Jump to content
Subscribe to the Spin Axis Podcast! ×
Note: This thread is 5697 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Reading the front page article "Accessorize.." got me thinking about tees. Do the specialized new tees actually make a big difference?

The old school wooden ones have worked fine for so long - but if there is something better I'd be willing to give it try. The "science" behind them at least makes sense.

I found one of the zero friction tees and truthfully I didn't notice any difference, but my playing partner did like it. I'm interested in trying one of the brush tees, but again, does it actually do anything?

Ive tried those brush tees before but they dont last very long, brushes get worn out and wont hold the ball up, constantly trying to keep the ball from falling off. I usually just use the old wooden tees, i doubt the zero friction tees make a noticeable difference. I pretty much get one shot out of a tee before I break it or lose it so I just get whatever is cheapest.

In my bag
Driver-top flite cannon 460 cc 10.5 deg, reg flex
3 Wood-ACUITY GOLF RCX 14°
3h-warrior golf tcp 20°
4h-warrior golf tcp 23°5h-warrior golf tcp 26° 6-pw-AFFINITY / ORLIMAR HT2 SERIES irons steel shafts regular flex56° sw-tour seriesram puttergolf balls-intech beta ti


I used the zero friction tees because I got a deal on them. They are tall and skinny, and because of this they break very easily. I usually get one swing out of them and then they chip a bit if not break in 2 pieces. I haven't really noticed too big a difference however it may add confidence on the tee

Driver - Titleist 975 LFE Fujikura 70x
Old driver (broken and not using) - Ping G2, Aldila NV-65 Stiff flex
3 Wood - Cobra X-speed 13 degree, stiff
2 hyrbid - Nickent 3DX DC Ironwood 17 degree
4 hyrbid - Mizuno CLK Fli-Hi 23 degree4-6 irons - Taylormade Rac HT7 iron-PW - Mizuno Mx-25GW -...


My take is that it is all marketing hype. My game is not good enough to notice the difference. If it was that good, the pros would be the first to jump on the bandwagon.

Don

:titleist: 910 D2, 8.5˚, Adila RIP 60 S-Flex
:titleist: 980F 15˚
:yonex: EZone Blades (3-PW) Dynamic Gold S-200
:vokey:   Vokey wedges, 52˚; 56˚; and 60˚
:scotty_cameron:  2014 Scotty Cameron Select Newport 2

Awards, Achievements, and Accolades

I use zero friction tees not because I think they'll help me hit the ball better but because for me, they are impossible to break. It's nice only have to carry a couple tees in your pocket and not have to go searching in the bag like I had to do almost every hole when I used wood tees. I'm sure other people don't have that problem but for me zero friction tees are a conveniance that I've gotten used too.

  • Administrator
  juanjohn said:
I use zero friction tees not because I think they'll help me hit the ball better but because for me, they are impossible to break.

That's why I use them too. I'll use one for a hundred tee shots or more before it'll break. It is nice to have 2 or 3 tees only in your pocket.

Couldn't care less about the "added distance." Don't care or know if it exists. Just like that they don't break.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

I just use 2.5 inch wood tees. I only use those for my driver and I stick basically the tip into the ground so incase I catch it too low, it won't snap. I lose more than I break now-a-days. I did pick up a couple zero friction tees and did like that they didn't break very easily, but I find less attatchment to those little wooden ones which are like 3 or 4 bucks for 150 of them.
Awards, Achievements, and Accolades

I only go with the wooden 2 3/4 inch tees. I break them but they are cheap anyway and I dont mind buying them. The zero friction tees dont seem to change my tee shots at all when I tried one I found.

In my Xtreme Sport bag
'09 Burner 9.5*
F50 15* 3 Wood
Burner 18* 5 Wood
MX-19 4-GW SV Tour 54.12 & 58.08 White Hot 2-Ball SRT


The plastic zero friction tees are wonderful. I would buy a bunch if I could find'em. However, the wood ones splinter on me in very short order. In dry conditions they might last two holes for me. Might...

Out of all the "specialty" tees, I like the stinger tees, but I haven't bought any more since my supply ran out months ago. It's just not worth it.

well since i managed to break all my brush tees (they lasted a good 2 seasons)...
ive been using zero friction tees lately...
i have a love hate thing going with tees right now...
brush tees are great cuz they give you a consistent tee height and last awhile... but once they start going it gets really frustrating trying to put a ball on top of one of those things

zero friction tees are great cuz they last forever... but they are pretty skinny and when you have a hard teebox its a real pain getting those things in the ground... plus i have to put my driverhead beside it to measure tee height

regular wooden tees... you cant beat the price... but... they break really easy and its best to have diff sizes... they also leave marks on your driver face if you get diff colored ones

im still gonna buy a new set of brush tees... but i can hold off for the rest of the season without them cuz i have a bag full of zero friction and regular tees
RUSS's avg drive - 230yrds and climbing

  flopdarock said:
i have a love hate thing going with tees right now...

i agree with flop i personally prefer orange brush tees,o and a downside to zero friction tee top of them seem to stab me alot while in my pocket.

