Jump to content
Note: This thread is 4485 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I don't fix other ppl's anymore... I'm not their servant.

In my book, that makes you a douchebag of the highest order. You are part of the problem and are almost as much to blame as the asshat who made the mark in the first place and didn't fix it. I fix as many pitch marks as i see, whether or not i hit the green.

Colin P.

Awards, Achievements, and Accolades

I fix every one that is still fixable. Actually had the house pro thank me for it.

Dave :-)

Awards, Achievements, and Accolades

Originally Posted by Fourputt

So you prefer to just let the course go to hell then?  Your attitude is almost as bad as that of the players who won't repair their own.  Or maybe you have an infirmity that prevents you from bending over more than once per green?

+1

I always fix my own ballmark. If I'm doing well on pace, I will generally fix any others I find. If someone is close behind, I'll usually only fix one or two per green (i.e., just my own, or my own and one other one). If I didn't leave a mark, I still look around for any that are in need of attention.

There's no need to fix every mark on the green, but if most golfers fixed their own plus one other, we'd almost never have problems with ballmarks, even if not everyone bothered. Even if you're conscientious, sometimes it's harder than it should be to find a mark. So just a little bit of "generosity" would cover for the inadvertent missed ones and give us a little defense against hooligans who don't even make an effort.

In the bag:
FT-iQ 10° driver, FT 21° neutral 3H
T-Zoid Forged 15° 3W, MX-23 4-PW
Harmonized 52° GW, Tom Watson 56° SW, X-Forged Vintage 60° LW
White Hot XG #1 Putter, 33"


Because its come to a point that it doesn't make a difference and I'm just not going to clean up after other ppl ever again. If you like cleaning after other ppls mess, nothing wrong with that. I'm just not going to any more. And won't play that course anymore at this rate. @Zeg, ok, if it's 1 close to mine, yea, I'll do it, but I won't go out of my way anymore for redoing a bunch. Fix 1 or 3 and in a week, there's 20 more feels like. It's useless on this course.

In my book, that makes you a douchebag of the highest order. You are part of the problem and are almost as much to blame as the asshat who made the mark in the first place and didn't fix it. I fix as many pitch marks as i see, whether or not i hit the green.

In my book, you are the reason these morons don't take responsibility because you keep cleaning up After their own mess. I pay to play and clean up after my own stuff, not to work for someone else. And you haven't seen me be a douchebag in the highest order, I can show it to you given the chance in real life.


Originally Posted by Sai-Jin

Because its come to a point that it doesn't make a difference and I'm just not going to clean up after other ppl ever again.

If you like cleaning after other ppls mess, nothing wrong with that.

I'm just not going to any more. And won't play that course anymore at this rate.

@Zeg, ok, if it's 1 close to mine, yea, I'll do it, but I won't go out of my way anymore for redoing a bunch. Fix 1 or 3 and in a week, there's 20 more feels like. It's useless on this course.

I disagree with you as others have.  I've said here before I'm not as obsessive as some guys here, pacing the green during all reasonable opportunities scanning for ball marks to fix and fixing 5+ on every green, but it seems lame not to fix ones you do notice even if they're not right next to yours.

But even given you've allowed frustration with ever reappearing dead spots to dissuade you from fixing any ball marks other than your own, you could at least try fixing your buddy's ball marks.  If he just accepts that and thinks, "Nice, my buddy'll do my work for me", then he's even lamer than he sounds and maybe you should look for new golf buddies but at least you're not responsible for bringing someone to the course who's leaving it in worse shape.

But it seems like for most guys at least hearing you explain to others that you're rushing in to fix his mark before he gets there because he refuses to learn to do it right and leaves a big 3 week dead spot behind every time he hits the green might shame him into bothering to start doing it right.

