Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5704 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
anyone here gaming the Mizuno MP T-10 wedge? I just picked up one in the black satin finish. Looks great and felt really good hitting it off the matt in the store. (hate hitting wedges of matts)

I've always played Vokeys. I have recenrtly decided I'm going to ditch the 56 and 60 combo to get one 58 wedge. The Mizuno just looked and felt great.

Being a loyal Vokey guy, I need some insight to help me committ to going with it. Feedback on Mizuno wedges??

What I Play:

Driver: R9 460
4 Wood: G15

Hy: Callaway FT 3Hy

Irons: AP1 4-PW

Wedges: Vokey 52* & 60*, Mizuno MP-T 10 58*

Putter: Newport Studio Select 2.7

Ball: Nike One Vapor


Posted
I love my mizzy wedges! Ive played vokeys clevelands ect
Now ive got these wedges, I wont change to another brand I don't think, unless miz go cheep and don't forge anymore or somthing.

People are going to flame me for saying this but...
Vokeys are very cheeply made, they are not forged and they cost you a arm and a leg. The vokeys they play on tour are very different to the ones you buy in the stores. Mizuno wedges are forged in one of the best forging places in japan. They are great qulity.

You will be very happy with your new wedges, and even though they are the new grouves, im finding im getting ALOT of spin. I only wish they has some milled grouves though.

Driver: 909D3 8.5* Diamana White Board X
3 Wood: MP 630 15* GRAFALLOY PROLAUNCH RED X
Hybrid: 909H 19* "Real" VooDoo X
3 - P: MP-68 KBS Tour Black Nickel X
56* 10 Wedge Vr60* 06 Wedge: VrPutter: Custom Made.Golf Ball: TOUR B330SI am the greatest, I said that even before I knew I was....


Posted
I have an MP-R LW and I have to say that while I love the performance, the durability leaves me wanting much more. My guess is they aren't very durable because they are forged. Either way, my next LW will be a Scratch, the cast (and cheaper) version.

In my bag:

Driver: Titleist TSi3 | 15º 3-Wood: Ping G410 | 17º 2-Hybrid: Ping G410 | 19º 3-Iron: TaylorMade GAPR Lo |4-PW Irons: Nike VR Pro Combo | 54º SW, 60º LW: Titleist Vokey SM8 | Putter: Odyssey Toulon Las Vegas H7

Awards, Achievements, and Accolades

Posted
Mine work great for me. They behave wonderfully on a nice full shot, great feel, and as spinny as you want them to be. My 56 has been a godsend this year. I have more confidence in my 56 at 20 yards than I do with my putter at 20 feet. Nice to have that feeling, lets me be more aggressive on iron shots.

I can not give you the technical break down of the sole, but I can tell you I get great turf interaction and can open/close the face with very repeatable results. The 60 only comes out of the bag once or twice a round. The 56 is so versatile there aren't many spots I need to use the gap or 60. Weight and balance are superb for delicate touch shots. Definitely my favorite club in the bag right now.

I hit a bunch of wedges before I bought mine and like you, as soon as I hit the Mizuno....sold.

Just so you know that black finish will rust. I would have grabbed black if not for the built in rust finish.

Geomax 16 reg - driver
G10 17 4 wood reg
Sumo2 20 hybrid Reg
MX-100 4h, 5h, 6-gap Reg
MP T 10 56.10, 60.08Bullseye putter


Posted
Fantastic clubs. The feel is absolutely amazing. Has convinced me that my next set of irons and any future wedges must be from Mizuno.

I do have a personal complaint though. The grooves are HUGE. I guess I never actually caught onto the maximum groove width and depth thing before, but I get way too much spin out of lies that I expect none.

Besides that they are amazing wedges. I love the sole grind as well. It gives me an immense amount of forgiveness on short game contact.
Awards, Achievements, and Accolades

Posted
I have a 52, 56 and 60. I played Hogan before this and the Mizunos are the only ones I have tried that compare. Great feel, great look and positive leading edge. I have the black satin finish and love them.

Posted
Love my Mizuno MP T 10 52, 56, 60 wedges. Enjoyed previous Mizuno black ox and previous MP T series wedges as well, but the MP T10 are definitely better and provide more spin. Tried going with a 58 instead of 56/60 combo earlier this year then switced back due to the 60 performing better in short game. Can also play the 60 out of sand better than previous mizuno wedges. Vokeys are nice as well. If you already play mizuno irons you won't regret adding their wedges. The grooves like a previous poster mentioned are huge. I swear after one practice swing lots of grass is sticking to them and in the grooves which needs to be removed, didn't have that much of a problem on previous mizuno wedges. You'll definitely need a brush or wet towel when your playing with these wedges to keep them clean.

Posted
I like them. They have a pretty sharp leading edge, though, and you need to be comfortable with that.

Stretch.

"In the process of trial and error, our failed attempts are meant to destroy arrogance and provoke humility." -- Master Jin Kwon

Awards, Achievements, and Accolades

Posted
Thanks for the feedback, everyone! I'm going to go hit some flop shots and bunker shots on my way home from work. Hope it feels as good as it did in the store! Thanks again.

What I Play:

Driver: R9 460
4 Wood: G15

Hy: Callaway FT 3Hy

Irons: AP1 4-PW

Wedges: Vokey 52* & 60*, Mizuno MP-T 10 58*

Putter: Newport Studio Select 2.7

Ball: Nike One Vapor


Posted
Love me my Mizzy MP T-10 gap wedge. But, the black satin finish quickly wears off. And, you need to keep them dry or else the rust develops quickly as well (unelss you prefer the rust for asthetics or bite). But, the feel, swing weight, and feedback on these wedges are all great IMHO. Love Mizzy irons in general, and this does not disappoint. Have had it.

Note: This thread is 5704 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Haiduk - Archdevil        
    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.