My club pro recently handed me 3 of the Zero Friction tee's right before I went out to play a round. I like them, but not for a change in distance or control, I just like the fact that they do not break. I've been using the same one now for 3 weeks. They're a little more expensive, but I think it's worth it.

In my bag:

Driver: Rapture
FW Woods: T-Zoid
Irons: DCI Oversize +Wedges: Nicklaus Wedges (GW,AW,LW)Putter: Pure RollBall: Burner LDP


+1 for the zero fiction tees and the fact they last longer than the wooden tees and are harder to break.

Driver: Rapture V2 9* | Fairway woods: Rapture V2 4w | Irons: G10 4-UW | Wedges: 56* | Putter: Redwood Anser | Ball: | Bag:


  iacas said:
That's why I use them too. I'll use one for a hundred tee shots or more before it'll break. It is nice to have 2 or 3 tees only in your pocket.

If everyone copied your example there wouldn't be any little tee bits sitting in front of the tee boxes, and I would have

nothing to use on par 3's. Next thing you're going to tell me is to bring my own, and I don't want to hear it.

  iacas said:
That's why I use them too. I'll use one for a hundred tee shots or more before it'll break. It is nice to have 2 or 3 tees only in your pocket.

Exactly the same reason I use the Epoch tees. I bought a bag at the start of the year, have played somewhere around 80 rounds, and have at least enough to last me the rest of the year. I'd have more if my regular playing partner didn't need to borrow one every round.

I've broken exactly one. I lose them sometimes, and I've had a few "wear out"-the edges of the top get rounded over and a ball has a hard time sitting up there. But yeah, I enjoy the simple fact that I can throw one tee in my pocket and go.

In my Vaporlite Bag
Driver: Hireko PowerPlay Q2 10.5*
3 Wood: SS 3.5 14*
20* Hybrid: 3dx
Irons: 804 OS 4-PWWedges: 52* Vintage Forged 54* Vokey Spin-Milled 58* Vokey Raw Putter: Crossbax 2.0Ball: Gamer or D2 Feel


I find painted tees last longer the the wood colour tees. I like to play with the tee with little painted line on them as I find it helps me tee it up to a the same height each time. I average about 3/4 of round with one tee
Driver R7 Superquad NV 55 shaft or Bridgestone J33 460 NV 75 shaft
3 and 5 Wood X
Hybrid original Fli Hi 21* or FT 22*
Irons AP2
Wedges Vokey 52* - 8 , 56* 14, 60*-7Putter California CoranodoBall TP RedGPS NeoRange Finder- Bushnell Tour V2 When Chuck Norris puts spin on the ball, the ball does not...

I've played last round with these tees and they're so great. I only needed one throughout all the round, and you don't have to bother yourself about the teeing level, it's just the same distance from the ground every time. This equals more consistency.
My achievements:
Eagles: 0
Birdies: 18
Best Round: 89

I just use smallish wooden tees. I only put the very tip in the ground when I hit driver and don't seem to break them all that often when I tee up an iron or hybrid. I agree that longer wooden tees break way too easily but it's not an issue with the smaller ones.

Note: This thread is 5697 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • There are so many videos comparing and contrasting everything that I am both overwhelmed and more than a bit skeptical. Your comments above are much more valuable than hours of you-tube videos. Generally speaking, I’d much prefer to read something that someone took the time and trouble to write (such as your comments) than a bunch of videos, or worse, meaningless reviews that seem like they are all cut and paste selections of the same script. I’m more of a RTFM type than a watcher of “instructional” videos. By way of explanation, I don’t watch TV either.  So thanks - I’ll take that under advisement. I have an H3 that I bought for $10 that I’ve been carrying around but not sure why. Seems like a cool club, but I just don’t really know what to do with it. 
    • I was using the window as a mirror. Just trying to be a more aware of the feels for a better backswing. Trying to not be as closed from A1 to A2. Then not letting the club head flip inside. What I was feeling was a pressure my right wrist, and like the palm of my right hand was pushing upward against the grip of the club. My right hand was the underside of the swing path.  Going to play around with this a bit more. It looked pretty decent with mirror/window work. Just wanted to jot it down. 
    • Day 4: 3/26/25 Par4Success workout followed by putting through 50 mm gates.
    • Day 249: did a stack putting session and then worked on 5 foot putts for a bit. 
    • Day 17 (26 Mar 25) -  Big day working on a project at church - therefore it was grab some time with the 9i in the backyard working on pitch and runs later in the day.  Focused on keeping the ball flighted to get some good rollout.  Hit about 20 shots doing that and then moved to the 54 to keep working on getting good torso rotation and not flipping through it.  Was not perfect as there were some bloopers and fliers but overall a good session on distance control.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...