Matt

Mid-Weight Heavy Putter
Cleveland Tour Action 60˚
Cleveland CG15 54˚
Nike Vapor Pro Combo, 4i-GW
Titleist 585h 19˚
Tour Edge Exotics XCG 15˚ 3 Wood
Taylormade R7 Quad 9.5˚

Awards, Achievements, and Accolades

I feel fortunate it's not a big problem at our course. Rare to see more than 4-5 fresh marks on any green. Though I suspect it has more to do with lack of skill than anything. Only the par 3's are real bad and most of it is improperly repaired marks. One of the par 5's is kind of marked up. Most guys are hitting a 9i or wedge to get there in 3. Honestly a bigger problem is people not replacing/sanding divots.

Dave :-)

Awards, Achievements, and Accolades

I disagree with you as others have.  I've said here before I'm not as obsessive as some guys here, pacing the green during all reasonable opportunities scanning for ball marks to fix and fixing 5+ on every green, but it seems lame not to fix ones you do notice even if they're not right next to yours. But even given you've allowed frustration with ever reappearing dead spots to dissuade you from fixing any ball marks other than your own, you could at least try fixing your buddy's ball marks.  If he just accepts that and thinks, "Nice, my buddy'll do my work for me", then he's even lamer than he sounds and maybe you should look for new golf buddies but at least you're not responsible for bringing someone to the course who's leaving it in worse shape.   But it seems like for most guys at least hearing you explain to others that you're rushing in to fix his mark before he gets there because he refuses to learn to do it right and leaves a big 3 week dead spot behind every time he hits the green might shame him into bothering to start doing it right.

I hear you on this one and I understand. I'll try to balance it out and not get frustrated too much. Actually I never rush in before my friend to fix his, I just calmly tell him that he has been killing them green. Problem is if I fix his marks, he'd laugh and think I'm a know it all busy body. He also thinks he is a better golfer than me and knows more, which is true... He is a better golfer than me and he is 20 years older. So about his share, it's like damned if I do, damned if I don't. And about other ppl's mess, it's come to the point that I feel like as if I'm cleaning after my children's intentional mess and not letting them learn and take responsibility. But yes, I'll try to calm down and balance it out.


Originally Posted by Sai-Jin

And about other ppl's mess, it's come to the point that I feel like as if I'm cleaning after my children's intentional mess and not letting them learn and take responsibility.

You're thinking about it the wrong way.

When I clean up a ball mark, I'm not doing a favor for the jerk in the group ahead of me who left it.

When I clean up a ball mark, I'm doing a favor for the nice guy in the group behind me. Or maybe for the guy tomorrow, who won't have to try to do an impossible repair on a dried out ballmark.

Fixing the mark does some good. Who do you think you're teaching a lesson by spitefully refusing to invest 10 seconds of your time for the betterment of the course? The guy who left it doesn't care, but the guy who doesn't have to chip through it might be very grateful.

I disagree with the comment above about being a douche, but your attitude here is unjustifiably selfish. It's not so different from the attitude of the guys who don't clean up their own ball marks---after all, nobody else does, so why should they even bother cleaning up after themselves ?

In the bag:
FT-iQ 10° driver, FT 21° neutral 3H
T-Zoid Forged 15° 3W, MX-23 4-PW
Harmonized 52° GW, Tom Watson 56° SW, X-Forged Vintage 60° LW
White Hot XG #1 Putter, 33"


I've played with so many people that "fix" divots the wrong way. I try to bring it up.. but they're usually too busy acting like elitists with all their matching apparel for me to get a word in.

But I then feel like an elitist when I'm walking around the green fixing the divots.. then have people waiting in the fairway or just around thinking.. who does this guy think he is.

What's In My  Stand Bag

 

Driver:  FT-iZ 9*

Hybrids: C3 3,4,5

Irons: C3 6-GW

Wedges: C3 58*/8 and 54*/12

Putter:  blade

Ball: Gamer V2

 

http://cdn.thesandtrap.com/0/0d/150x50px-LL-0d81d772_tst_award_kickstarter_otm.png


Originally Posted by colin007

Quote:

Originally Posted by Sai-Jin

I don't fix other ppl's anymore... I'm not their servant.

