Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 1299 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Just because he is an 18 handicap also doesn't mean that he can't hit them. There can be other points in his game that are lacking, but iron play might be good.

Yes, I agree that his iron play could be good, but other points of the game might be lacking. However, at an 18 I would guarantee that there is some poor iron play happening. Just like in my rounds as a 10.....

Hitting your woods off the deck has a minimal effect on your handicap. How often do you hit a FW wood off the deck during a round? 3 maybe 4 times.

R9 460 9.5
R9 3-Wood
Irons AP1 4-PW
Wedge X-Forged 62*, 56*, 50*
Studio Select 34" MS Newport 2 TP Red


Posted
Yes, I agree that his iron play could be good, but other points of the game might be lacking. However, at an 18 I would guarantee that there is some poor iron play happening. Just like in my rounds as a 10.....

Umm I have to hit my 3W almost every hole, at least more then 3-4 times. I play courses that don't have a lot of Par 3's and I don't hit my driver that far. My drives average anywhere from 200 (if I top the ball) to 250 if I hit it solid. I might be able to hit it farther but that is rare. Either way I have to hit my 3W a lot. A lot of times I end up topping the ball and it goes maybe 20 yards. I walk up to the ball and attempt a better swing in order to practice. Sometimes I will top it again and sometimes I will get a clean hit. So yes, it adds a lot of strokes to my round.

Bag: Corza Stand Bag
Driver: Launcher 460 Comp 9.5
Woods: Burner 3/5
Irons: TA7 Tour 4-PW
Wedges: 588 Tour Action 51*/57*Putter: Two bar blade center shaft


Posted
Umm I have to hit my 3W almost every hole, at least more then 3-4 times. I play courses that don't have a lot of Par 3's and I don't hit my driver that far. My drives average anywhere from 200 (if I top the ball) to 250 if I hit it solid. I might be able to hit it farther but that is rare. Either way I have to hit my 3W a lot. A lot of times I end up topping the ball and it goes maybe 20 yards. I walk up to the ball and attempt a better swing in order to practice. Sometimes I will top it again and sometimes I will get a clean hit. So yes, it adds a lot of strokes to my round.

Honestly, this is what lead me to taking the woods OUT of my bag, and replacing them with the hybrid. Sure, I give up a couple dozen yards, but the confidence and consistancy I gain is definitely worth it. If I hit a bad tee shot (getting rarer, but they happen) the last thing I want to do is follow it up with a crappy FW shot off the grass.


Posted

Current Bag
Ogio Synchro cart
'07 Burner Driver, 3 Fairway, and Rescue 5
Early Titelist Cavities
200 56, Spin milled 60 , Rossa  Suzuka


Posted

OH MAN!!! I have that same putter! It's an old Ray Cook model, right? That's funny you have the same one. Mine looks in the exact same shape as well. I've never come across someone else who had the same putter.

I've had mine for probably 15 or so years now and constantly get made fun of for it on the course nowadays with all the new style putters out there.

Posted
Attachment 2063

All TaylorMade except Rife Putter.

In My University of Kentucky Bag:

R9 460
R9 T3
TP Rescue 17, 21 degree R7 TP 3-PW W/ Project X 6.0 Rac Z TP Wedges 50, 54, 58 Rife Two Bar Hybrid Mallet TP Black Pro V1


Posted

There are a couple Vokeys also.

Driver.... Nickent DX Evolver V2 65 stiff /07 Burner YS6+ stiff .
4 wood..... Nickent 4DX
Hybrids.....Tour Edge Geomax 22* 25* 28*
Irons.....TM R7 6-P + AW,SW,LW
Putter.....Odyssey White Hot XG 2 BallBag.......Callaway ORG 14 A.L.I.C.E. Ball........Bridgestone e6 / Srixon Soft Feel...


Posted
There are a couple Vokeys also.

No, that is a 52

TaylorMade Rac TP Y, 54 TaylorMade Rac TP Z, and a TaylorMade Rac TP Y 58......Actually! Like I said, ALL TaylorMade except for the Rife putter.

In My University of Kentucky Bag:

R9 460
R9 T3
TP Rescue 17, 21 degree R7 TP 3-PW W/ Project X 6.0 Rac Z TP Wedges 50, 54, 58 Rife Two Bar Hybrid Mallet TP Black Pro V1


  • 2 months later...
Posted

I finally got around to snapping some pics for a WITB. It's cloudy out and the lighting is poor but you get the general idea.



As indicated in my signature, my bag contains the following...

Driver: Callaway 9.5' FT-5 Tour N I-Mix w/Diamana WB 73 S
Fairway Woods: Titleist 13' or 18' 909F3 D3 w/Matrix Ozik Code 8 S

The driver is a stock I-Mix FT-5 with a Diamana WB 73. This will likely be replaced sometime in 2010 w/the new FT Tour (if the FT Tour proves to be a worthy upgrade anyway) or another "smaller" driver (never have been a huge fan of the 460cc heads).

