Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4368 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I've got a set of Ping G5 irons. It looks dirty but still in a very good shape. I was wondering if there is any particular way to clean clubs correctly. How to clean them good without damaging or having them rust? Is it possible to make them look like new? Any specific do's and don't's?

Thanks!

TaylorMade RBZ 9° | TaylorMade Burner SF 2.0 16.5° | Mizuno MP-33 3-PW | Titleist Vokey SM4 56°11 | Cleveland Classic #4


Posted

I usually use warm water, some dish soap, a tooth brush and a soft cloth to dry them with.

If there is a better or more preferred way, would love to hear it.

Roy


Posted

I usually use warm water, some dish soap, a tooth brush and a soft cloth to dry them with.

If there is a better or more preferred way, would love to hear it.

That's exactly what I do as well. Warm water with a little bit of dish soap, where the water is just high enough to cover the golf heads. I also have another small bucket with a bit of cool water to dip the heads in to rinse them. I let the clubs sit in the warm soapy water for a few minutes, then I use the toothbrush to scrub out all the dirt. A quick dip in the cool water, then toweled dry.

Russ B.

Awards, Achievements, and Accolades

Posted
If you're talking about the finish, try "Bar Keepers Friend" & a toothbrush.

:tmade: R15 14* Matrix Black Tie 7m3

:adams: Speedline Super S 3w & 5w Matrix Radix HD S VI

:callaway: X-12 4-PW Memphis 10

IONNOVEX  Type S GDT 50*, 54* & 62* Mitsubishi Rayon Kuro Kage Black 80ir

:odyssey: Tri-Ball SRT

-Landon


Posted
A small brush with brass bristles will do a good job of getting ground in grunge out (NOT steel bristles!). Barkeeper's Friend is good but I wouldn't be concerned using Comet or whatever you may have under the sink, golf clubs are pretty tough by design.

Driver: Titleist 913 D2 10.5*, Aldila RIP Phenom 50

Fairway 1: Titleist 913F, 17*, Titleist Bassara W55

Fairway 2: Titleist 913F, 21*, Titleist Bassara W55

Irons: Titleist AP1 714 5-PW, Aerotech Steelfiber i95

Wedges: SCOR 4161 48/52/56/60, Genius 9

Grips: GolfPride New Decade Red Mid-size on all of the above.

Putter: Scotty Cameron Newport 2 - Super Stroke Slim 3.0


Posted
... Is it possible to make them look like new? Any specific do's and don't's?

Thanks!

Yes, it is, but it will cost you. See http://www.golfworks.com/

GolfWorks refurbishes clubheads. It starts out at $6 a club to remove the head, plus either $22 or $60 a clubhead for refinishing, depending on whether the club needs to be rechromed. (I'm not sure if the G5 irons are considered chromed).

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted
Warm water and a cloth work great. Preventive care works best. Wipe them down after each round, put a club brush on your bag and clean dirt out after each shot. It will become habit forming and clubs will always be clean where you need it most.

Posted

I would second the advice of a brush, a bucket of warm soapy water, and a towel.

However the best method for cleaning your clubs is to do it immediately when the dirt is easiest to get off. Carry a towel with your bag, draped over the top of your clubs, and wet down the half of it on the other side of your golf bag. This way you have a wet and dry towel on hand all the time. Before and after each shot just give the clubhead and grip a quick once-over with the wet side of the towel before drying them and hitting your shot. With a little practice it becomes unconscious as you pull your club as a part of your pre-shot routine.

Awards, Achievements, and Accolades

Posted
I normally clean my clubs during the round with a wet towel and club brush very simple and takes a 2nd. They get a normal cleaning with warm water and club brush then dried after the round before I pith them away till next weekend. I clean the grips quickly with warm water and dry.

  :sunmountain: eco lite stand Bag
:tmade: Sim 2 Max driver
 :callaway: Mavrick 20 * hybrid
:tmade: M2 3HL                               :mizuno: JPX 923 5-gw                           

 Lazrus 52, 56 wedges

:scotty_cameron:
:true_linkswear:-Lux Hybrid, Lux Sport, Original 1.2

:clicgear:


Posted

Thanks for the knowledgeable replies, guys.

