Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4611 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I have gone back to playing older clubs and I was wondering who does the same. I'm talking about clubs 20 years and older.

Currently I switch between sets of 1967 and 1987 Wilson Staff irons. I also play with a 1955 Macgregor M2 putter.

Irons: Staff 1987 or 1967 Dyna-Power
Driver: R580
3W: Burner Bubble
5W: Quad Pro
Hybrid: Halo 3iPutter: 1955 M2


Posted
I played the same set of Wilson 1200 GE's dating back to about 1984 (They were originally my dad's) until about halfway through this season. They treated me well, but it was time for an upgrade.

Bag: Grom
Driver: HiBore 10.5° Fuji Stiff
3W: V-Steel 15° Graphite Designs YS-6 Stiff
3h-4h: Bobby Jones Stiff
5i-PW: CG4 Steel StiffWedges: 588 DSG RTG 52°, 900 RTG 56° Low bounce, Reg. 588 RTG 60°Putter: Dead CenterBalls: Pro V1 Speed Cart V1Home Courses: Riverdale Dunes / Knolls,...


Posted

My clubs are new but based on a old design.

2005 Apex



73 Apex



I also have about 15 sets of old Hogans, my oldest set being from '64. Although I can't say I play with them.

Callaway RazrFit Extreme 9.5 w/Project X 6.5
Callaway XHot Pro 15* 3Wood w/Project X 6.5
Callaway XTour 18* 2h w/S300
Callaway XHot Pro 4/5 irons w/S300
Callaway XForged III 5-PW irons w/S300
Callaway Forged 52*/58* Wedges
Odyssey 7 Versa 90
Callaway Hex Black Tour


Posted
I use my dad's old bubble shaft irons from about 15 years ago, in adition to the same putter as him (the Tuttle II, which I'm guessing was a very early mallet). When my dad bought these they were top of the line, they've been handed down to me, and whenever I (or whenever he did) break a wood or iron, he'd go online and buy a brand new club for 15 dollars.

Posted
I find it nearly impossible to tackle modern courses with old equipment.

Driver: Sumo2 5900 10.5*
3+ Utility: 3DX Utility 13.5*
Hybrids: 4DX 18.5*
Irons: MP-30 3-PW
Wedges: Vokey SM54.10 & SM60.04Putter: T.P. Mills StudioBall: GamerBag: Warbird Stand


Posted
I find it nearly impossible to tackle modern courses with old equipment.

My course is a 'modern' one at over 7000 yards. My older stuff works just fine.

Irons: Staff 1987 or 1967 Dyna-Power
Driver: R580
3W: Burner Bubble
5W: Quad Pro
Hybrid: Halo 3iPutter: 1955 M2


Posted
I have a set of old Tommy Armour blades that I drag out on occasion just for fun.

Titleist 907D1 10.5°
Titleist 906F4 15.5°
Titleist 906F4 18.5°
Wilson Staff Pi5 3-P
Titleist Vokey 56.14Cleveland CG12 60°Scotty Cameron Newport Two


Posted
While I initially was looking for new Irons this year ( as I seem to do every spring) I opted to keep the trusty Wilson Staff Blades I've had since the 80's. I'm investing $$ this off-season in lessons rather then clubs. Once I get the new swing down better, I'll concider some new technology.........
I've spent most of my life golfing - the rest I've just wasted.

In my bag todayâ¦.
Driver: 2009 S9-1 10.5
19d Hybrid4-SW:2008 FP 58/10 Mizuno MP T-10Putter: White Hot XG Sabertooth

Posted
Depends what you call old... I have some older Spalding TP Mills and a older Scotty Cameron c. '95 newport.

Driver: 10.5* SuperQuad TP 1st Edition All Black V2 Stiff
5 Wood - 585.h 19* DG S300
Irons: 3-PW S59 Stiff
Wedges: Rac TP 52*, 60* MP-T 56*
Putter(s): Anser 3 TP Black ballGET TO SINGLE DIGITS!Goal: Beat a certain admin that lives in my town


Posted

I'm still using the custom-built clubs I had made in 1984, including persimmon woods (made of real wood), and cavity-back irons. Exceptions are a graphite (head) driver circa 1991, and a new two-ball style putter.

