Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5793 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I have a 2 year old Nike sumo driver and something's up with it. The last 2 rounds I played it felt like I mishit shots, but not sure why. Well, when I went to the range yesterday, I noticed the same thing. It's not making the same sound off the clubface anymore and feels softer almost. When I was playing Monday, I felt like I was hitting the ball less than usual, but I didn't have a great shot shape that day, so I don't know if I lost distance. I felt like it was a loss of distance at the range, but since the balls are different, it's not an accurate gauge like on the course

I looked for dents or cracks on the clubface, but couldn't spot any. Can a face go dead that quick? I don't beat the club off the ground or anything. My average drives are around 270 and I hit a few 300 yd. drives a round. That's only this year though. I was hitting less than that the last 2 years, but always close to 250.

Posted
It's possible definitely that the face is dead, but it's also possible that you are just hitting the ball off the toe or the heel.

In my bag:

Driver: Titleist TSi3 | 15º 3-Wood: Ping G410 | 17º 2-Hybrid: Ping G410 | 19º 3-Iron: TaylorMade GAPR Lo |4-PW Irons: Nike VR Pro Combo | 54º SW, 60º LW: Titleist Vokey SM8 | Putter: Odyssey Toulon Las Vegas H7

Awards, Achievements, and Accolades

Posted
That's the first thing I thought. But, even my dead straight perfect trajectory shots felt (and sounded) weird. I really hope it's not dead, I don't want to buy a new driver. I'm gonna go back to the range today and try to determine what's going on.

Posted
I have a 2 year old Nike sumo driver and something's up with it. The last 2 rounds I played it felt like I mishit shots, but not sure why. Well, when I went to the range yesterday, I noticed the same thing. It's not making the same sound off the clubface anymore and feels softer almost. When I was playing Monday, I felt like I was hitting the ball less than usual, but I didn't have a great shot shape that day, so I don't know if I lost distance. I felt like it was a loss of distance at the range, but since the balls are different, it's not an accurate gauge like on the course

I have had two drivers fail with cracks in the face over the last few years. Before the crack became visible (or detectable with the finger) the driver became erratic in both distance and direction. But it never did feel dead. It did however begin to make a different sound at contact before crack become obvious.

Butch


Posted
You might ask a pro at your driving range or club to hit a few shots with it.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha B16 OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:  image.png.0d90925b4c768ce7c125b16f98313e0d.png Inertial NM SL-583F, 34"  
Ball:  :srixon: QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted
i am having the same problem. so far i have
gotten impact strips to make sure im hitting the center of the face.
gotten my driver reshafted
bought a whole new driver.
changed the weights in it

the only think i can think of if a new driver doesnt work get a new driver but make sure you get the same version like im currently trying to find a callaway x460 tour

|callaway.gif X460 Tour Fujikura Tour Platform 26.3 73g | taylormade.gif 2i Rescue 11 |  3i HiBore Hybrid |  710 MB |  Wedge Works 48/06 |  cg12 52/08  | vokey.gifSpin Milled 56/11 | nike.gifSV Tour 60/10 | cameron.gif Studio Select Newport 2 34" |

 

rangefinder : LR550


Posted
You might ask a pro at your driving range or club to hit a few shots with it.

+1. This is what I would do.


Posted
You might ask a pro at your driving range or club to hit a few shots with it.

Good idea - get a pro to finish that POS off once and for good - or find out you need lessons. Win win.

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Posted
There was an older gentleman that belongs to the same course as I do at the range about 2 weeks ago. He had a Cobra driver(dont' recall the model) he had bought from some "play it again" store. Anyways, he couldn't hit it worth a crap and it sounded terrible, so he had me and another guy hit it. All three of us hit the same shots, line drives to the right about 160 yards. Now, that's a an 18 yr old, a 28 yr old, and a 70 yr old all hitting the same shots with this club.
To make a long story less long, he ended up finding a crack in the bottom of the club. Cobra did replace it though.

In my Nike Sport Cart Bag:
Driver: Burner SUPERFAST TP 10.5*
3 Wood Burner SUPERFAST
5 Wood SQ Dymo
Irons(4-GW) SZ Vokey Oil Can 56* 64* TP WedgePutter Oz Mallet 6Ball: ProV1x


Posted
Doesn't have to be a crack, the face cane cave in. Faces have a bulge in the niddle of the club so when you look ate the face from the bottom side view style it ill be shaped like this ( from sude to side although not nearly that drastic. If the face flattens then the club is dead.

Driver: Ping g15 axivcore black stiff
3 wood: Cobra s9-1 f speed
Hybrids: 20* adams speedline classic round and 24*v1 peanut
Irons: Ping I5 5-pw
Wedges : cg14 50*,54* spin milled 58*Putter: Cameron newport detour


Posted
yeah, it could be anything, sounds like a good excuse to buy another driver to me!!

In my Nike Sport Cart Bag:
Driver: Burner SUPERFAST TP 10.5*
3 Wood Burner SUPERFAST
5 Wood SQ Dymo
Irons(4-GW) SZ Vokey Oil Can 56* 64* TP WedgePutter Oz Mallet 6Ball: ProV1x


Note: This thread is 5793 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
    • Wordle 1,789 4/6* ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.