The fairway woods have both been custom built starting with stock clubs from Titleist. Shafts have been spine aligned and play just a tad stiffer than "stock S-flex". The swingweights are set to D3 (4g of hot melt added to 18' for swingweight adjustment). The 18' fairway wood is my 15th club so it shares time in the bag booting either the 13' fairway wood or 3-iron depending on course, conditions, etc.

All of my woods are gripped with Golf Pride Tour Velvet Cords.





Irons/Wedges: Scratch TD SB-1 3-PW D/S D2/D3, 52' SND D4, 56' SFU D5 & 60' EGG D6 w/S300

My SB-1's were also custom built. Shafts in all irons and wedges have been spine aligned and are Dynamic Gold S300's playing true to flex. 3-9 irons swing at D2, the PW comes in at D3.

My wedges are also Scratch, this time from the Tour Department. Lofts, grinds and swingweights are indicated above. Later I spine aligned the shafts and adjusted the swingweights to my preference after coming from the Scratch Tour Department lighter than ordered (I ordered them as D4, D5, D6 and they showed up D2, D4, D4).

All of my irons/wedges are also gripped with Golf Pride Tour Velvet Cords.







Putter: Scotty Cameron 33" Studio Select Newport

My putter is an OTR Scotty Cameron Studio Select Newport at 33" w/the red cord grip. Factory Scotty headcover has been swapped in favor of an Odyssey headcover since I really didn't like the added bulk or velcro found on the Scotty headcover.

I have two of these putters, one stays in the bag the other stays at home for practice around the house. The "gamer" is pictured below.

I love this putter but the graphics and extensive stamping annoy me to a point. As you could likely tell from the rest of my set, I like simple and clean. A more "traditional" satin chrome is just fine by me and I don't want or need a lot of stamping and graphics. Due to that rather small annoyance, I'll likely have a custom SSB made to duplicate my Cameron in form and (hopefully) function. Of course, if I do this, it will be clean w/very few markings. For now however, the Cameron sinks enough puts to stay in the bag despite the minor annoyance.





Well, that's my bag for the start of 2010.

  • Like 1

Yonex Ezone Type 380 | Tour Edge Exotics CB Pro | Miura 1957 Irons | Yururi Wedges | Scotty Cameron Super Rat | TaylorMade Penta


Posted
Get them thangs DIRTY!!!

:tmade: R15 14* Matrix Black Tie 7m3

:adams: Speedline Super S 3w & 5w Matrix Radix HD S VI

:callaway: X-12 4-PW Memphis 10

IONNOVEX  Type S GDT 50*, 54* & 62* Mitsubishi Rayon Kuro Kage Black 80ir

:odyssey: Tri-Ball SRT

-Landon


Posted
Get them thangs DIRTY!!!

I wish that I could, it's -8' outside right now.

I got them all pretty well cleaned up for the pics (except for the woods, oh well). The face pic of the 6-iron was taken when new which is why that looks the way that it does.

Yonex Ezone Type 380 | Tour Edge Exotics CB Pro | Miura 1957 Irons | Yururi Wedges | Scotty Cameron Super Rat | TaylorMade Penta


Posted

That's the bag I want! Great pics...just what I was looking for!

Hi everyone, I'm new in this forum. Here is my club set.

ogio.gif Black/White Ozone Stand bag, Caddytek 13.5 Black/Red Push Cart

taylormade.gif RBZ Tour 9* Stiff / ping.gifRapture 3 'metal' Titanium 14* Stiff Aldila Proto VS 'By You'
adams.gif Hybrid A2 20*3 hybrid Stiff Aldila VS / ping.gifRapture Black Dot 4-PW Stiff / cleveland.gifWedges CG11 54* SW / taylormade.gif RAC 52*, 58*Wedge / odyssey.gif  33" White Hot XG


Posted

Here are my sticks. I took these pics as I looked out to 2 ft of snow on the ground..........



These are not in my bag but next to my bag in the winter.

In My Bag
Driver: 907 D2 10.5 degrees Aldila VS Proto
3 Wood: 906 F4 15.5 degrees Aldila VS Proto
Hybrid: Idea Pro 20 degrees Aldila VS Proto
Irons (3-P): i5Wedges: Vokey 52.8 and Vokey Spin Milled 56.10Putter: Studio Style NewportBall: Pro V1x or NXT Tour


Posted
Here are my sticks.

Couldn't see your sticks for all the baby blue crap!

:tmade: R15 14* Matrix Black Tie 7m3

:adams: Speedline Super S 3w & 5w Matrix Radix HD S VI

:callaway: X-12 4-PW Memphis 10

IONNOVEX  Type S GDT 50*, 54* & 62* Mitsubishi Rayon Kuro Kage Black 80ir

:odyssey: Tri-Ball SRT

-Landon


Posted
Couldn't see your sticks for all the baby blue crap!

