Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5931 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
My 3 and 5 woods need new grips.

I can hit them pretty good but the local pro-shop are charging 30 euro (40 dollars) for re-gripping the 2 cubs.

I was wondering about purchasing a 4 wood instead.

What do you think?

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
Why not regrip them yourself? It's very easy and very cheap. I regrip my clubs myself every year for the fraction of the cost of having them done by others.

Don

:titleist: 910 D2, 8.5˚, Adila RIP 60 S-Flex
:titleist: 980F 15˚
:yonex: EZone Blades (3-PW) Dynamic Gold S-200
:vokey:   Vokey wedges, 52˚; 56˚; and 60˚
:scotty_cameron:  2014 Scotty Cameron Select Newport 2

Awards, Achievements, and Accolades

Posted
Why not regrip them yourself? It's very easy and very cheap. I regrip my clubs myself every year for the fraction of the cost of having them done by others.

http://golf.about.com/od/golfclubsco...pgolfclubs.htm Seems pretty complicated and I'd need to get a lot of stuff to do it. Is there a simpler way to do it?

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
I haven't read your link, but here is what I do:
1. Purchase grips, a regripping solvent and a double sided tape. All are available in any golf shop.
2. Remove old grips. If your club has metal shaft, this is simply slicing the grips with a knife.
If you have a graphite shaft, you need to hold the grip up a bit while cutting it with a knife.
Once you do one, it becomes very easy.
3. Clean the shaft by removing old dbl sided tape, etc.
4. Wrap the dbl sided tape to the cleaned shaft. I wrap it like a barbershop sign. Plug the small hole in the butt of the new grip with a tee.
5. Pour a small amt of the regripping solvent into the plugged grip.
6. Remove the protective layer from the dbl sided tape and pour some regripping solvent onto the expose dbl sided tape.
7. Slide the grip (which has a small amt of regripping solvent inside) onto the shaft. This is easy when the shaft and the grip have the regripping solvent on them.
8. Reposition the grip, if necessary.
9. Let it set for at least 24 hrs.

That's it. Like I said, after you do one it is so easy you'll wonder why anyone would pay to have it regripped.
6.

Don

:titleist: 910 D2, 8.5˚, Adila RIP 60 S-Flex
:titleist: 980F 15˚
:yonex: EZone Blades (3-PW) Dynamic Gold S-200
:vokey:   Vokey wedges, 52˚; 56˚; and 60˚
:scotty_cameron:  2014 Scotty Cameron Select Newport 2

Awards, Achievements, and Accolades

Posted
I haven't read your link, but here is what I do:

Basically the same as the link.

Doesn't seem hard and It'll save me a lot of money. I'll try it out. Thanks!

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


  • Administrator
Posted
That's it. Like I said, after you do one it is so easy you'll wonder why anyone would pay to have it regripped.

I can regrip, but for $1-2 or whatever the guy I uses charges, sometimes it's not worth the time. He's making money on the grips too (in bulk).

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
When it's cheap, I agree, but some take outrageous prices for work like regripping, adjusting loft, lie etc.

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Awards, Achievements, and Accolades

Posted
When it's cheap, I agree, but some take outrageous prices for work like regripping, adjusting loft, lie etc.

Really, i just had my putter lie adjusted for $5. Scotty Cameron might charge $45 to do it, but at most golf superstores they do it on the cheap.

In my bag:

Driver: Titleist TSi3 | 15º 3-Wood: Ping G410 | 17º 2-Hybrid: Ping G410 | 19º 3-Iron: TaylorMade GAPR Lo |4-PW Irons: Nike VR Pro Combo | 54º SW, 60º LW: Titleist Vokey SM8 | Putter: Odyssey Toulon Las Vegas H7

Awards, Achievements, and Accolades

Posted
... but the local pro-shop are charging 30 euro (40 dollars) for re-gripping the 2 cubs.

Is the pro shop giving you grips embedded with gold threads? That's really expensive. Golf Galaxy would do both $20 or less grip plus installation. (Generally less unless you get a really pricy grips).

Take Yukari's advice and regrip it yourself. Also... you might start a cottage industry regripping for friends if the pro shop charges that much. You could be Limerick's entrepreneur of the year....

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha B16 OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:  image.png.0d90925b4c768ce7c125b16f98313e0d.png Inertial NM SL-583F, 34"  
Ball:  :srixon: QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted
Is the pro shop giving you grips embedded with gold threads? That's really expensive. Golf Galaxy would do both $20 or less grip plus installation. (Generally less unless you get a really pricy grips).

lol thanks.

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Note: This thread is 5931 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
    • Day 56 (4 May 26) - Worked on some ball-then-ground drills - going from P3 thru impact - with a slowed tempo, working to keep all parts in sync.   
    • Wordle 1,780 3/6 🟩⬜🟨🟨🟨 ⬜⬜⬜⬜⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,780 4/6 🟨⬜⬜⬜🟨 ⬜🟨🟨🟨⬜ 🟩🟨🟩🟨⬜ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.