I'll have to agree with Zakko that I have a lot of trouble on modern courses. What with all the new technology the courses are using like high-resistance air and always-a-headwind fairways, selective gravity, and the intelligent rough that strongly attracts balls struck with old equipment. Just a matter of time until the better courses treat equipment more than 5 years old like they do steel spikes.

Fortunately, my home course is a muni, built in 1930. So far they've used their budget for old-fashioned course maintenance like watering, mowing, and taking really good care of the grounds.

A little late this year, but next season I'll have to find a modern course to try, and see just how bad my stuff is.

  • Upvote 1

--------------------

-Bob

If it ain't broke, you're just not trying.-- Red Green


Posted
I play with a set of 1990 BeCu Eye2+'s and I am playing a lot better than I did with newer clubs.

23Rounder

Tour Burner 9.5 / RE*AX 60g Stiff
Launcher 13 & 17 Fairway / Fujikura Gold Stiff
MT Pro-C 3-W / DG S300 MP 52.07 Vokey SM58.12 Tracy II, 34" Putter Z-URS or NXT Tour


Posted
Got fitted on Friday for my modern sticks; pick them up tomorrow.

Wasn't going to play today because of the aforementioned reason, but a fellow board member talked me into playing today...so I went old school:

Driver: 975D 8.5*
Pittsburgh Persimmon 3-wood: 17* that Dad got me for my b-day c. 1981
1-iron: Tommy Armour w/S300
Irons (see avatar): Dynamic S 2-PW 1985 Wilson Staff Fluid Feel Forged blades (best clubs ever made)
Sand Wedge: TA 845
Putter: Acushnet Left Hand Flange #33A that my Dad bought me for my 8th(?) b-day?

My goal was to break 50 with that bag. Shot a 44. I had a blast!!!

Posted
I play my 1992 845s with no problems. I hit them well and have yet to find something that is that much better. I hit them as far, if not farther, then some of my friends who play "jacked up" lofts with their newer stuff. My best golfing buddy still plays 1970s vintage Wilson blades and plays to a 3. He may pull the trigger soon for a little more forgiveness. I have updated my woods as I have really seen the technology explode there.

Callaway AI Smoke TD Max 10.5* | Cobra Big Tour 15.5* | Rad Tour 18.5* | Titleist U500 4i | T100 5-P | Vokey 50/8* F, 54/10* S,  58/10* S | Scotty Cameron Squareback 1


Posted
Oh yeah, I forgot that I'm playing with a putter that is probably close to 20 years old. See my sig., it's a Titleist from before the Scotty Cameron days. I don't know exactly how old it is. When I was about 14 (1990) my buddy from down the street gave it to me - his dad was one of those guys with like 20 putters in the garage. It was at least a couple years old when I got it.

Bag: Grom
Driver: HiBore 10.5° Fuji Stiff
3W: V-Steel 15° Graphite Designs YS-6 Stiff
3h-4h: Bobby Jones Stiff
5i-PW: CG4 Steel StiffWedges: 588 DSG RTG 52°, 900 RTG 56° Low bounce, Reg. 588 RTG 60°Putter: Dead CenterBalls: Pro V1 Speed Cart V1Home Courses: Riverdale Dunes / Knolls,...


Posted
i was wondering this too. i have seen some people with a 3 wood that is really wood. i mean they look really nice but can you hit it as far as the steel ones?

Driver: Pinemeadows Bloc Driver 10
Hybrid: Adams A2 3 and 4 iron stiff
Irons: A2 hybrid irons
Wedges: Golf Smith 56 and 60 Degree
Putter: Pinemeadows bladeBall: Nike Power Distance softBag: Datrek Icon


Posted
^ I saw a guy with a persimmion head 3wood hammer it down the middle about 225 yards. I've never used one.

I use my dads old spalding pro impact irons sometimes. They're from 91' and they work great. Nice ball flight, easy to hit, not overly long but not short.