Haha, yeah yeah, can't help it if I am a huge Carolina Tar Heels fan.

:cobra: Amp Driver 10.5*(R)
:tmade: Burner 3W 15*(R)
:tmade: Burner 2.0 Rescue 3-4
:titleist: 714 AP1 Irons 5-pw, gw(Steel XP95 R300)
:callaway: MD3 Wedges 56, 60
:nickent:Omen Long Putter(un-anchored)


Posted

Here's mine...

Here's the list of what I'm currently carrying in my 10 year old Nike stand bag.

Driver: Taylor Made '07 Burner w/ PL Red
3 Wood: Tour Edge Exotics XCG-V 3 Wood 15* w/ Aldila Voodoo
Hybrids: Tour Edge Exotics XCG-V Hybrid 18* & 21* w/ Graphite Design Tour AD
Irons: Mizuno MP-52 5-PW (2* Flat) w/ DGS300
Wedges: Titleist Vokey Spin Milled 52* 56* 60* (3* Flat)
Putter: Odyssey White Hot #5

























Posted
Driver 905R 569 10.5*
3 wood exotic xcg3 15*
hybrids exotic xcg3 18*
rapture 21*
Irons AP1 4-pw
wedges AP2 gap
mizuno 54 & 58* japanese tour issue

Driver: Wishon 959 OL v2 reg 10.5*
fw wood 949 mc 16.5 4 wood


irons: AP1 5- gap GS 95 regular

multiple wedges


Note: This thread is 1299 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 152 1-12 More reps bowing wrists in downswing. Still pausing at the top. Making sure to get to lead side and getting the ball to go left. Slow progress is better than no progress.  
    • Yea, if I were to make a post arguing against the heat map concept, citing some recent robot testing would be my first point. The heat map concept is what I find interesting, more on that below. The robot testing I have looked at, including the one you linked, do discreet point testing then provide that discrete data in various forms. Which as you said is old as the hills, if you know of any other heat map concept type testing, I would be interested in links to that though! No, and I did say in my first post "if this heat map data is valid and reliable" meaning I have my reservations as well. Heck beyond reservations. I have some fairly strong suspicions there are flaws. But all I have are hunches and guesses, if anyone has data to share, I would be interested to see it.  My background is I quit golfing about 9 years ago and have been toying with the idea of returning. So far that has been limited to a dozen range sessions in late Summer through Fall when the range closed. Then primarily hitting foam balls indoors using a swing speed monitor as feedback. Between the range closing and the snow flying I did buy an R10 and hit a few balls into a backyard net. The heat map concept is a graphical representation of efficiency (smash factor) loss mapped onto the face of the club. As I understand it to make the representation agnostic to swing speed or other golfer specific swing characteristics. It is more a graphical tool not a data tool. The areas are labeled numerically in discrete 1% increments while the raw data is changing at ~0.0017%/mm and these changes are represented as subtle changes in color across those discrete areas. The only data we care about in terms of the heat map is the 1.3 to 1.24 SF loss and where was the strike location on the face - 16mm heal and 5mm low. From the video the SF loss is 4.6% looking up 16mm heal and 5mm low on the heat map it is on the edge of where the map changes from 3% loss to 4%. For that data point in the video, 16mm heal, 5mm low, 71.3 mph swing speed (reference was 71.4 mph), the distance loss was 7.2% or 9 yards, 125 reference distance down to 116. However, distance loss is not part of a heat map discussion. Distance loss will be specific to the golfers swing characteristics not the club. What I was trying to convey was that I do not have enough information to determine good or bad. Are the two systems referencing strike location the same? How accurate are the two systems in measuring even if they are referencing from the same location? What variation might have been introduced by the club delivery on the shot I picked vs the reference set of shots? However, based on the data I do have and making some assumptions and guesses the results seem ok, within reason, a good place to start from and possibly refine. I do not see what is wrong with 70mph 7 iron, although that is one of my other areas of questioning. The title of the video has slow swing speed in all caps, and it seems like the videos I watch define 7i slow, medium, and fast as 70, 80, and 90. The whole question of mid iron swing speed and the implications for a players game and equipment choices is of interest to me as (according to my swing speed meter) over my ~decade break I lost 30mph swing speed on mine.
    • Maxfli, Maltby, Golfworks, all under the Dicks/Golf Galaxy umbrella... it's all a bit confounding. Looking at the pictures, they all look very, very similar in their design. I suspect they're the same club, manufactured in the same factory in China, just with different badging.  The whacky pricing structure has soured me, so I'll just cool my heels a bit. The new Mizuno's will be available to test very soon. I'm in no rush.  
    • Day 23 - 2026-01-12 Finally outdoors again with 10 minutes of 7 iron work in the net. Also mirror work. Excited to get back on the range tomorrow and maybe do some film.
    • Day 10: 2026.01.12 Hit 25 balls at the range, working on rotating right hip during backswing.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.