I'll try with warm soapy water, old toothbrush and cloth first.

If it still looks dirty, then I'm going with Bar Keepers Friend.

TaylorMade RBZ 9° | TaylorMade Burner SF 2.0 16.5° | Mizuno MP-33 3-PW | Titleist Vokey SM4 56°11 | Cleveland Classic #4


Posted

If you're talking about the finish, try "Bar Keepers Friend" & a toothbrush.

Is it "safe" for forged irons and driver/woods as well?

TaylorMade RBZ 9° | TaylorMade Burner SF 2.0 16.5° | Mizuno MP-33 3-PW | Titleist Vokey SM4 56°11 | Cleveland Classic #4


Posted
Is it "safe" for forged irons and driver/woods as well?

I've never used it on forged clubs, but I would imagine it'd be OK. It comes in both power and liquid form.

:tmade: R15 14* Matrix Black Tie 7m3

:adams: Speedline Super S 3w & 5w Matrix Radix HD S VI

:callaway: X-12 4-PW Memphis 10

IONNOVEX  Type S GDT 50*, 54* & 62* Mitsubishi Rayon Kuro Kage Black 80ir

:odyssey: Tri-Ball SRT

-Landon


  • Moderator
Posted

As a few others have said, use a wet towel and/or use a brush after each round or even after each shot.  Would recommend a nylon brush, can find it at any golf store.  I usually clean my grips at home, which is just wiping them down with a wet towel and letting them air dry.

Mike McLoughlin

Check out my friends on Evolvr!
Follow The Sand Trap on Twitter!  and on Facebook
Golf Terminology -  Analyzr  -  My FacebookTwitter and Instagram 

Awards, Achievements, and Accolades

Posted

A small brush with brass bristles will do a good job of getting ground in grunge out (NOT steel bristles!). Barkeeper's Friend is good but I wouldn't be concerned using Comet or whatever you may have under the sink, golf clubs are pretty tough by design.


I wouldn't use Comet, Ajax, or any other abrasive cleaner on chromed irons or highly polished finishes, unless you want the bright shiny finish to wind up as a satin finish. Also not good for painted surfaces. Bar Keepers Friend or Bon-Ami have a very low abrasive content so they should be ok.

I'd also stick with nylon bristles instead of brass, even for the hard gunk. Just let the head soak in warm water with dish soap (I use Dawn) for a longer period to loosen up the crud.

Ball marks on the top of woods (I know, none of us make these, but they might be on a club we bought second hand) can be buffed out with automotive polishing compound, a damp cloth, and a LIGHT touch. It also works well for polishing up a set of chromed irons.

Bob E.

Dallas, TX


Posted

never have needed any kind of soap.  nylon brush and water.  warm water is luxury, but even better

ball marks????  rubs off with the thumb, maybe a little spit

Bill - 

Awards, Achievements, and Accolades

Posted

I use a toothbrush or a nylon brush with some warm water. Usually takes off most of the dirt. If not then a little bit of liquid soap.

As for the grips, Comet and a toothbrush. Gets into the little nooks of the grip and really gets them good as new. Most of the time grips feel warn down, but they are just dirty.

As for Bar Keepers Friend, it is an abrasive. I think it would be fin on golf clubs. But I doubt you will come accross anything that requires that stuff. Usually liquid dish soap can take off anything that gets on your club. Bar Keepers Friend is really good at taking off baked on food on stainless steal. Doubt you will ever have that on your clubs.

Matt Dougherty, P.E.
 fasdfa dfdsaf 

What's in My Bag
Driver; :pxg: 0311 Gen 5,  3-Wood: 
:titleist: 917h3 ,  Hybrid:  :titleist: 915 2-Hybrid,  Irons: Sub 70 TAIII Fordged
Wedges: :edel: (52, 56, 60),  Putter: :edel:,  Ball: :snell: MTB,  Shoe: :true_linkswear:,  Rangfinder: :leupold:
Bag: :ping:

Awards, Achievements, and Accolades

Posted
I use three items. 1.A soft bristled tooth brush (the one I didn't throw away when I replaced it) 2. A spray bottle of Windex (the blue stuff) 3. A microfiber towel. Spray the face of the club, brush the grooves, wipe with the microfiber. Then spray a shot on the shaft above the head, wrap the microfiber around it, slide the microfiber the length of the shaft and back down then put it in the bag. It simply doesn't get any easier or better than this.

