the acceptability of my worse ones.


Posted
resquare your clubface until it looks right.

This won't help much if your eyes are way inside or outside the ball at set up, as then what looks right will actually be to the right (or left) of the hole.

So you're advising against doing this?

Driver: Nike Ignite 10.5 w/ Fujikura Motore F1
2H: King Cobra
4H: Nickent 4DX
5H: Adams A3
6I 7I 8I 9I PW: Mizuno mp-57Wedges: Mizuno MP T-10 50, 54, 58 Ball: random


Posted
I will use my tap in stroke, which is usually one leg forward with most of the weight on it, usualy my right leg and just wack it in the hole, from 4 feet or in. I honestly like using that type of stroke for short shots. My dad hates it because he always taught me to take my time, i just bomb these 5 footers all round with a tap in style stroke.

Matt Dougherty, P.E.
 fasdfa dfdsaf 

What's in My Bag
Driver; :pxg: 0311 Gen 5,  3-Wood: 
:titleist: 917h3 ,  Hybrid:  :titleist: 915 2-Hybrid,  Irons: Sub 70 TAIII Fordged
Wedges: :edel: (52, 56, 60),  Putter: :edel:,  Ball: :snell: MTB,  Shoe: :true_linkswear:,  Rangfinder: :leupold:
Bag: :ping:

Awards, Achievements, and Accolades

Posted
So you're advising against doing this?

Nope. Just suggesting it's worth checking out your setup sometime so you know what you're square to.

Stretch.

"In the process of trial and error, our failed attempts are meant to destroy arrogance and provoke humility." -- Master Jin Kwon

Awards, Achievements, and Accolades

Note: This thread is 5506 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 470 - 2026-01-13 Got some work in while some players were using the sim, so I had to stick around. 🙂 Good thing too, since… I hadn't yet practiced today until about 6:45 tonight. 😛 
    • That's not quite the same thing as what some people messaged me today.
    • Day 152 1-12 More reps bowing wrists in downswing. Still pausing at the top. Making sure to get to lead side and getting the ball to go left. Slow progress is better than no progress.  
    • Yea, if I were to make a post arguing against the heat map concept, citing some recent robot testing would be my first point. The heat map concept is what I find interesting, more on that below. The robot testing I have looked at, including the one you linked, do discreet point testing then provide that discrete data in various forms. Which as you said is old as the hills, if you know of any other heat map concept type testing, I would be interested in links to that though! No, and I did say in my first post "if this heat map data is valid and reliable" meaning I have my reservations as well. Heck beyond reservations. I have some fairly strong suspicions there are flaws. But all I have are hunches and guesses, if anyone has data to share, I would be interested to see it.  My background is I quit golfing about 9 years ago and have been toying with the idea of returning. So far that has been limited to a dozen range sessions in late Summer through Fall when the range closed. Then primarily hitting foam balls indoors using a swing speed monitor as feedback. Between the range closing and the snow flying I did buy an R10 and hit a few balls into a backyard net. The heat map concept is a graphical representation of efficiency (smash factor) loss mapped onto the face of the club. As I understand it to make the representation agnostic to swing speed or other golfer specific swing characteristics. It is more a graphical tool not a data tool. The areas are labeled numerically in discrete 1% increments while the raw data is changing at ~0.0017%/mm and these changes are represented as subtle changes in color across those discrete areas. The only data we care about in terms of the heat map is the 1.3 to 1.24 SF loss and where was the strike location on the face - 16mm heal and 5mm low. From the video the SF loss is 4.6% looking up 16mm heal and 5mm low on the heat map it is on the edge of where the map changes from 3% loss to 4%. For that data point in the video, 16mm heal, 5mm low, 71.3 mph swing speed (reference was 71.4 mph), the distance loss was 7.2% or 9 yards, 125 reference distance down to 116. However, distance loss is not part of a heat map discussion. Distance loss will be specific to the golfers swing characteristics not the club. What I was trying to convey was that I do not have enough information to determine good or bad. Are the two systems referencing strike location the same? How accurate are the two systems in measuring even if they are referencing from the same location? What variation might have been introduced by the club delivery on the shot I picked vs the reference set of shots? However, based on the data I do have and making some assumptions and guesses the results seem ok, within reason, a good place to start from and possibly refine. I do not see what is wrong with 70mph 7 iron, although that is one of my other areas of questioning. The title of the video has slow swing speed in all caps, and it seems like the videos I watch define 7i slow, medium, and fast as 70, 80, and 90. The whole question of mid iron swing speed and the implications for a players game and equipment choices is of interest to me as (according to my swing speed meter) over my ~decade break I lost 30mph swing speed on mine.
    • Maxfli, Maltby, Golfworks, all under the Dicks/Golf Galaxy umbrella... it's all a bit confounding. Looking at the pictures, they all look very, very similar in their design. I suspect they're the same club, manufactured in the same factory in China, just with different badging.  The whacky pricing structure has soured me, so I'll just cool my heels a bit. The new Mizuno's will be available to test very soon. I'm in no rush.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.