: 905R 9.5*
904f 15*
Baffler DWS 20*
eye 2
spin milled 54*, Vokey 58* White Hot XG #9 Pro V1x


Posted
i was wondering this too. i have seen some people with a 3 wood that is really wood. i mean they look really nice but can you hit it as far as the steel ones?

I just retired my persimmon (real wood) 3-wood. 1984 model and it finally split from age (whimper). Anyhow, I still have the persimmon 5-wood from that set. Lovely club, hits about 190. I use it from the tees, fairway, rough, uphill, downhill, sidehill, doesn't matter. It will hit a nice fade on demand, my "go to" club. Would a steel club go further? I dunno, but would I want to try? Distance isn't everything.

--------------------

-Bob

If it ain't broke, you're just not trying.-- Red Green


Note: This thread is 4611 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 152 1-12 More reps bowing wrists in downswing. Still pausing at the top. Making sure to get to lead side and getting the ball to go left. Slow progress is better than no progress.  
    • Yea, if I were to make a post arguing against the heat map concept, citing some recent robot testing would be my first point. The heat map concept is what I find interesting, more on that below. The robot testing I have looked at, including the one you linked, do discreet point testing then provide that discrete data in various forms. Which as you said is old as the hills, if you know of any other heat map concept type testing, I would be interested in links to that though! No, and I did say in my first post "if this heat map data is valid and reliable" meaning I have my reservations as well. Heck beyond reservations. I have some fairly strong suspicions there are flaws. But all I have are hunches and guesses, if anyone has data to share, I would be interested to see it.  My background is I quit golfing about 9 years ago and have been toying with the idea of returning. So far that has been limited to a dozen range sessions in late Summer through Fall when the range closed. Then primarily hitting foam balls indoors using a swing speed monitor as feedback. Between the range closing and the snow flying I did buy an R10 and hit a few balls into a backyard net. The heat map concept is a graphical representation of efficiency (smash factor) loss mapped onto the face of the club. As I understand it to make the representation agnostic to swing speed or other golfer specific swing characteristics. It is more a graphical tool not a data tool. The areas are labeled numerically in discrete 1% increments while the raw data is changing at ~0.0017%/mm and these changes are represented as subtle changes in color across those discrete areas. The only data we care about in terms of the heat map is the 1.3 to 1.24 SF loss and where was the strike location on the face - 16mm heal and 5mm low. From the video the SF loss is 4.6% looking up 16mm heal and 5mm low on the heat map it is on the edge of where the map changes from 3% loss to 4%. For that data point in the video, 16mm heal, 5mm low, 71.3 mph swing speed (reference was 71.4 mph), the distance loss was 7.2% or 9 yards, 125 reference distance down to 116. However, distance loss is not part of a heat map discussion. Distance loss will be specific to the golfers swing characteristics not the club. What I was trying to convey was that I do not have enough information to determine good or bad. Are the two systems referencing strike location the same? How accurate are the two systems in measuring even if they are referencing from the same location? What variation might have been introduced by the club delivery on the shot I picked vs the reference set of shots? However, based on the data I do have and making some assumptions and guesses the results seem ok, within reason, a good place to start from and possibly refine. I do not see what is wrong with 70mph 7 iron, although that is one of my other areas of questioning. The title of the video has slow swing speed in all caps, and it seems like the videos I watch define 7i slow, medium, and fast as 70, 80, and 90. The whole question of mid iron swing speed and the implications for a players game and equipment choices is of interest to me as (according to my swing speed meter) over my ~decade break I lost 30mph swing speed on mine.
    • Maxfli, Maltby, Golfworks, all under the Dicks/Golf Galaxy umbrella... it's all a bit confounding. Looking at the pictures, they all look very, very similar in their design. I suspect they're the same club, manufactured in the same factory in China, just with different badging.  The whacky pricing structure has soured me, so I'll just cool my heels a bit. The new Mizuno's will be available to test very soon. I'm in no rush.  
    • Day 23 - 2026-01-12 Finally outdoors again with 10 minutes of 7 iron work in the net. Also mirror work. Excited to get back on the range tomorrow and maybe do some film.
    • Day 10: 2026.01.12 Hit 25 balls at the range, working on rotating right hip during backswing.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.