Jump to content
Subscribe to the Spin Axis Podcast! ×
Note: This thread is 3134 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I just got a set of face saver plus headcovers for my irons and it came with 3, 4, 5, 6, 7, 8, 9, PW and SW. I also have a Gap Wedge (GW) and Loft Wedge (LW) and there are no headcovers specifically for those wedges. It realy makes me mad that I can't have the correct covers for all of my clubs and XW just doesn't make it for me. Has anyone ever seen headcovers for the odd wedges?

  • 3 weeks later...
please don't put covers on your irons..they are meant to get banged up like any good instrument or tool. Covering them will just depress you when they evenually get dinged unless you cover them after each shot on the course which we don't want to go there on that as you sound like a nice guy

I like iron covers because they keep my new forged irons looking new. They only slow me down for a whole 2 or 3 seconds. I bought some neoprene ones from Walmart for about $8 and they fit my forged heads perfectly. I do wish an AW cover was included. I tried a neoprene iron cover set from eBay that included the AW cover, but they were a bit too loose, however, they would fit a game improvement iron with no problem though.

Im not a fan of those iron covers either. To me they look cheesy, but hey to eaches own.

Driver: Taylor Made R7 425 9.5° TP Stiff
Fairway: Taylor Made V-Steel #3 w/Fujikura Rombax Stiff
Irons: Taylor Made rac LT 4-PW shaft; Rifle Flighted 6.0
Wedges: Tayor Made rac 52° 56° 60°Utility: Taylor Made Rescue TP #3 (Aldila NV Hybid 85g Stiff)Putter: Scotty...


I used to use them just because I hated to listen to my clubs clank around in the back of my Jeep or when I carried my bag. I also thought that if I was going to sell my irons soon after buying them that it would keep them in better resale condition. But it was a pain in the ass.

Anywho, when I used them I didn't carry a 3 iron so I used a black Sharpie and blacked out the '3' and put the cover on my gap wedge.

I used to use them as well but realized I looked much cooler without :) Really though they were a pain in the Arse and I agree that the clubs were meant to get that worn look over time. Keeping the clean and the grooves brushed will go a long way. Just my 2 cents. I do not think they make covers for AW or GW

Taylor Made Burner TP 10.5*
Taylor Made Burner 15*
Taylor Made Burner 19*
Taylor Made Dual 19*
Taylor Made Dual 22*Srixon I-506 5pwSrixon WG 504 56*Callaway X Tour 60*Yes SophiaSrixon Z UR


  • 1 year later...
Lately Ive been considering getting iron covers and Ive read a few old threads on here about that subject and its clear that most people dont use iron covers and dont see a need to.
I guess what I dont understand is why you would put a headcover on a $300-$500 driver, a $200 fairway wood, a $200 hybrid and a $100-$300 putter, but you dont see the need for headcovers for your $700-$1,000 set of irons.
Maybe I just dont get it, but to me it seems kinda silly to have headcovers for all your other clubs but not have them for your irons.
Explain.

Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S


As far as i know, it'd be very beneficial if you have iron covers for forged irons because the steel used tends to be softer. Hence they are prone to getting beat up quicker.

And honestly, who cares what other people think. If you want to get yourself iron covers, get'em and F the rest who disagree. You are 100% right about spending the dough for the irons, so you might as well protect them too.

I know i'm going to invest in some when i get my new clubs!
R7 Superquad 10.5* REAX regular flex shaft
FT 5 wood
675XC forged irons 3-PW, True Temper DG SL stiff(S300) shafts
55* BeCu sandwedge
e6+ balls or ProV1
Cougar X-cat putter (odyssey 2-ball rip-off)

Im just curious as to why people seem to think that iron covers are a waste of money. If someone out there thinks iron covers are stupid, thats cool, but its not going to make me not put headcovers on my irons.

Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S


When I see Arnold Palmer, Jack Nicklaus, Lee Trevino, Chi Chi Rodriguez, Tiger Woods, Padraig Harrington, Paula Creamer . . . well, you get the picture . . . using iron covers, then I'll think about getting some.


If I had em, I'd only use them when they're in the trunk. Putting on a headcover after a driver, 3W, or putt gets annoying as it is.
What I Play:

Driver: Sasquatch SUMO² 9.5º Stiff
Hybrid: HiBore 16º (3W replacement)
Irons: Staff Ci6 3-PW StiffWedges: Vokey Spin Milled 54.10 60.04Putter: Newport Studio Style 35"Ball: Pro V1xAge: 15

Weight. Convenience. The fact irons take a beating anyways just ices it. I do cover my driver when in transit to and fro but not when on the course. I probably should as I do have some good wear and tear on the club head and one small crack on the face at the top that isn't growing. Going on 2.5 years though so I'm not too worried about it any longer. I do cover the putter though. That one has to stay purty.

Iron covers trap in moisture so they cause your clubs to rust easy. If you make sure to wipe it off before you put it back you're alright.

Also, it takes a while to fumble around with them in the cart and people just dont wanna deal with that.