In my book, that makes you a douchebag of the highest order. You are part of the problem and are almost as much to blame as the asshat who made the mark in the first place and didn't fix it. I fix as many pitch marks as i see, whether or not i hit the green.

If my group is following yours and you feel the need to do that on every green, I hope you do it really really fast, Actually that sounds like a course I wouldn't care to play.

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Originally Posted by colin007

In my book, that makes you a douchebag of the highest order. You are part of the problem and are almost as much to blame as the asshat who made the mark in the first place and didn't fix it. I fix as many pitch marks as i see, whether or not i hit the green.

Originally Posted by sean_miller

If my group is following yours and you feel the need to do that on every green, I hope you do it really really fast, Actually that sounds like a course I wouldn't care to play.

I do this too, but not in a way that delays play.  I do it while my companions are lining up putts, etc.  I try to repair at least 2 additional pitch marks if I can spot them easily.  I don't take an excessive amount of time or delay play to do so, and I very much doubt that Colin does either.   In my experience, players who care about the course are also concerned with pace of play and other issues of etiquette.

Rick

"He who has the fastest cart will never have a bad lie."

Awards, Achievements, and Accolades

Originally Posted by Fourputt

Quote:

Originally Posted by colin007

In my book, that makes you a douchebag of the highest order. You are part of the problem and are almost as much to blame as the asshat who made the mark in the first place and didn't fix it. I fix as many pitch marks as i see, whether or not i hit the green.

Quote:

Originally Posted by sean_miller

If my group is following yours and you feel the need to do that on every green, I hope you do it really really fast, Actually that sounds like a course I wouldn't care to play.

I do this too, but not in a way that delays play.  I do it while my companions are lining up putts, etc.  I try to repair at least 2 additional pitch marks if I can spot them easily.  I don't take an excessive amount of time or delay play to do so, and I very much doubt that Colin does either.

I doubt it too, but if he had too because the greens were especially pock marked, neither of us would probably want to play there twice anyway.

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Funny how people make assumptions. When I'm out as a single, which is most of the time, I'm always the one waiting. Even if I tee off and it looks wide open I'll catch up to someone eventually if there's someone to catch. If I don't take time to mess around, including fixing greens and lining up putts like my life depends on it, I'll run over the top of people. I can get though 9 holes in 40-45 minutes if I am riding and the course is clear. If it's not by the 4th or 5th hole I'm catching groups that have been out there for a while. My experience is people don't like to be pushed by singles. You can only play through so many times before there's no place to go.

Dave :-)

Awards, Achievements, and Accolades

Originally Posted by Fourputt

Quote:

Originally Posted by colin007

In my book, that makes you a douchebag of the highest order. You are part of the problem and are almost as much to blame as the asshat who made the mark in the first place and didn't fix it. I fix as many pitch marks as i see, whether or not i hit the green.

Quote:

Originally Posted by sean_miller

If my group is following yours and you feel the need to do that on every green, I hope you do it really really fast, Actually that sounds like a course I wouldn't care to play.

I do this too, but not in a way that delays play.  I do it while my companions are lining up putts, etc.  I try to repair at least 2 additional pitch marks if I can spot them easily.  I don't take an excessive amount of time or delay play to do so, and I very much doubt that Colin does either.   In my experience, players who care about the course are also concerned with pace of play and other issues of etiquette.

BTW, I'm not sure why you had to multiquote my post when I'd quoted him and included his entire post - nothing taken out of context, but you left out the part I highlighted, which had the effect of taking my post out of context. Just a pet peeve of mine, and certainly not on topic. Carry on.

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Originally Posted by sean_miller

BTW, I'm not sure why you had to multiquote my post when I'd quoted him and included his entire post - nothing taken out of context, but you left out the part I highlighted, which had the effect of taking my post out of context. Just a pet peeve of mine, and certainly not on topic. Carry on.

