Jump to content
Note: This thread is 3337 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Hi - first time poster but have a major issue.   I'm not a good golfer but this summer shot best round ever at 89!  So naturally my inflated ego and I went to get custom fitted new irons to replace my 30 year-old Taylor Made Bubble shaft off the rack irons.   Yea - you heard that right  - bubble shafts.   I got callaway great big bertha irons 7, 8, 9, PW, and 5 and 6 hybrids.   I've never been able to hit hybrids well or even close to consistently - but my ego again let them talk me into it.   I played with these new "custom" clubs and it was god -awful - I mean really awful.    Think a made a multi-hundred dollar mistake!   What's happening in my shots - -  You name it.   Shanking, topping, hooking...and salt in the wound is when I do manage a good connection - ball goes about 15-20 yards shorter than my old clubs.     Probably one of those golfers who is not good enough for custom clubs - so what now?  Callaway says they only take returns "unused" - and all these custom settings and stuff probably are sunk costs.   I've played with them twice.   Advice?


It takes time to get used to a new club. I assume you hit them pretty well when getting fitted? Go back to the facility and ask for the same fitter to get your swing back?

:ping:  :tmade:  :callaway:   :gamegolf:  :titleist:

TM White Smoke Big Fontana; Pro-V1
TM Rac 60 TT WS, MD2 56
Ping i20 irons U-4, CFS300
Callaway XR16 9 degree Fujikura Speeder 565 S
Callaway XR16 3W 15 degree Fujikura Speeder 565 S, X2Hot Pro 20 degrees S

"I'm hitting the woods just great, but I'm having a terrible time getting out of them." ~Harry Toscano

Awards, Achievements, and Accolades

Agree with Lihu ... If they were "custom" then you must have hit them well while getting fitted, correct? Just give it a little time and don't talk yourself out of them so quickly - you should be fine. Unless you mean something different when you say "custom?"
Awards, Achievements, and Accolades

Hi - first time poster but have a major issue.   I'm not a good golfer but this summer shot best round ever at 89!  So naturally my inflated ego and I went to get custom fitted new irons to replace my 30 year-old Taylor Made Bubble shaft off the rack irons.   Yea - you heard that right  - bubble shafts.   I got callaway great big bertha irons 7, 8, 9, PW, and 5 and 6 hybrids.   I've never been able to hit hybrids well or even close to consistently - but my ego again let them talk me into it.   I played with these new "custom" clubs and it was god -awful - I mean really awful.    Think a made a multi-hundred dollar mistake!   What's happening in my shots - -  You name it.   Shanking, topping, hooking...and salt in the wound is when I do manage a good connection - ball goes about 15-20 yards shorter than my old clubs.     Probably one of those golfers who is not good enough for custom clubs - so what now?  Callaway says they only take returns "unused" - and all these custom settings and stuff probably are sunk costs.   I've played with them twice.   Advice?

Tell us more about the process you went through to get "custom fit".  Did you hit them well during the fitting?  If you've never hit hybrids, they take some time to get used to, remember to hit them like just like you would an iron.

You adapted your swing to your old clubs, depending on how much was changed in the new clubs (length, lie, shaft stiffness) you may have to adjust how you address the ball.  If you hit your old set well, you will be able to hit these as well if not better but you may have to make some adjustments.

Joe Paradiso

Awards, Achievements, and Accolades

Agree with what everyone else has stated. You will need time to adjust, give it time. If you were fitted properly, you should see the results.


Thanks Joe and others.  Yes - I did seem to hit them well during the fitting.  I went to a certified fitter at a local club - not a box store.  He had all his machines and gadgets and that lie board.   I'm female but tall - the clubs I had before were men's clubs standard length so he recommended stay with men's clubs cut down by 3/4" from standard length.  7 iron fitting specs were lie angle 63.5 or 1UP as they say, with senior flex.    They feel very SHORT and not sure what adjustments to make with shorter shaft and change in lie angle.  I know to hit hybrids like irons - had a 3 RBZ HB in the bag for a while with mixed results - much more consistent using standard RBZ 3 wood in fairways.   The RBZs are senior flex - so no change there.  Taylor Made irons were standard flex - R80 - too stiff for my swing specs...but I did pretty well with them!  They were just old.     .


You're welcome.  If he cut the clubs shorter than your old clubs that's probably the problem.  Try standing closer to the ball than you're used to.  You also want to pay attention to where you're making contact with the ball on the club face.  Give them some time, it sounds like you were fit properly so it's just a matter of you getting familiar with them.

Joe Paradiso

Awards, Achievements, and Accolades

You're welcome.  If he cut the clubs shorter than your old clubs that's probably the problem.  Try standing closer to the ball than you're used to.  You also want to pay attention to where you're making contact with the ball on the club face.  Give them some time, it sounds like you were fit properly so it's just a matter of you getting familiar with them.