If you wanna use them go for it, just make sure you wipe off your clubs and try not to fumble with them

In my Extreme Sport Stand Bag
Driver: 4DX D-Spec Driver 10.5* Stiff UST SR3
3W: F-60 15* Regular Fujikura E150 Fit-On
Hybrids: 4DX Ironwoods 20* 23* Regular UST SR3
Irons: 4DX CB 5-PW Stiff True Temper ST-90Wedges: Vokey 50* 56*Putter: SabertoothBall: DT Roll


i have covers on all my clubs except my vokey theres notin gleft for it to hit lol...... and when i go over bumps and see that everyones clubs are chattering and smashing together i feel bad for them and good for me cause it aint my clubs

In My: Black Titleist sc75 Bag
Driver:  G20 10*

Irons: Soon To Be Titleist 712 CB/MB Combos 
Wedge: 60* Spin Milled Oilcan

Putter: Circa 62 Model 1Putter #2 Vintage Pal

Ball:  E6


  TitleistWI said:
Lately Ive been considering getting iron covers and Ive read a few old threads on here about that subject and its clear that most people dont use iron covers and dont see a need to.

I completly agree. I just bought some brand new Walter Hagen forged irons and need head covers. I played with them for the first time and noticed that the steel was soft and covers were nessary.


When I got my Mizuno irons I quit using headcovers. The Mizuno website recommends against it because the cover trap moisture on the club.

Brad Eisenhauer

In my bag:
Driver: Callaway Hyper X 10° | Fairway Wood: GigaGolf PowerMax GX920 3W (15°) | Hybrid: GigaGolf PowerMax GX920 3 (20°)
Irons: Mizuno MX-25 4-PW | Wedges: GigaGolf Tradition SGS Black 52°, 56°, 60° | Putter: GigaGolf CenterCut Classic SP3

Ball: Titleist ProV1x or Bridgestone B330S


I think my main concern with head covers would be the add. time needed. I prefer spending this time on my preshot routine than to fumble around with these things.

Its true that my Mizuons get dents over the time but that still doesnt convince me personally to use headcovers since i probably just buy new irons when it gets too intense.

Burner 9°
FW Burner 15°
Burner Rescue 19°
MP67 4-PW
CG10 50° CG12 DSG 54° & 60°


  kafka01 said:
I think my main concern with head covers would be the add. time needed. I prefer spending this time on my preshot routine than to fumble around with these things.

how long do you think it takes??? it literally takes me 3 seconds to take the cover off and be at my ball and 1 second when you go to put it back on

In My: Black Titleist sc75 Bag
Driver:  G20 10*

Irons: Soon To Be Titleist 712 CB/MB Combos 
Wedge: 60* Spin Milled Oilcan

Putter: Circa 62 Model 1Putter #2 Vintage Pal

Ball:  E6


Note: This thread is 3134 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • True, true. I should do that. He really did go off during that run, I remember now. Appreciate the context. 
    • I am pretty sure it is this. Word probably got around. The reports coming out now is that he bombed some interviews, and when pressed about it during the interview just basically had a horrible response. His attitude is crap. There are stories about him throwing his players under the bus at Colorado. I get it, he's not playing behind the best O-Line or have the best weapons (outside of Travis Hunter). That is bad leadership, bad attitude.  Also, it could be his dad as well. Who would want Prime Time chattering.  Go watch the playoff run. Four top 10 teams. He was elite. The Penn State game happened with our starting left guard shifting to left tackle and going up against the 3rd pick in the NFL draft. He had two big mistakes early. The pick, which looked to be a defensive play call to trap that RPO quick out, and then the fumble off his knee. He won the game besides that. 
    • Day 2: Speed training session
    • Yea I admit too I had more of a 2nd round evaluation on him, where I wrote in my notes "Maybe Geno Smith" after watching a couple games. Too many screens, too many sacks, awkward throwing motion at times, low velocity at times. Too low. At other times though I thought he made some nice throws, hence why I thought he should've probably gone around round two. So to me the free fall is surprising to an extent, but of course, it all makes sense now that he's still sitting there. He probably bombed his interviews too, and I know almost nothing of his personality. I love sports betting, hence why I love following this stuff, but there's only so much I can know from the outside looking in. But yea, my 2nd round guess was smart to an extent, but also bad now that he's still on the board and it's pick 4.17 at the moment. I see. Thanks for the take, I know you watch every game of theirs.  I just watched some of the Penn State game and can see both the upside and why he's still available. But I can get on board as well that Howard has more upside than Sanders too. Tougher competition, showed some growth from K-State to Ohio State.  I guess the question marks with Howard are processing and accuracy. Yea especially for us as fans. We don't get to interview these guys or talk to their college coaches to get a better idea of what they'll be like to work with everyday. We don't know who will end up being more durable and whose body will just naturally break down over the next few years. Some guys are great talents who go to terrible situations too, who are poor system fits in failed regimes. Other guys hit the jackpot with the perfect role on a great team in a weak division. There are so many variables. 
    • The 2021 Ohio State WR room! 🔴OHIO STATE BUCKEYES⚪️ (@buckeyesfansonly_) • Instagram photo 3,470 likes, 33 comments - buckeyesfansonly_ on April 25, 2025: "Ohio State’s 2021 wide receiver... they are on a stretch of 4 straight years with a round 1 WR taken. If they get on next year, then they will get one the year after. If they get to 6, it might be a record never broken. They already hold the record.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...