Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5892 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Late last year, I stepped on my gap wedge (Adams cheep-o) and bent the shaft while stepping back to line up a putt. Since I was considering an upgrade anyway and the cost to repair is half the cost of a new one...

I read a promising review of the TMade wedges on here, so I headed off to Dicks to try one out. I hit several dozen shots with it, a Cleveland CG12, and a Nike SV Tour just for comparison. The one that felt the best was the Nike. Unfortunately, the launch monitor did not register most of the shots, so I have no data to back up my experience. I know that Vokey's are all the rage and I have not ruled them out, but was pleasantly surprised with the Nike Wedge. Thoughts.

- Shane

Awards, Achievements, and Accolades

Posted
I play the Nike SV tour wedges and absolutely love them. They feel great for me. I never played any of those mentioned wedges so i cant compare those.

In my Ogio Budlight Bag
Taylormade R11 Driver | Big Bertha Diablo 3W | Tight Lies 5W & 7W |
Big Bertha Diablo 24 degree hybrid | Slingshot 4D 5-PW, AW Irons | SV Tour 56* wedge |
Detour Newport 2 | Noodle Ball | Golf Logix GPS


Posted

I'd say you buy what felt right ...if the Nike felt the best to you, then why not go with that?? I think either way you cant go wrong, they're all good wedges. I have tried a bunch of wedges in the past and for some reason my go to wedge is always my Pure Spin 56 ... It's the cheapest wedge I have ever bought($14 ebay) but I know i can put the ball where it needs to be with it, so I have stuck to it for the past 4 years.
It's not about the brand..it's about what feels good in your hands and how well you can hit it.

P.S.
you gonna sell the head of the Adams wedge?

.........In My Bag........
Driver = FT-IQ Tour
2,3,4 = Iron/Wood = Bazooka Jmax

Putter = T.P. Mills
Irons = A4 OS..Wedges = Pure Spin..Cart Bag = .....Stand Bag = Bennington


Posted
Just purchased a 52 and 56 SV wedge. I tried out quite a few and these felt great. Might consider the 60 degree later in the summer. Buy what feels good and you will have confidence in.

titleist.gif Titleist 910 D3 - Project X 6.0 7C3 Shaft  |  adams.gif Adams XTD Super Hybrid - 15 degrees  
adams.gif Adams Idea Pro A12 Hybrid - 18 degrees 
Adams CB2 - KBS Tour Shafts - 4 - PW
vokey.gif Vokey 54.10 Oil Can  |  vokey.gif Vokey 60.07 Oil Can  |  rife.gif Rife Trinidad - SuperStroke


Posted
I'd say you buy what felt right ...if the Nike felt the best to you, then why not go with that?? I think either way you cant go wrong, they're all good wedges. I have tried a bunch of wedges in the past and for some reason my go to wedge is always my Pure Spin 56 ... It's the cheapest wedge I have ever bought($14 ebay) but I know i can put the ball where it needs to be with it, so I have stuck to it for the past 4 years.

I'm still playing with it till I'm comfortable with a new one, but once my inner demons are satisfied with the new club and whatever sacrifices I make... I have no problem letting it go.

- Shane

Awards, Achievements, and Accolades

Posted
I'd say you buy what felt right ...if the Nike felt the best to you, then why not go with that?? I think either way you cant go wrong, they're all good wedges. I have tried a bunch of wedges in the past and for some reason my go to wedge is always my Pure Spin 56 ... It's the cheapest wedge I have ever bought($14 ebay) but I know i can put the ball where it needs to be with it, so I have stuck to it for the past 4 years.

i just bought a nike sv tour 52 degree. havent had a chance to hit it yet but with nice weather coming this week i am planning to get on the course for the first time this year. my dad has 3 pure spin wedges in his bag and absolutely loves them.

Driver FT-i
3 Wood: C455
Hybrid Burner Rescue
Irons CPR
Wedges SV TourPutter TPI 25


Posted
If I were in the market for new wedges, the Nike SV would be near the top of a very short list.

One other thing to consider when buying wedges this year is the grooves -- if you think they make a difference for your game. Not because of rules directly, but because one type of grooves will be tough to find next year. If I were buying a new wedge this year, I'd probably make sure it's conforming to the new rules, just to avoid ever getting used to the "old" grooves (I doubt my form is good enough to matter, but just in case). Your performance and preference may vary on this count.

-- Michael | My swing! 

"You think you're Jim Furyk. That's why your phone is never charged." - message from my mother

Driver:  Titleist 915D2.  4-wood:  Titleist 917F2.  Titleist TS2 19 degree hybrid.  Tour Edge Exotics C723 21 degree hybrid.  Irons 5-U, Ping G400.  Wedges negotiable (currently 54 degree Cleveland, 58 degree Titleist) Edel putter. 

Awards, Achievements, and Accolades

Posted
I found some slightly used Nike V Red wedges (52, 56, and 60) for $35 ea. My friend has worked with this guy before and vouches for him. Anyone have experience with this series?

- Shane

Awards, Achievements, and Accolades

Posted
Those are some great wedges too! Call me crazy, but I have played Titleist, Cleveland, Nike and Taylor Made wedges and they ALL felt great! This go around, I've decided to go back to the Cleveland's.