Agree with this.  If it turned out that your old clubs were that much too long for you, then it's just a matter of getting used to properly fitted clubs.  Give it a little time and you'll probably start to fall in love with them and understand why we fit you the way he did. :)

Awards, Achievements, and Accolades

Strangely enough I have done the same thing. 50th birthday was this weekend so treated myself to fitted clubs. Was hoping for Mizuno 850's but hit Big Bertha's so much better than anything else so ended up with a set 2° flat. Went to the range on Saturday morning and totally struggled. No consistency at all, and struggled getting my weight forward. Just need to get used to them I hope! Quite a bit lighter than my old clubs with the Speedstep 80 shafts. Need more practise...


Callaway Big Bertha V Series 10.5 Driver stiff shaft
Benross Hot Speed 16 deg 3 fw
Callaway XR 22 deg hybrid
Callaway XR 25 deg hybrid
Callaway Big Bertha 6-pw
Callaway Mack Daddy 3 48/54/60 wedges
Odyssey White Hot Pro Havok


After I've got fitted, my HI went up for a few months.  See http://thesandtrap.com/t/78501/diary-of-a-bogey-golfer-with-his-1st-custom-fit-clubs for my experience.   It takes time to get adjusted for a new, fitted clubs for sure.

RiCK

(Play it again, Sam)

Awards, Achievements, and Accolades

After I've got fitted, my HI went up for a few months.  See http://thesandtrap.com/t/78501/diary-of-a-bogey-golfer-with-his-1st-custom-fit-clubs for my experience.   It takes time to get adjusted for a new, fitted clubs for sure.

I hope you are right for the OP and myself as well! Hit balls at the range again last night and still really struggling - lost the rhythm of my swing.


Callaway Big Bertha V Series 10.5 Driver stiff shaft
Benross Hot Speed 16 deg 3 fw
Callaway XR 22 deg hybrid
Callaway XR 25 deg hybrid
Callaway Big Bertha 6-pw
Callaway Mack Daddy 3 48/54/60 wedges
Odyssey White Hot Pro Havok


  • 3 weeks later...

Hi - first time poster but have a major issue.   I'm not a good golfer but this summer shot best round ever at 89!  So naturally my inflated ego and I went to get custom fitted new irons to replace my 30 year-old Taylor Made Bubble shaft off the rack irons.   Yea - you heard that right  - bubble shafts.   I got callaway great big bertha irons 7, 8, 9, PW, and 5 and 6 hybrids.   I've never been able to hit hybrids well or even close to consistently - but my ego again let them talk me into it.   I played with these new "custom" clubs and it was god -awful - I mean really awful.    Think a made a multi-hundred dollar mistake!   What's happening in my shots - -  You name it.   Shanking, topping, hooking...and salt in the wound is when I do manage a good connection - ball goes about 15-20 yards shorter than my old clubs.     Probably one of those golfers who is not good enough for custom clubs - so what now?  Callaway says they only take returns "unused" - and all these custom settings and stuff probably are sunk costs.   I've played with them twice.   Advice?

Are you making progress with the new irons? It's taken a while but I'm now seeing light at the end of the tunnel. Starting to get my distance back with a lovely high ball flight, and the bad strikes have drastically reduced. Good luck!

 


Callaway Big Bertha V Series 10.5 Driver stiff shaft
Benross Hot Speed 16 deg 3 fw
Callaway XR 22 deg hybrid
Callaway XR 25 deg hybrid
Callaway Big Bertha 6-pw
Callaway Mack Daddy 3 48/54/60 wedges
Odyssey White Hot Pro Havok


Note: This thread is 3337 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Wordle 1,255 6/6 ⬜⬜⬜⬜⬜ ⬜🟨⬜⬜🟨 ⬜🟨🟨🟨⬜ ⬜🟩🟩🟩🟩 🟩⬜⬜⬜⬜ 🟩🟩🟩🟩🟩
    • Lazarus Irons....top notch and way cheaper than the big brands.
    • I know you guys were discussing this like a year ago. But, ironically I just had this discussion with my brother-in-law. We literally just did one of these. I'd always used the "Slow-Cook, Rest, and Sear" Method. But my bother-in-law was convinced the "5-Min/lb, 500 degree" method was the way. So, we gave it a go. I have to say it came out great.  I have a 25 year old, electric oven, GE brand... Not sure if that matters, but it came out great. ... Of course we stressed that nobody was to open the oven.   I don't make these all that often so, I'm not sure if I can fully recommend one method or the other, because without doing a Pepsi Challenge, I'd say both ways come out great. 👍😁👍
    • Wordle 1,255 5/6 🟨⬜⬜⬜⬜ ⬜⬜🟩⬜⬜ ⬜🟩🟩⬜⬜ 🟩🟩🟩⬜⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,255 5/6 ⬜🟩⬜⬜⬜ ⬜🟩🟩⬜⬜ 🟨🟩🟩🟨⬜ ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...