Posted

I use a soft nylon brush that my wife got from Pamper Chef to clean potatoes for baking, A bucket of warm soapy water and a bucket or warm clean water,  Soak my clubs for a minute in the warm soapy water, brush them down, rinse them in the clean water, dry them off with a towel and then let them sit on the kitchen table for a couple of hours to make sure they are dry before I put them back in the bag.

For my grips, I put some soap on the brush and give the grips a good scrubbing and then run under clean water and wipe dry with a towel.  I do heads and grips at the same time so I let them sit to be sure they are completely dry before putting them back in the bag.

Craig 

Yeah, wanna make 14 dollars the hard way?


Note: This thread is 4368 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Never practiced golf when I was young and the only lesson ever taken was a driver lesson. I feel like I'm improving every year. However, the numbers don't support my feeling about improving. I usually drop to 12-13 during the summer while playing the familiar courses around home and then go on golf trips in the fall to new courses and increase to end the year between 15-17. Been a similar story for a number of years now but hey, it's the best thing there is in life so not too bothered but reaching 9.9 is the objective every year. Maybe a few lessons and practice could help me achieve it since I pretty much have no idea what I'm doing, just playing and never practice.
    • I am semi-loyal. Usually buy four dozen of one ball and only play that until out and then determine whether to continue or try another one. Since starting my semi-loyal path to success, I've been playing the below, not in order: ProV1 ProV1x ProV1x left dash AVX Bridgestone BXS Srixon Z-star XV I am not sure if it has helped anything, but it gives a bit of confidence knowing that it at least is not the ball (while using the same one) that gives different results so one thing less to mind about I guess. On the level that I am, not sure whether it makes much difference but will continue since I have to play something so might as well go with the same ball for a number of rounds. Edit: favorite is probably the BXS followed by ProV1/Srixon Z-star XV. Haven't got any numbers to back it up but just by feel.  
    • Will not do it by myself, going to the pro shop I usually use after Cristmas for input and actually doing the changes, if any, but wanted to get some thoughts on whether this was worthwhile out of curiosity. 
    • In terms of ball striking, not really. Ball striking being how good you are at hitting the center of the clubface with the swing path you want and the loft you want to present at impact.  In terms of getting better launch conditions for the current swing you have, it is debatable.  It depends on how you swing and what your current launch conditions are at. These are fine tuning mechanisms not significant changes. They might not even be the correct fine tuning you need. I would go spend the $100 to $150 dollars in getting a club fitting over potentially wasting money on changes that ChatGPT gave you.  New grips are important. Yes, it can affect swing weight, but it is personal preference. Swing weight is just one component.  Overall weight effects the feel. The type of golf shaft effects the feel of the club in the swing. Swing weight effects the feel. You can add so much extra weight to get the swing weight correct and it will feel completely different because the total weight went up. Imagine swinging a 5lb stick versus a 15lb stick. They could be balanced the same (swing weight), but one will take substantially more effort to move.  I would almost say swing weight is an old school way of fitting clubs. Now, with launch monitors, you could just fit the golfer. You could have two golfers with the same swing speed that want completely different swing weight. It is just personal preference. You can only tell that by swinging a golf club.     
    • Thanks for the comments. I fully understand that these changes won't make any big difference compared to getting a flawless swing but looking to give myself the best chance of success at where I am and hopefully lessons will improve the swing along the way. Can these changes make minor improvements to ball striking and misses then that's fine. From what I understood about changing the grips, which is to avoid them slipping in warm and humid conditions, is that it will affect the swing weight since midsize are heavier than regular and so therefore adding weight to the club head would be required to avoid a change of feel in the club compared to before? 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.