My .02

Irons - nike.gif Forged Blades / Project X 7.0

Driver - nike.gif VR Pro Ltd. Edition 8.5° / FUBUKI Alpha 70x

Wood - nike.gif SQ 3+ 13° / Stock Diamana S-Flex
Wedges - cleveland.gif Tour Action Gunmetal Reg 588 54° & 60° / DG S400
Putter - White Hot XG 2-Ball F7

Bag - nike.gif SQ Tour Carry


Posted
I found some slightly used Nike V Red wedges (52, 56, and 60) for $35 ea. My friend has worked with this guy before and vouches for him. Anyone have experience with this series?

My buddy games em...loves em. (he's brand biased tho so there's a variable in there)...I hit his 56 and must say i thought it was a solid club too.

In my Titleist 2014 9.5" Staff bag:

Cobra Bio+ 9* Matrix White Tie X  - Taylormade SLDR 15* ATTAS 80X - Titleist 910H 19* ATTAS 100X - Taylormade '13 TP MC 4-PW PX 6.5 - Vokey TVD M 50* DG TI X100 - Vokey SM4 55 / Vokey SM5 60* DG TI S400 - Piretti Potenza II 365g


Posted
i've used the nike SV wedges, 56 and 60, for around 3yrs. i think they're unmatched in feel. i have a friend who plays cleveland wedges so i swing those every once in awhile and my nike's just have a better overall feel. i'm always glad i choose them over the competition.

that being said, i'm thinking of buying the mizuno mp T10 black satin 52* wedge, it looks great at address and if it feels good on the swing then it's going in the bag.

go with what feels right, you'll never go wrong.
callaway.gif FT-i 9*
nike.gif CPR Hybrid 18*
titleist.gif 735cm 3-PW
nike.gif SV 56*, 60*
odyssey.gif White Hot #8 

Posted
Those are some great wedges too! Call me crazy, but I have played Titleist, Cleveland, Nike and Taylor Made wedges and they ALL felt great! This go around, I've decided to go back to the Cleveland's.

Love that avatar! :)

- Shane

Awards, Achievements, and Accolades

Posted
I actually just bought a 60* on ebay and it should be coming this tuesday. I'm excited to try it out eventually because i've just been playing a cheap Niklaus 60* i bought on clearance from work that I don't think works too well, but I've also had it for 2 years and it probably got a brutal treatment lol, I take much better care of my clubs now. Either way I read good things about them and I figure 45 bucks isn't that much of a waste if I don't like it.

:cobra: Fly-Z+ White
:callaway: XR 3 Wood
:adams: Idea Pro Black 21*
:callaway: XR 4 Hybrid
:callaway: Apex 5, Apex Pro 6,7 Apex MB 8,9,P
:tmade: 50° Gap Wedge
:callaway: Mack Daddy 2 54° 58°
:nike: Method 001 33"


Posted
I'll second and third the recommendations that you go with what feels right. Not a Nike fan personally but hey...if you look down and like what you see then you're half way there.

With that said, there may be differences in the bounce between the models your looking at. That might be something to consider....

Driver - 983K 9.5* w/ YS-6 stiff shaft
3-Wood - 980F 15* w/ Titleist 4375 stiff shaft
5-Wood - 980F 18* w/ Titleist 4375 stiff shaft
Irons - X-20's - 4-PW
Wedges - 52*, 56*, 60* Putter - Black Series i 1 - Ball - B330rx


Posted
IMO at address the SV's look identical to a Vokey
different weight for me though

I was going to get these when i retired my vokeys
picked up some Callaway X-Tour Vintages instead
once you go forged you wont go back!

and they were oly $88 each brand new
"My swing is homemade - but I have perfect flaws!" - Me

Posted
I love mine. When I bought them, I chose the SV Tours over Vokeys because I preferred the S400 shafts and the Vokeys weren't offered in black. The look at address and feel was almost identical...if I remember correctly, the SV Tours and Vokeys are both crafted from 8620 carbon steel.
Callaway FT-9 Tour I-mix 9.5° Driver (Fujikura Zcom Pro 65 stiff)
Mizuno F-50 15° 3w (Exsar FS2 stiff)
Bridgestone J36 19° Hybrid (Aldila VS Proto 80 stiff)
Adams Idea Pro 23° Hybrid (Aldila VS Proto 80 stiff)
Adams Idea Pro Forged 5-pw Irons (DG Black Gold stiff)Nike SV Tour Black Satin...

Posted
Thanks! Right back atcha...

Irons - nike.gif Forged Blades / Project X 7.0

Driver - nike.gif VR Pro Ltd. Edition 8.5° / FUBUKI Alpha 70x

Wood - nike.gif SQ 3+ 13° / Stock Diamana S-Flex
Wedges - cleveland.gif Tour Action Gunmetal Reg 588 54° & 60° / DG S400
Putter - White Hot XG 2-Ball F7

Bag - nike.gif SQ Tour Carry


Posted
... I know that Vokey's are all the rage and I have not ruled them out, but was

I tested out the SV Tour 50* and 52* around Thanksgiving. Both felt good, but the head felt a little light for me. Got the CG14 instead. That said, I think the SV wedges would serve many golfers quite well.

My guess is the SV Tour would probably have an effective bounce that's less than rated bounce, since the sole is fairly thin. The SVs I hit came with a DG S400 shaft (a little on the heavy side). But, it went through ball crisply.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha B16 OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:  image.png.0d90925b4c768ce7c125b16f98313e0d.png Inertial NM SL-583F, 34"  
Ball:  :srixon: QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Note: This thread is 5892 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 254 5-4 Arms off chest in backswing and downswing. Short swing, pause and then hit.  Hit foam balls. Keeping arching of wrist a focus as well. 
    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.