Because when I just use the single quote it doesn't bring in the nested quotes.  Just like this one.

Edit:  I just discovered and unchecked the "remove nested quotes" option.  Never even knew that it existed.  This is the only forum I've ever used with that as a default and I didn't even know it was an option. Erik has done at least 2 or 3 facelifts since I joined, and at one point the nested quotes went away and I never even looked to see if it was a user option.  I like having the option of removing the quotes I want to and just leaving what is pertinent to my reply.  Thanks for making me look it up.

Rick

"He who has the fastest cart will never have a bad lie."

Awards, Achievements, and Accolades

Will try to stay out of the fray...

I play a lot of public courses and many times play with strangers. I truly believe people just don't know any better.  It's not laziness or apathy, it's ignorance. I always fix 2-3 on every green and hope that my behavior rubs off. I keep 8-10 cheapie plastic jobs in my bag all the time and have been asked on many occasions to borrow mine - I just give them one of the spares. $10 for 100 on ebay.


On my course, when the pins are on the back of the green is when we see the most unrepaired ball marks.

[put hard hat on/]  Typically left by less skilled players who skip the ball in and only ever land on the front of the green and can't be bothered to walk 50' to see if they even made a ball mark.

I just fix the ones I can, when I can.

Overall our course has been making a push for everyone to have a little more ownership in taking care of it...ballmarks, divots, bunkers etc.....and it's better.  There are still people though who can't be bothered to fix a ball mark, put sand in a divot or rake a bunker smooth enough.


