Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5650 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I have a question. I just bought a new driver about 3-4 months ago. When I got fitted my average speed was around 104.something. Today I was at dicks trying the new Callaway driver. My average speed today was around 98.something. Of course when I bought my driver was in the season and I was swinging a club about everyday. Now where I live maybe once a week or so. Would not swinging all the time make that big a difference or did I unknowingly do something to slow down my swing?

Posted
Not swinging all the time could have an effect. You also might not have been as loose because it's cold out. Also if you haven't been playing a lot lately your swing just might notbe as efficient.

In my bag:

Driver: Titleist TSi3 | 15º 3-Wood: Ping G410 | 17º 2-Hybrid: Ping G410 | 19º 3-Iron: TaylorMade GAPR Lo |4-PW Irons: Nike VR Pro Combo | 54º SW, 60º LW: Titleist Vokey SM8 | Putter: Odyssey Toulon Las Vegas H7

Awards, Achievements, and Accolades

Posted
I have a question. I just bought a new driver about 3-4 months ago. When I got fitted my average speed was around 104.something. Today I was at dicks trying the new Callaway driver. My average speed today was around 98.something. Of course when I bought my driver was in the season and I was swinging a club about everyday. Now where I live maybe once a week or so. Would not swinging all the time make that big a difference or did I unknowingly do something to slow down my swing?

Question and a bit off topic, but when you got fitted with a 104 ss with the driver, did they put you in stiff or x-stiff? Thanks.

 

In my Mizuno Aerolite IV Stand Bag:

Driver: Titleist 910D2 (9.5°, RIP Alpha 70S)
Wood: Titleist 910F (15°, RIP Alpha 70S)

Irons: Mizuno MP-68 Irons (3 - PW, C-Taper S+), Mizuno MP-33 2 Iron (C-Taper S+)

Wedges: Vokey Spin Milled (56.11 - Bent to 54°, 60.07 Tour Chrome, C-Taper S+ DSS)

Putter: Scotty Cameron Newport 2 (34")

Ball: Titleist Pro-V1x

GPS: Garmin Approach g5

Most useful training aids (for me) that I use: Tour Striker Pro 7 Iron, Swingyde, Tour Sticks alignment sticks, Dave Pelz Putting Tutor


Posted
Also, I wouldn't trust the launch monitors at most big-box golf stores to be accurate. Could be set up wrong, could be deliberately juiced, could just be budget hardware.

Stretch.

"In the process of trial and error, our failed attempts are meant to destroy arrogance and provoke humility." -- Master Jin Kwon

Awards, Achievements, and Accolades

Posted
It could be the accuracy of the different stores equipment, calibration or could be the difference in the club head or shaft that is impacting your swing speed. Would be interesting to go back with your current driver and see what your numbers are there.

Joe Paradiso

Awards, Achievements, and Accolades

Posted
Question and a bit off topic, but when you got fitted with a 104 ss with the driver, did they put you in stiff or x-stiff? Thanks.

Said I was border line x stiff but I went with a stiff.


Posted
You can vary much just by being stiff one day. Nothing to really worry about. 98-104 is still within the realm of most stiff shafts.

« Keith »


Posted
Also, I wouldn't trust the launch monitors at most big-box golf stores to be accurate. Could be set up wrong, could be deliberately juiced, could just be budget hardware.

Unless that store would like 100 angry golfers coming back, they have absolutely no reason to juice their launch monitors.

Think about it. You're hitting 320 on the monitor (with unknowing 40 mph winds at your back) and you get outside and you're hitting it 250. That person is gonna be PISSSSSSED. Also that person needs a reality check that a new driver isn't gonna add 70 yards, but people are really that dumb.

Waiting out the 2 feet of snow that just dropped on the course....


Posted
Think of it like weight lifting. Some days you can lift more than others. Your swing speed works the same way. The more swings you take the more you loosen up and your swing speed increases (then it goes down as exhaustion sets in).

There is some overlap between using a stiff and X-stiff shaft but your speeds suggest stiff is optimum.

In my Bag:

Driver - SLDR 430 - 10.5 deg
3 Wood - SLDR HL
Irons - TM Tour CB's                                                                                                                                                                 Wedges - TM                                                                                                                                                                               Putter - Odyssey White Ice 2 Ball


Posted
Unless that store would like 100 angry golfers coming back, they have absolutely no reason to juice their launch monitors.

It's not uncommon for golf shops to have launch monitors that are mis-calibrated. I've been to Dick's where it was telling me I hit my 6 iron 190 yards and my driver 280-290 yards. That's nowhere near my actual yardages. So mis-calibrated launch monitors can be at fault.

« Keith »


Posted
I'm not a long hitter at all bit long enough. Of course being a guy it's never long enough. What is the best way to increase swing speed? I've heard that swinging a weighted club helps and have also heard it doesn't speed you up at all.

Posted
ive heard weighed clubs can help some, i think it might be good to help you warm up before a round, get the muscles loose before the first tee shot. I think i saw something called swingnature that Hank Haney was pushing earlier this summer, was a weighted shaft but you could also take weight out to make it a lighter club to train your muscles to swing faster. Just being stronger isnt enough, you have to be able to fire those muscles quickly to gain swing speed. If i could find one of those on ebay cheap enough or one of those momentus clubs as well(which i just saw minutes ago on the Golf Channel) id give it a try to warm up before the round. Although ive got a broken shaft sitting at home that would be great as a lightweight swing aid and its free, grip still in great shape.

Driver-Taylormade Burner Ti 420 cc 10.5 deg reg flex
3 wood-orlimar rcx 14 deg
Hybrids-warrior golf 20 deg, 23 deg and 26 deg
6-pw-AFFINITY / ORLIMAR HT2 irons steel shafts, reg flex, 56 deg tour series wedge
Putter-Rife 2 Bar Hybrid Mallet...


Note: This thread is 5650 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
    • Wordle 1,789 4/6* ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.