Note: This thread is 4485 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Fair points - one thing I would note, speaking as a consumer, the base model here is already very expensive. There is a (fairly large) part of me that is much more willing to pay additional customization costs if it's going to work better when the underlying product is expensive. If I'm getting a $10 putter out of a bargain bin, I'm comfortable giving it a try and if it doesn't work, then whatever - no big deal. Spend $450 plus tax and it better be good. I'd rather have something for 560 that's spot on rather than something that's 450 and not what I need. I'd also go the extra mile and pick out some of the visual customization as well - different color, different alignment lines etc. I don't necessarily see that $110 as poor value when it's already a high end and expensive piece of equipment. I don't know whether that's me being what the market will bear or that it costs them that much more to make it, but I don't particularly care either way. At the end of the day it really is just about what the market (i.e. me) will bear.  I will also note that I don't have a LAB putter and while I am periodically tempted, I'm not going to get one until I can be sure I'm getting the one that's right for me. Short of going to Oregon, I'm not sure how that can happen either, so I will remain a spectator who occasionally pops to PGA Superstore to have a play around with one.
    • One thing I've wondered about with set to the side camera models in addition to toe shanks; Is does the plexiglass covering the cameras get all dirty? Especially when hitting from grass. I've used skytrak with a mat before and it ends up getting what I'll call "mat dust" on it. But that easily wipes right off. I've never used one of these in the grass. But I would think they'd get "grass splatter" on them. ... maybe? is that an issue? 
    • I see what you are saying. I work with companies that make everything from hearing aids, to assembly cells, to fire trucks, to combines. Pretty much everything in between. I know of very few who cannot handle one-piece flow. (I'm actually struggling to think of any other than Rolls Royce. Incidentally, Rolls Royce is without a doubt the worst manufacturer I've ever worked with.) Either LAB's factory is really behind the times. (Pre-1992) or they are sticking you for ordering a custom.  Again, if they are making their customs from special order parts that's one thing. But since they are just building from standard parts, then either their factory sucks, in which case I could help them. Or they are just charging what the market will bear. And in that case, shame on us, the consumer, for allowing it.  A couple of good reads on the subject are "The Toyota Production System" (originally published in 1992, updated several times.) And the even better "The Toyota Way" (originally published in 2003). Any manufacturer of any product should be able to achieve one-piece flow.       Don't get me wrong. Even though I personally didn't really like their putter, I'm rooting for them. I've been involved with American Manufacturing since the late-80's. I got to see first hand as Toyota Principles migrated to the US. Pretty much every major American Manufacturer has adopted these principles in some form or another.... or they've gone out of business.  LAB is an American Manufacturer and therefore I'm on their side. Which is why if they really do need an extra 110 to 150 bucks to produce a custom from standard parts, I (and others like me) can help them.  I decided to write them an email and simply ask them if the additional cost was due to market value or cost-plus pricing. I'll let you know if they respond.   
    • Day 229 (18 Dec 24) - Wonderful Wedge Wednesday - pulled out the 58* to hit some easy 58* wedges in the backyard-key focus again was on the foot position (getting that slightly open foot stance, opened hips and making a smooth swing thru the ball.  
    • Some quick notes. Mine arrived yesterday, and on Monday I used a student's in his lesson with him. The touch interface is very responsive. Almost iPad-like. Not at all like crappy touch screens that lag or where you're not sure you hit the button. A lot of the smaller (negative) issues are software based, so I think they can iterate on them and improve them: I named myself "Erik J. Barzeski" and so my little user "circle" shows up as "EJ." First, stop assuming someone's initials. Second, when I choose "Edit Users" the only option to edit is… to remove the user. I can't edit my name or whether I'm a righty or a lefty. That's not "editing" a user. I created "Student Lefty" and "Student Righty" as guest profiles, and think they should add colors to the little circles. It could let you more quickly find the person you're looking for. Not much of an issue with three, but if you play with a group of ten friends here and there, it would help. There are four different ways to dismiss a screen, which I found funny. You can tap away from a panel, click an "X," click "save/cancel," or click "Done." They could have done Not all clickable areas appear to be tappable. "Power Save" and "Battery Save" are tappable (you can change the settings), but they just say "Power Save : ON" or something. I definitely don't love the shot tracer. In the overhead view, a dot appears where your ball would have landed. But… if you're hitting the same club, every dot is the same color (orange for a 7I). I think the last dot, the last shot, should be a different color. After you've hit five or ten shots, you don't even really know which dot is the new one. The impact camera is more than what's offered by a lot of things (like even the QuadMAX), but at the same time, not all that useful. It's only about six (eight? ten?) frames and it's snot from a not great angle because you hit from so side-on. The hitting area with club data is pretty small. This won't work very well off of grass. And you'll want to move it around lest you wear out your Alignment is super easy. Lay a club down, rest two balls against it… aligned. I do wish it prompted you to align it when you turn it on, even if one of the options was "keep current alignment" if you haven't moved it since last using it (or it never moves in your sim or something). I don't have a subscription yet and may never get one. I don't plan to use Home Tee Hero for much. I may plug it in to GSPro at some point. I think you can connect to it via your WiFi network. As in… it joins your network, and so you can be online and connected to it wirelessly. I'm not sure what the USB-C port is for. The fiducials (club stickers) I have for the GCQuadMAX also work on the Garmin. You don't need to use their larger stickers. Heck, I used the tab from a GC fiducial on Monday and it worked fine. The storage/travel case is well done. It's solid, sturdy. But, oddly, there's no real good place to put the charger and cable. Maybe I can set it in against the back side beneath the handle? I could have used a little pocket for that. The weight is not anywhere near as substantial as it looks. Because the GCQuadMAX is denser, I think it may almost be just as heavy (I think officially it's 7.x pounds for the Quad and 9.x for the R50). Because the unit sits almost directly beside the golf ball, I don't think people are going to be as worried about shanks as they are with the GC units (GC3, GC4/MAX) or other "side-on" units. I do wonder about someone accidentally hitting it off the toe and into what seems to be plexiglass covering the cameras, though. The range UI is nice — you can split screen to show the impact video, the shot data, the range overview of ball flight… etc. If you hook it up to an external display I'm pretty sure you can get three things. Maybe four, with split screens on both? That's all I can think of for now, but I'll be updating this as I go.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...